Question about Blaupunkt Televison & Video

Open Question

How do you delete files/programmes from a USB stick on a Blaupunkt tv?

TV is a LED/DVD/USB combo

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
Danmart
  • 291 Answers

SOURCE: universal tv remote control codes for a hikona tv/dvd combo

you have to set the code for TV alone, then code for DVD

Posted on Apr 27, 2008

Ad
  • 89 Answers

SOURCE: need driver file for lightwave usb tv av combo driver lw-utv

go to www.driveragent.com we use them daily.

Posted on Jul 31, 2009

  • 8457 Answers

SOURCE: dvd polaroid tv/dvd combo tda-o3211c dvd stop

Not worth repairing,just get a seperate DVD player hook to the tv.It very cheap these day.

Posted on Dec 05, 2009

  • 1274 Answers

SOURCE: Need remote code for gpx tv/dvd combo

I have a code of 749 for it,if not ,try this,press and hold TV button until all the lights come on,press and release the POWER button,press the up button once a second while pointing the remote at the TV,when the remote has found the correct code,the TV will turn on or off,press the pound # button, if it is correct, it will blink three times. ..hope this helps..

Posted on Mar 29, 2010

SOURCE: tv dvc combo remote codes coby tv

hi! i have here a two codes for your coby tv 1460, 2380. just try them hope this helps! goodluck!

Posted on Jun 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When playing a movie from a USB stick my 55 inch Blaupunkt tv stops after 2 hours and goes back to the start,very frustrating. Any ideas


The entire movie has not been recorded of the flash drive. There was not enough GB storage for the movie. Either use a flash drive with more capacity or record the movie on a DVD

Jul 24, 2018 | Blaupunkt Televison & Video

1 Answer

Codes for one for all remote


Cable:

Americast 0899 Bell South 0900 Director 0476 General Instrument
GoldStar 0144 Hamlin 0009
Jerrold
Memorex 0000
Motorola
Pace 0237
Panasonic
Paragon 0000
Philips
Pioneer
Pulsar 0000 Quasar 0000 Runco 0000 Samsung 0144
Scientific Atlanta
Sony 1006 Supercable 0276 Toshiba 0000
Zenith 0877 1877 0477
0000 0525 0899
0476 0810 0276
0476 0810 0276
0476 0810 0276
0000 0107

DVD:

Apex Digital 0672 0717 0794 1056 0755 0797 1100 0796 1061 Axion 1072
Blaupunkt 0717 Blue Parade 0571 CineVision 0876 Curtis Mathes 1087
CyberHome
Daewoo 0784 Denon 0490 Dual 1068 DVD2000 0521
Emerson
Enterprise 0591 Fisher 0670 Funai 0675
GE
Go Video
GPX 0699 Greenhill 0717 Hitachi 0573 Hiteker 0672
1024 1023 0816
0591 0675

DVD JVC
DVD Kenwood
DVD KLH
DVD Koss 0651 DVD Lasonic 0798
DVD Magnavox
DVD Marantz 0539 DVD Microsoft 0522
DVD Mintek
DVD Mitsubishi
DVD Nesa 0717 DVD Norcent 1003 DVD Onkyo 0503 DVD Oritron 0651
DVD Panasonic
DVD Philips
DVD Pioneer
DVD Polk Audio 0539 DVD Proscan 0522 DVD Qwestar 0651
DVD RCA
DVD Rotel 0623 DVD Rowa 0823
DVD Samsung
DVD Sanyo 0670
DVD Shinsonic
DVD Sony
DVD Sylvania 0675 DVD Symphonic 0675 DVD Technics 0490 DVD Theta Digital 0571 DVD Toshiba 0503 DVD Tredex 0799 DVD Urban Concepts 0503 DVD Xbox 0522
DVD Yamaha
DVD Zenith
Satellite AlphaStar 0772
0558 0623 0490 0534 0717 1020
0503 0675
0839 0717 0521 1521
0490 1762
0503 0539 0646 0525 0571
0522 0571 0717
0573 1075 0820
0533 0839
0533 1533 0864 1033
0392 0566 0639 0247 0749 1749 0724 0819 1856
Satellite Dish Network System
Satellite Dishpro
Satellite Echostar
Satellite Expressvu 0775 Satellite GE 0566 Satellite General Instrument 0869 Satellite GOI 0775
Satellite DirecTV
1005 0775 1005 0775 1005 0775
Satellite Hitachi
Satellite HTS
Satellite Hughes Network Systems Satellite JVC
Satellite Magnavox
Satellite Memorex
Satellite Mitsubishi
Satellite Motorola
Satellite Next Level
Satellite Panasonic
Satellite Paysat
Satellite Philips
Satellite Proscan
Satellite RadioShack
Satellite RCA
Satellite Samsung
Satellite SKY
Satellite Sony
Satellite Star Choice
Satellite Toshiba
Satellite UltimateTV
Satellite Uniden
Satellite Zenith
TV AOC
TV Admiral
TV Advent
TV Aiko
TV Akai
TV Alfide
TV America Action
TV Anam
TV Apex Digital
TV Audiovox
TV Baysonic
TV Bell & Howell
TV Bradford
TV Broksonic
TV CXC
TV Candle
TV Carnivale
TV Carver
TV Celebrity
TV Celera
TV Changhong
TV Cineral
TV Citizen
TV Clarion 0819
0775
"0749, 1749" 0775
0724 0722
0724
0749
0869
0869
0247 0701
0724
0749 1749
0392 0566
0869
0392 0566
1276
0856
0639 1639
0869
0749 1749
0392 0639
0724 0722
0856 1856
0030
0093 0463
0761 0842
0092
0702 0030
0672
0180
0180
0748 0765 0767
TV Contec 0180 TV Craig 0180 TV Crosley 0054
TV Crown
TV Crown Mustang 0672
TV Curtis Mathes 0047 0054 0060 0702 1147 1347
TV Daewoo
TV Denon 0145 TV Dumont 0017
0154 0236 0171 0623
TV Durabrand
TV Electroband 0000
TV Emerson
TV Envision 0030 TV Fisher 0154
TV Fujitsu
TV Funai
TV Futuretech 0180
TV GE 0047 0051 1347
TV Gateway
TV Gibralter
TV GoldStar
TV Gradiente 0053 TV Grundig 0672 TV Grunpy 0180 TV Hallmark 0178 TV Harman/Kardon 0054 TV Harvard 0180 TV Havermy 0093 TV Hello Kitty 0451
TV Hitachi
TV Infinity 0054 TV Inteq 0017 TV JBL 0054 TV JCB 0000
TV JVC
TV Jensen 0761 TV KEC 0180
TV KLH
TV KTV
TV Kenwood 0030 TV Kioto 0706
TV LXI TV MGA TV MTC 0047 0054
0150 0030 0178 0060 0030
0180 0672
0451 1661
0003 0171 1034
0683 0809 0180 0171
1755 1756 0017 0030 0030 0178
0145 1145
0463 0053
0765 0767 0180 0030
TV Magnavox TV Marantz TV Matsushita TV Megatron TV Memorex TV Midland 0054 0706 0030 1454 1254 0054 0030
0250 0650
0178 0145
0154 0250 0463 0150 0178 0047 0017 0051
0093 0150 1250 0178 0836
TV Mitsubishi
TV Motorola 0093 TV Multitech 0180
TV NAD
TV NEC
TV NTC 0092
TV Nikko
TV Norcent
TV Onwa 0180
TV Optimus
TV Optonica 0093
TV Orion
TV Panasonic
TV Penney
TV Philco
TV Philips
TV Pilot 0030
TV Pioneer
TV Portland 0092 TV Prima 0761 TV Prism 0051 TV Proscan 0047 TV Proton 0178 TV Pulsar 0017
0166 0866
0051 0250 0650
0047 1047 1147 1247 1347 1447 1547
TV RadioShack
TV Realistic
TV Runco
TV SSS 0180
TV Sampo
TV Samsung
TV Sansei 0451 TV Sansui 0463 TV Sanyo 0154 TV Scotch 0178
TV Quasar TV RCA
TV Scott
TV Sears
TV Semivox 0180
0156 0178 0866 0030 1704 0704
0030 0178 0092 0748 0824
0154 0250 0166 0650
0236 0463
0051 0250 0650
0047 0156 0051 0060 0030 0178 1347
0054 1661 0463 0030 0145 0054 1454 0690
0047 0154 0180 0030 0178 0154 0180 0030 0178
0017 0030
0030 1755
0060 0702 0030 0178 0812
0236 0180 0178
TV TV TV TV TV TV TV TV TV TV TV TV TV TV TV TV TV TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV
TV DVD Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo Semp 0156 Sharp 0093 Sheng Chia 0093
Sony
Soundesign
Squareview 0171 Starlite 0180 Supreme 0000
Sylvania
Symphonic
TMK 0178 TNCi 0017 TVS 0463 Tandy 0093
Technics
Techwood 0051
Teknika
Telefunken 0702
Toshiba 0154 0156 0060 1356 1656 1704 0650
Toshiba 1256 Vector Research 0030 Victor 0053 Vidikron 0054 Vidtech 0178 ViewSonic 1755
Wards
Waycon 0156
White Westinghouse
Yamaha 0030
Zenith
Sylvania 0675 America Action 0278 Audiovox 0278
Broksonic
Citizen 1278 Colt 0072 Curtis Mathes 1035 Daewoo 1278
0000 1100 0810 0180 0178
0054 0030 0171 0180 0171
0051 0250
0054 0180 0150 0060 0092
0054 0030 0178 0866
0463 0623
0017 0463 0178 0092
0479 1479
TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo TV VCR Combo VCR
VCR VCR VCR VCR VCR VCR VCR VCR VCR VCR VCR VCR VCR VCR VCR VCR VCR VCR VCR VCR VCR VCR VCR VCR
Sears 0000 1237 Sony 0000 1232 Sylvania 1781 Symphonic 0000
Thomas 0000
Toshiba 1145 0845 Zenith 0000 1479 0479 ABS 1972
Admiral 0048 0209 Adventura 0000
Aiko 0278
Aiwa 0037 0000 Akai 0041 Alienware 1972 America Action 0278 American High 0035
Asha 0240
Audiovox 0037 0278 Beaumark 0240
Bell & Howell 0104
Broksonic 0184 0121
Calix 0037
Canon 0035
Carver 0081
CCE 0072 0278 Citizen 0037 0278 1278 Colt 0072
Craig 0037 0047 Curtis Mathes 0060 0035 Cybernex 0240 CyberPower 1972
Daewoo 0045 0278 1278
Satellite PVR Combo Satellite PVR Combo PVR
PVR
PVR
PVR
PVR
PVR
Cable PVR Combo Cable PVR Combo Cable PVR Combo TV VCR DVD Combo RCA 0392 Sony 0639 Panasonic 0616 Philips 0618
ReplayTV
Sonic Blue
Sony 0636
Tivo
Motorola 1376
Pioneer
Scientific Atlanta 1877 Sharp 0807
0614 0616 0616 0614
0636 0618
0187 0007

Dec 24, 2015 | One For All Televison & Video

1 Answer

Blaupunkt 40/148 tv. how do i record programmes to usb ?


I could not find an owners manual for this TV but if it is like most TV's usb is for playing media, Not recording. I found a site that talks about your TV. The first reviewer explains the usb is for watching (not recording). I have a different TV and same holds true. IF you really want to record TV and have a computer with Windows 7 or Windows 8 you have capability to record to the computer and then move it to a usb to watch it elsewhere.

Customer reviews for Blaupunkt BLAUPUNKT 40 148


I hope this helps.

Jan 29, 2015 | Televison & Video

1 Answer

Want to copy a TV programme I have on DVD to an 8GB Sandisk backup stick


Hi,
Explore the DVD and just copy the files with VOB extension to USB Stick. These are the Video Files and can be played on any PC. You may also use Any DVD Ripper Software to extract the video from DVD and convert it to any other format such as avi.

Hope it helps! Good Luck! Thanks for using Fixya!
CreativeTECH

Sep 09, 2011 | SanDisk 2GB Cruzer Micro SDCZ62048A10 Hard...

1 Answer

I downloaded the firmware for my DVP3580 dvd player from the Philips website and unzipped it to a usb stick. It shows up on the stick as a VLC video file (VLC is a programme I normally use to watch...


You may want to load the update to a CD and try it. The web site should have good instruction on either load device. I had to go to my System Setup on the TV screen to make it work.

Jul 22, 2011 | Philips DVP3982 DVD Player

1 Answer

Purchased a Technika Model 19-220. 8 months ago never used the DVD recorder because we never had freeserve. Now we are connected to Freeserve the DVD will play DVD's but no accept blanks for recording...


Thanks for posting to Fixya and it is my pleasure to guide you.

"Will not accept blanks for recording it says No Disc."

from Technika manual: Start Quote
VCR/DVD Recorder; I have connected the TV to my VCR or DVD Recorder via SCART but it is not recording. In addition to connecting via SCART, you should connect the aerial cable from the wall socket to your VCR/DVD Recorder and another aerial cable from the VCR/DVD Recorder to the TV." Also; "Check the DVD is a region 2 disc - to change the region of the DVD player, refer to section 'Changing Regions'.

Note: USB record function is only avilable in Digital/Freeview TV/Radio mode. Due to copyright laws and illegal copying/recording it is not possible to record to/from any other input/output source.

DVD MENU: To access this menu, press [MENU] button on the remote control. TV System - Choose from the following options. NTSC; Normally used for discs from North America, Japan etc.
Auto; For both NTSC and PAL. This TV/DVD player is pre-set to play Region 2 DVDs.
Tip: This television contains one TV tuner, therefore it can only record the channel you are watching or record one channel while the television is in standby mode.

Tip: This TV/DVD player is pre-set to play Region 2 DVDs.
End Quote

You can not record to a DVD, according to their manual. That is why you get the no disc error. It does not have the play sector at the beginning of the DVD. You can record to USB Flash Drive however.

Quote:
USB RECORD - DIGITAL/FREEVIEW MODE
Built into this television is a USB record facility. This function is available in Digital/Freeview mode when used in conjunction with a compatible USB memory stick or USB Hard drive. The benefi ts of this are as follows:
• Pause live TV/Radio and then playback, fast forward and rewind (up to live TV)
• One button record, if you decide you want to record the current programme
• Easy programmable recording from the 7 day TV Guide
• Record TV/Radio and watch/listen back on your computer/laptop
Due to the nature of the product, it is necessary to use a high speed USB memory stick (as the TV reads from and writes to the memory stick at the same time, some memory sticks may not be suitable). You can purchase high speed memory sticks from some computer stores, alternatively, we have a selection of tested and compatible memory sticks available to purchase directly from the helpline/web site. These are available in 4GB, 8GB and 16GB. (Please check the web site/helpline for latest specifications and prices). End Quote

Good luck and please post back that you this has solved your problem and click thumbs up of your success or that I can be more helpful.

Jun 06, 2011 | Televison & Video

1 Answer

I need help to get a code for my sanyo tv and how to set it up.


Hi
Configuring codes:
1.Turn on a desired device (VCR or DVD player)

2. On the remote control, press a device key once (i.e., DVD/VCR,
CBL/SAT or TV).

NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo, or TV/VCR/DVD Player Combo press DVD/VCR once. After programming a VCR Combo device, you will be able to control channel selection,volume, and VCR functions.

To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD/VCR once. After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions.

To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.

3. Press and hold SET until the LED (red light) blinks twice,
then release SET.

4. Use the Manufacturer’s Codes to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly,
the LED will blink twice.

5. Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2 to 5, trying each code for your brand until you find one that works. If it still doesn’t work, try Searching For Your Code on next page

Auto Code Scan:
1.On the remote control, press TV once.

2. Press and hold SET until the LED (red light) blinks twice, then release SET.

3. Enter 9 - 9 - 1.The LED will blink twice.

4. Aim the remote control at the TV and slowly press POWER button.Stop when the TV turns off

5. To lock in the code, press and release SET.The LED will
blink twice.

6. To search for the codes of your other devices, repeat steps
1 to 5, but substitute the appropriate device key for the device you are searching for.

Code for sanyo tv is 0154
Thank You

Sep 13, 2010 | One For All URC-3021 Remote Control

1 Answer

I need to program the one for all URC-3021B00 to my sony tv


Hi,
Configuring codes:
1.Turn on a desired device (VCR or DVD player)

2. On the remote control, press a device key once (i.e., DVD/VCR,
CBL/SAT or TV).

NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo, or TV/VCR/DVD Player Combo press DVD/VCR once. After programming a VCR Combo device, you will be able to control channel selection,volume, and VCR functions.

To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD/VCR once. After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions.

To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.

3. Press and hold SET until the LED (red light) blinks twice,
then release SET.

4. Use the Manufacturer’s Codes to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly,
the LED will blink twice.

5. Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2 to 5, trying each code for your brand until you find one that works. If it still doesn’t work, try Searching For Your Code on next page

Auto Code Scan:
1.On the remote control, press TV once.

2. Press and hold SET until the LED (red light) blinks twice, then release SET.

3. Enter 9 - 9 - 1.The LED will blink twice.

4. Aim the remote control at the TV and slowly press POWER button.Stop when the TV turns off

5. To lock in the code, press and release SET.The LED will
blink twice.

6. To search for the codes of your other devices, repeat steps
1 to 5, but substitute the appropriate device key for the device you are searching for.

Code for sony tv are 0000, 1100, 0810



Thank You

Sep 13, 2010 | One For All URC-3021 Remote Control

1 Answer

Im trying to program a remote the tv is a zenith


Configuring codes:
1.Turn on a desired device (VCR or DVD player)

2. On the remote control, press a device key once (i.e., DVD/VCR,
CBL/SAT or TV).

NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo, or TV/VCR/DVD Player Combo press DVD/VCR once. After programming a VCR Combo device, you will be able to control channel selection,volume, and VCR functions.

To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD/VCR once. After programming a DVD Combo device, you will be able to control channel selection, volume, and DVD functions.

To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.

3. Press and hold SET until the LED (red light) blinks twice,
then release SET.

4. Use the Manufacturer’s Codes to locate the type of device and brand name and then enter the first four-digit code for your device. If performed correctly,
the LED will blink twice.

5. Aim the remote control at the device and press POWER once. The device should turn off. If it does not, repeat steps 2 to 5, trying each code for your brand until you find one that works. If it still doesn’t work, try Searching For Your Code on next page


Auto Code Scan:
1.On the remote control, press TV once.

2. Press and hold SET until the LED (red light) blinks twice, then release SET.

3. Enter 9 - 9 - 1.The LED will blink twice.

4. Aim the remote control at the TV and slowly press POWER button.Stop when the TV turns off

5. To lock in the code, press and release SET.The LED will
blink twice.

6. To search for the codes of your other devices, repeat steps
1 to 5, but substitute the appropriate device key for the device you are searching for.


Thanx

Aug 06, 2010 | One For All URC4110 Remote Control

1 Answer

Recording on the Meos 20'' LCD-DVD Combo 2009 model


YOU CANT RECORD FROM A SCART TO USB, THE SCART IS IN ONLY AND ANALOGUE. YOU SHOULD HAVE A USB PORT ON THE TV TO PLUG IN YOUR STICK OR PORTABLE HARD DRIVE

Aug 31, 2009 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

56 people viewed this question

Ask a Question

Usually answered in minutes!

Top Blaupunkt Televison & Video Experts

Marvin
Marvin

Level 3 Expert

85178 Answers

Vernon Taylor

Level 3 Expert

5747 Answers

antoniorojas

Level 2 Expert

280 Answers

Are you a Blaupunkt Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...