Question about DISH Network Televison & Video

Open Question

Trying to Program my Yamaha RAV501 Remote to my Dish Network Receiver.

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 374 Answers

SOURCE: need codes for a phillips magnavox for dish network controller

Follow this link and got to the remote section. Once there shoose the type of remote you have and select remote codes to get the ones for that particular remote that may operate the piece of equipment desired. I hope this is of assistance to yoiu and thanks for using Fix Ya. Please let me know if I can be of further assistance.
Jim

Posted on Nov 11, 2008

Ad
  • 374 Answers

SOURCE: got new remote and it won't work with my receiver, don't know how to program it

You probably just need to set the remote address on the remote to that on the receiver.

Press menu twice on the front panel of the receiver and you should be able to see the remote address displayed. If not just press and hold the SAT button down on the upper left of the remote until all lights light up across the top and release. Now key in 0-1 and press the pound sign. The SAT button will flash three times and now press the record button. You should now be able to control your programming and receiver. Thanks for using Fix Ya. If you need further he; let me know.

Posted on May 18, 2009

  • 56 Answers

SOURCE: dish 6.3 remote code for Samsung HT-X70 DVD/receiver

You will have to use the AUX button to program it to . Press AUX till lights light up then enter 4 digit code (if you have a 3 digit code use 1 as the first number) then press pund. And your good to go howevetr the only functions that may work is powere on an off.

Posted on Nov 12, 2009

CheriT Dish
  • 146 Answers

SOURCE: How do I program an Echostar 5.4 IR to control a

Hi, Cheri Torres with DISH Network Customer Service here. I came across your post recently and wanted to see if I could help. The best codes for the 5.4 IR remote are 500, 578, 514 and 758. I will also list here for you the instructions for addressing your DISH remote to your Sony TV. I hope you find these codes and instructions useful and if you have any further questions or concerns feel free to email directly at Cheri.Torres@Dishnetwork.com. Thanks and have a great day!

Instructions for addressing remote to TV.

  1. Turn the Television On
  2. Press and Hold the TV Mode button until all other mode buttons light up red.
  3. Enter the three-digit code using the buttons on the number pad.
  4. Press the pound (#) button once.
    Note: The LED will flash three times.
  5. Test functionality with the TV
  6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

Posted on Feb 24, 2011

  • 693 Answers

SOURCE: How do you program a

  • 1 Turn on the electronic device for which you'll be using your remote control. You will have to do this manually by pressing the "On/Off" button on the device.
  • 2 Locate either the "Code Search" or "Setup" button on your remote control. Which one you have will depend on the remote control.
  • 3 Hold that button for anywhere between five and 10 seconds. The light on your remote should then turn on. Depending on your remote, the light will either blink or remain on after you release the button.
  • 4 Press the corresponding button on your remote for your device that you are programming. In other words, if you want to program your remote to your television, you would press the "TV" button.
  • 5 Use the numbers on your remote to enter the three- or four-digit code for that particular device. The codes for your remote control will be found in the manual. Don't worry if you have lost the manual. You can find codes for practically every remote control on the market on the Internet. Visit the website of the manufacturer of the electronic device (TV, DVD player, among others) or log onto the "Universal Remote Control Codes" website. Once you have entered the code using the remote, you should notice that the light on your remote has turned off.
  • 6 Point your remote towards the device and attempt to turn the device off. If you can do so, you have programmed your remote correctly.
Programming Without Remote Control Codes
  • 1 Repeat Steps 1 through 4 found in Section 1.
  • 2 Begin pressing the "Up" channel button found on your remote. You will probably have to do this a few hundred times (or anywhere between five and 10 minutes). Once the channel changes, your remote will be programmed. Turn the device on and off using your remote to finish programming.
  • 3 Use the "Power" button if the channel button did not program your remote control. Again, you will probably have to press the "Power" button a few hundred times. Once the device that you are programming your remote to has turned off, you will know that you have programmed the remote control correctly.

Posted on Sep 14, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

IM TRYING TO PROGRAM MY RCA TV REMOTE TO DISH NETWORK. PRODUCT INFO. MODEL # L40FHD41YX9 SERIAL # J516C40DI SERIES # F2 PLEASE CONTACT ME WITH SOLUTIONS TO THE PROBLEM


Hi amielynn221, my name is Mike Houston of DISH Network and I see youwant to program the RCA remote to the DISH Network receiver. We do have thecodes to program our DISH remote to the RCA TV we do not have the codes toprogram the RCA remote to DISH Network receivers, I will send a link to helpwith these steps. http://remotefinder.rca.com/default.aspx?site=rca

Apr 19, 2011 | RCA RCRN04GR Remote Control

1 Answer

How do I switch from tv watching to listening to the included music channels on my motorola universal remote


gomabra

Would you elaborate further on what you are trying to do? Are you trying to program your universal remote to your DISH Network receiver or something else? I have provided a link with instructions on how to program the universal remote. Since it is not a DISH remote, we can't guarantee the function of that remote. I hope this helps.

http://www.ehow.com/how_5006714_program-motorola-universal-remote.html

Ray Calo
DISH Network

Feb 17, 2011 | DISH Network IR Remote Control

1 Answer

How do I program my innovage jumbo universal remote control to my dish network service?


Hi my name is Mike Houston of DISH Network and I see you're trying toprogram the Innovage Jumbo remote to the DISH receiver. The best way would beto use the DISH Network remote and have all units programmed to our remote,however if you want the universal remote programmed to the DISH receiver thefirst thing you want to do is press the Code Search button for 5 seconds, whenthe Red Light is on release the Code Search button and keep pressing the ShutDown button until the unit turns off. When it turns off press Enter to lock itin.

Jan 11, 2011 | Innovage Jumbo Remote Control

1 Answer

I have a Hitachi CLU-4362S remote that I am trying to program to operate my Dish network box and DVD. Anyone that can help me do this I would appreciate this.


Hi my nameis Mike Houston of DISH Network; I was going over your post and see where youwant the Hitachiremote to work the DISH receiver and your DVD. The best thing to use is theDISH Network remote to use all the functions of the receiver; I will send thislink http://www.hitachi.com and theinstructions of programming the Hitachiremote.

Jan 10, 2011 | Hitachi CLU-4324UG Remote Control

1 Answer

Dish Network IR Remote's SAT Mode Not Working ________________________________________ I programmed my Dish Network Remote (IR 1.5 Blue Button Remote Control ) for my Sharp 27F543 and now the remote would...


Hello, this is Nick Franta with DISH.

If you are trying to get the remote programmed to the receiver you can remove the smartcard from the receiver and that will prompt the system info screen. This will allow you to program the remote to the receiver.

If you need the process for programming the remote, here it is:
  1. Go to System Info screen (in this case -- obtain by removing smartcard from receiver)
  2. Hold down the SAT button until all mode lights light up.
  3. Enter a number between 1 and 15 using the numeric keypad on the remote.
  4. Press the pound (#) button
  5. Once the SAT button blinks three times, press record.
Hope this helps!

Jan 01, 2011 | DISH Network IR Remote Control

1 Answer

I am trying to program my AV3000 to work with my Dish Network Sat Receiver. Any help? Thanks so much.


Hi my nameis Mike Houston of DISH Network and I caught your post and see you want to programthe Sony RM AV3000 to the DISH Network receiver. To have full access to the menusand functions of the receiver it is best to use the DISH remote for the systemyou have, I will send a link for the RM-AV3000 to help with the setup for theremote. If you have any questions please e-mail me at michael.houston@dishnetwork.com.

Dec 26, 2010 | Sony RM-AV3000 LCD Touchscreen Remote...

1 Answer

Describe your yamaha receiver codes for dish Problem i need a code to let the Dish Network remote to work with the receiver


Try this link it should have all of the codes and istructions for programming our remotes.
http://www.dishnetwork.com/downloads/pdf/user_guides_and_manuals/Remote_Codes_Web_Page.pdf

Daniel Busa
DISH Network Customer Service

Dec 15, 2010 | Yamaha RX-V663 Receiver

1 Answer

How do i program my remote


ablesmichell

What are you trying to program your remote to? I have provided a link to the steps for programming the remote to your TV or receiver. If you are trying to program to another device, please respond to this site. If you are trying to program to your TV, I have also provide a link with the different codes for each type of TV. I hope this helps.

Remote instructions: http://www.dishnetwork.com/SupportSection/remote-setup
Remote codes:
http://tech.dishnetwork.com/departmental_content/techportal/content/tech/remotes/TechRemo5.3Code.shtml

Ray Calo
DISH Network

Nov 24, 2010 | DISH Network IR Remote Control

1 Answer

I FORGOT MY CODE ON MY UNIVERSAL REMOTE TO MY 301 RCA DISH NETWORK RECEIVER


Can you please provide more information to allow us to further assist you, for example could you please let us know the manufacturer of your universal remote? Also just to confirm, are you trying to program the remote to your television, or are you trying to program the remote to your 301 receiver? Or is it both? In addition, you may also be able to contact the manufacturer of your universal remote if you'd like and they can also provide further assistance in regards to the remote codes you are requesting for the remote if they are not included in the instruction manual that came with the remote.
-Kirstie DISH Network

Sep 09, 2010 | DISH Network 301 DTV Receiver

1 Answer

Dish program guide


this is a problem dish network is aware of and trying to fix, 311 receiver??

Aug 02, 2008 | DISH Network IR Remote Control

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

176 people viewed this question

Ask a Question

Usually answered in minutes!

Top DISH Network Televison & Video Experts

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Are you a DISH Network Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...