Question about KitchenAid Food Processors

1 Answer

KFP0711 Kitchenaid food processor won’t turn on even when put together. Just opened and never been used.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • KitchenAid Master
  • 1,351 Answers

Read the handbook and make certain you are assembling the bowl, lid and pusher correctly, they can all play a part in activating the safety mechanisms that put the appliance in the mode that will allow it to be started.

Posted on Nov 24, 2017

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 145 Answers

SOURCE: Need to clean inside of handle on KitchenAid food processor

The plastic for the work bowl / handle is molded and one piece and cannot be disassembled. My best recommendation is to call Kitchenaid customer service to see what recommendations they have. Within one year warranty, they may replace the work bowl at no cost.

Their toll-free number is: 1-800-541-6390.

Posted on Jul 07, 2009

  • 89 Answers

SOURCE: Need owners manual for kitchenaid food processor model # KFP740CR

http://www.kitchenaid.com/flash.cmd?/#/page/home
this site should help you out.
one thing, you can chop onions without crying.

Posted on Nov 08, 2009

  • 1212 Answers

SOURCE: My kitchenaid food processor won't work

Does the actuator push down far enough to catch the button at the bottom? I repaired one simply by adding a vinyl screw cover to the top of the button so it was tall enough to be reached by the actuator.

Posted on Dec 20, 2011

Testimonial: "really helpful thanks"

  • 1010 Answers

SOURCE: where do you turn on the kitchenaid mini food processor

I think it will start, when you close the lid

Posted on Mar 29, 2013

t_w_miller_5
  • 90 Answers

SOURCE: Very frustrated with kitchenaid food processor - using any slicing disk only the first batch of food works, when you put in the 2nd batch nothing happens

Mine is older and works fine once I realized bowl has to be snapped into place before the cover and then the cover has to be locked in. This activates a small button at the base of the bowl that activates a safety switch.

Posted on Jan 03, 2015

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I removed the handle to clean under it and the parts came out and I cannot figure out how to put it back together.


I haven't seen any Kitchen Aid processors where the handle part of the bowl is dismantlable. I think you will find it is broken and you are up for a new bowl. The cover is normally glued on with no intention that it was ever going to be taken apart.

Sep 03, 2015 | KitchenAid KFP0711 KFP0711OB 7-Cup Food...

1 Answer

I cant seem to get my food processr to work Model #KFP07110B0 Ser # WH22950662 vs


perhaps if you contact Kitchenaid website and tech support they can assist .

Aug 12, 2015 | KitchenAid KFP0711 KFP0711OB 7-Cup Food...

1 Answer

Kitchenaid Food processor won't turn on, I was trying to puree steamed vegetables and ground chicken together for my 7 month olds baby food. was working intitially but suddenly stopped and wont start.


The container may have been incorrectly installed in the base or installed but not locked in position. Also, the speed switch may have picked a bad time to fail.

Oct 28, 2014 | KitchenAid KFP0711 Food Processor, 7 Cup

1 Answer

My food processor blade keeps popping up (loose) when I put food into it.


You will probably need to replace the sleeve on the motor shaft and the blade. If overloaded the shaft can spin inside the blade which wrecks the connection between them. Replacing both together is the correct solution.

May 16, 2014 | KitchenAid Chefs Chopper KFC3100 3 Cups...

2 Answers

My kitchenaid food processor won't work


Does the actuator push down far enough to catch the button at the bottom? I repaired one simply by adding a vinyl screw cover to the top of the button so it was tall enough to be reached by the actuator.

Dec 20, 2011 | KitchenAid Food Processors

1 Answer

Kitchen Aid Little Ultra Power, 4 yrs old, suddenly stopped.


I HAVE A BASE UNIT WITH NO MIXING BOWL,
HARDLY USED , CAN PURCHASE CHEAP
RESPOND TO garyhp@cox.net

Jul 13, 2009 | KitchenAid KFP450 Ultra Power 7 Cups Food...

2 Answers

I have a kitchenaid food processor and the bowl is tightly set on the right side of center. I can't straighten it out and when I try to move it, it sounds like I'm cracking plastic. It won't run! Any...


Items required:
-dishwasher
-detergent
-lemonade or other citric liquid
-poochy
-skillz

Step 1:
gently position poochy around tube in center of bowl. Fill halfway with lemonade or other citric liquid.

Step 2: Put lid of processor on and put entire unit in dishwasher. Turn on power scrub cycle.
The dishwashing cycle will help the citric acid to activate the poochy.

Step 3: Use skillz to wriggle the bowl off the processor. Empty out poochy remains.
Congratulations! YOU'VE GOT SKILLZ!

Jun 08, 2009 | KitchenAid KFP600 Ultra Power 11 Cups Food...

2 Answers

I need a manual for a Kitchenaid Food Processor Model #KFP600WH


The Kitchenaid website doesn't recognize the model number you gave. Could it possibly be KFP760? If so, then here's a link to the free downloadable manual.

http://www.kitchenaid.com/assets/pdfs/product/ZUSECARE/KFPW760OB_Use%20and%20Care.pdf

Dec 02, 2008 | KitchenAid KFP670 Ultra Power Food...

1 Answer

I have a cusinart pro classic, went to use it yesterday, filled it and turned in on, got nothing. i tried a different plug and still nothing. it is not even making a sound.


It usually goes something like this, with minor variations depending on model number:
1. Remove the work bowl completely from the base
2. Plug the food processor in and turn it on
3. Use a pen to depress the dark grey/black button on the base – if it spins, proceed
4. Put the work bowl on the base with the handle facing the front of the food processor – slide the work bowl until it locks - the white tabs show in the openings on the bottom of either side of the workbowl
5. Place the lid on the workbowl with the tab slightly left of the center of the workbowl handle – slide the lid counterclockwise until it won’t slide any more
6. Place the pusher sleeve in the feeder tube of the lid with the lock facing the front of the food processor (may vary depending on model)
7. Slide the lock to the right into the locked position
The food processor should now work
-Tha Mp3 Doctor

Oct 19, 2008 | Cuisinart DLC-10S Pro Classic Food...

3 Answers

Lid of food processor


i am also having the same problem. it happened as soon as i got done putting in some parmesan and grated it. never happened before and i've got a few cups of parmesan cheese just sorta wasting away inside the processor. very tempted to break the damn thing open and just buy a new processor from a different company.

Dec 01, 2007 | KitchenAid KFP670 Ultra Power Food...

Not finding what you are looking for?
Food Processors Logo

Related Topics:

2,211 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Processors Experts

ismash55

Level 2 Expert

138 Answers

john h

Level 3 Expert

22401 Answers

Brad Brown

Level 3 Expert

18108 Answers

Are you a KitchenAid Food Processor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...