Question about Kodak Office Equipment & Supplies

Open Question

What bulb do I order for my Kodak 650H carousel projector

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 412 Answers

SOURCE: I am looking for a

The 650H uses a 300 watt, 120 volt lamp with an ANSI code of "ELH". You can order "ELH" lamps from Bulbman (www.bulbman.com).

Posted on Nov 04, 2010

Ad
  • 412 Answers

SOURCE: I have a Kodak 650H

The answer for the 2 machines is similar, but the repair is different. The clutch contact wire on the 650H has burned through the clutch contact. If it has just worn a notch in the clutch contact, you can bend the contact wire slightly to get it away from the notch. If the tip of the contact wire is burned off, you will be better off buying a used slide projector from someone, as parts for this generation of machines are long gone.
For the 4600 the problem is the same but the parts look different. Refer to the attached diagram for detail. The wire must rest at the center of the pad. You can use this diagram to roughly locate the similar parts in your 650H. Good Luck !!


jauburn_10.jpg

Posted on Jan 29, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My slide projector light won't come on. Every thing else works


Check the base where the bulb connects, pins get bent and don't connect to bulb at times

Nov 18, 2014 | Kodak CAROUSEL 650H ELH Light Bulb Lamp...

1 Answer

Where can I purchase a bulb for my Kodak Carousel 4400 Projector


FHS Bulbs can be found online (Amazon, Ebay, Bulbman etc) or if you have a "Batteries + Bulbs" outlet in your community, you can find it there. Good Luck !! Jim

May 13, 2014 | Kodak Carousel 5600 Slide Projector

2 Answers

My Kodak 650H slide projector carousel won't advance?


Chances are what you need is a new cycle solenoid LINK. They can be purchased from: www.micro-tools.com They should have instructions to help you install the new part, as well. Good Luck!!
Jim

Apr 10, 2014 | Kodak Carousel 600 Slide Projector

1 Answer

Need a replacement dek lamp with a asa code


DEK Lamps for Kodak Slide Projectors are almost always in stock at "Batteries PLUS Bulbs" retail outlets. If you don't have one of these stores in your area, try: www.bulbman.com

Jan 28, 2013 | Kodak Carousel 600 Slide Projector

1 Answer

I have a Kodak 650H carousel slide projector and it won't stop advancing the slides unless you turn it off. Will the answer for the 4600 work on this type also?


The answer for the 2 machines is similar, but the repair is different. The clutch contact wire on the 650H has burned through the clutch contact. If it has just worn a notch in the clutch contact, you can bend the contact wire slightly to get it away from the notch. If the tip of the contact wire is burned off, you will be better off buying a used slide projector from someone, as parts for this generation of machines are long gone.
For the 4600 the problem is the same but the parts look different. Refer to the attached diagram for detail. The wire must rest at the center of the pad. You can use this diagram to roughly locate the similar parts in your 650H. Good Luck !!


jauburn_10.jpg

Jan 26, 2011 | Office Equipment & Supplies

1 Answer

Need to purchase a new bulb assembly. where can I do that


Bulbs for Kodak (and many other brands) projectors can be ordered on line at: www.bulbman.com I hope this helps!!

Oct 25, 2010 | Kodak Carousel 4400 Slide Projector

1 Answer

I am looking for a replacement bulb for a Kodak carousel projector model # 650H where can I find one


The 650H uses a 300 watt, 120 volt lamp with an ANSI code of "ELH". You can order "ELH" lamps from Bulbman (www.bulbman.com).

Aug 08, 2010 | Kodak Office Equipment & Supplies

1 Answer

We have a Kodak Carousel 650A projector. (140 slide carousel) Cannot advance the slides using the remote or the select bar. Putting in the individual slides with the carousel off the select bar will eject...


The purpose of the "SELECT BAR" on a Carousel 650H is to eject the slide. If you press & hold the select bar it allows you to rotate the tray to the slide you want (or Zero & remove the tray). If you can not advance or reverse the slide tray using either the remote buttons or the buttons on the side of the projector, then chances are you have a broken part in the slide change mechanism. The possibilities are numerous, and really requires a trained tech to analyze your specific failure. Sorry the news isn't better (or simpler!).

Jun 20, 2010 | Office Equipment & Supplies

Not finding what you are looking for?

Open Questions:

Office Equipment & Supplies Logo

Related Topics:

41 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kodak Office Equipment & Supplies Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Kodak Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...