Question about JVC Audio Players & Recorders

Open Question

My jvc dvd home theater model A35 is displaying error press power bottom off /on to rest

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
techman

Larry Dillon

  • 3130 Answers

SOURCE: Home theater won't start playing DVD

If a disc will not spin, A- the laser may not be focusing on the disc, as it must do this before it will spin and read the TOC. ( table of contents) B- you could have a fault in the spindle motor circuit or the motor could be bad. You will need to find an authorized servicer if you do not understand solid state repairs. Good Luck PS please dont forget to rate this.

Posted on Oct 14, 2006

Ad

Anonymous

SOURCE: DVD MALFUNCTION [MODEL PIONEER XV-DV131 (DVD/CD HOME THEATER]

I have the same problem with my XV-DV333. Search on inet and this came up: "... Pick Out One Of These! But I am unable to select any region using the remote control or the buttons on the player. What do I do? You need to get a Pioneer Service Remote. When you have it you should press: [ESC] [A.MON] [Numbers], where [Numbers] correspond to the region number you want to set. Be aware that you can only set this once, if you set the wrong region number for your area, there is no turning back. " WTF! Am I supposed to get a service remote to get this thing working again. I haven't done anything and it worked before:/

Posted on Sep 08, 2007

Anonymous

  • 1 Answer

SOURCE: PL-D2000 DVD Home theater System

Turn on the player for about an hour untill it heats up and then play the disc. Most probably it will work. If not you will have to replace the lens or card.

Posted on Dec 30, 2007

Priya darshan

  • 3422 Answers

SOURCE: unlock a panasonic dvd home theater to region 2

Hi,

You can buy the codes from HERE or HERE

Goodluck..

Posted on Mar 19, 2008

Anonymous

  • 5 Answers

SOURCE: not getting any power

Probably a blown fuse. If you have a warranty or can return it do that, if not unplug it, open it up and there should be a 250 volt glass type fuse. pull it out and make sure it is blown. If it is replace it at radio shack. If it isnt check for loose wires around the power cable and the transformer.

Posted on Feb 27, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

If press eject button,it's showing LOCKED.what can i do?


You may try power resetting the unit and check if it helps. To power reset, turn OFF the DVD player and unplug the power cord from the electrical outlet for 30 seconds. Plug the power cord back into the electrical outlet and turn the player ON. Attempt to open the disc tray.

Depending on the model number of your DVD player, simultaneously press the POWER + STOP + EJECT buttons. If the disc tray still does not open, simultaneously press the DISC1 + STOP + EJECT buttons.
NOTE: This step may not apply to all models as DISC1 is not available on all DVD players.

If this does not work and if the DVD player has DISPLAY and PREV buttons, press and hold the DISPLAY+PREV buttons for two seconds to unlock the drawer.

Jan 21, 2015 | home Audio Players & Recorders

2 Answers

Home theater system jvc th-d60


have you used a different connector cable?

if not try that first

Aug 22, 2008 | JVC THD-50 System

1 Answer

The DVD player seems to immediately attempt DVD mode upon powering on, despite no disc being present. The display shows "ERROR, PRESS POWER OFF/ON TO RESTART" and no other action is possible...


You have an internal mechanical switch/sensor which failed and will need replacement.The reason it is giving this message because the sensor might have been stuck in a position when it was damaged. And also along with it some parts(semiconductors and capacitors needs to replaced too)need some checking too.

Jan 30, 2011 | JVC TH-A35 System

1 Answer

TROUBLE SHOOTING JVC DVD PLAYER DOES NOT SHOW COLOR PICTURE


Press and hole Scan Mode button for 2 seconds, Y/C will show in front display, use > to change to RGB then press OK.

Feb 25, 2009 | JVC TH-S11 Theater System

1 Answer

Sub won't power up


DVD reset procedure for TH-A10
1. Make sure there is no Disc in the tray.
2. Disconnect the power cord.
3. While Pressing "Stop" and "Open/Close" buttons together reconnect the power cord
4. Front display will show "TEST0".
5. Then the display will change to : "TEST1 JC2".
6. Press "Enter" button on the remote, display will show "EEPROM"
7. Press "Power" to shut unit off.
8. Reset is finished

Nov 16, 2008 | JVC TH-A10 System

1 Answer

Unlock code for jvc dvd


hi if you can help me i have a dvd jvc th-a35 and it wont play all the dvds what is the number or how i can unlock to play all dvds

Nov 25, 2007 | JVC TH-A35 System

1 Answer

TH-A35 receiver


You can't get 5.1 sound from a MP3 source !!! You get a 5.1 sound only from a good STEREO (analog) source or from a REAL 5.1 DVD audio track. Also check your "Autosurrond" setting on the remote-control.

Sep 14, 2007 | JVC TH-A35 System

2 Answers

Error message upon powering on


Unplug it for 10 seconds then plug it in again

Apr 23, 2007 | JVC TH-A35 System

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76140 Answers

stynger007

Level 1 Expert

33 Answers

Are you a JVC Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...