Question about Husqvarna Sewing Machines
Contact husqvarna directly for that. no one else has the code for your machine.
Posted on Mar 25, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
This should be your machine:
Sewingmanuals.com shows that they have this downloadable in Adobe PDF format here:
#37 in the list as of me posting this. You can get a CD version too but you'll just pay more and wait longer for the same thing. Once you have it print the manual (preferably both sides to keep it small) ang you'll have it. You can also peruse eBay to see if anyone is selling a manual but I doubt that will yield regular results. The machine looks to be pretty basic and standard but it's best you have the manual to get the most out of the machine. Also be sure to check the cleaning and lubrication section and go through the process so that the machine is in top working order before you put it into regular use - saves a lot of headaches.
Posted on Apr 28, 2008
Drivers are on the installation disk. 3D will have it on cd#1 and 4D on the dvd. With the disk in the drive, plug the dCard reader/writer in and use the "add new hardware" wizard to allow the drivers to install automatically. Now,either repeat this for each usb port or remember to always plug in to the same port.
Posted on Sep 06, 2009
Take to authorized Husqvarna Viking dealer for repair. This is not something that can be done by the owner. Check Husqvarna Viking website for dealer closest too you.
Posted on Sep 24, 2009
Sergers are not really meant to sew very thick material. The blades have a maximum amount of range, or thickness that they can reach to cut. If you go outside that range, get ready for a big repair bill! You can break loopers and even the needle plate when you "push" a serger. My advise would be to use you sewing machine for the, "pounding" work. The type of material matters too, A thick Quilt like fabric can be sewn becatuse it's not dense material. A thinner harder denim could max out at 3 layers because of it"s hard finish. If the fabric you're sewing isn't dense like, you could just need new knives.
Posted on Oct 14, 2009
Tips for a great answer:
Jan 11, 2018 | Husqvarna Sewing Machines
Nov 22, 2017 | Husqvarna Sewing Machines
Oct 21, 2017 | Husqvarna Sewing Machines
Mar 07, 2017 | Sewing Machines
Mar 18, 2016 | Sewing Machines
Apr 04, 2014 | Husqvarna Sewing Machines
Feb 04, 2014 | Husqvarna Designer I
Oct 31, 2009 | Husqvarna Viking 1
213 people viewed this question
Usually answered in minutes!