Question about Hitachi Televison & Video

Open Question

My Hitachi TV L22D is stuck in analogue.i get analogue menu when I press menu button on remote

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: viewsonic n2751w

why does my 27 inch lcd monitor keep changing colors

Posted on Jan 04, 2008

Ad
ctf1800
  • 4402 Answers

SOURCE: hitachi ultravision digital projection television

First try a hard reset to see if that will unlock it. Unplug the power cord for 1 hour; the power

Posted on Jan 08, 2008

  • 1 Answer

SOURCE: manual tuning of Hitachi cle-942 tv

Select the channel to tune & press "CH" this is the key to the right of zero on the CLE-942 remote, Now you can tune the selected channel. You also need this key to sort/move channels after running auto tune.

Posted on Aug 29, 2009

  • 2 Answers

SOURCE: Ive got a urc-3920 One for all remote . All

i have a goodmans tv GTV69RFDT and i have brought a one for all remote urc-3920-urc 3940. All the codes dont work, i have tried the seach method and still nothing is working properly, i get the number buttons and volume but no up channel and down or menu button. Need help

Dan

Posted on Apr 20, 2011

tonykhprabow
  • 1 Answer

SOURCE: I have a Hitachi it is stuck on stand by. Cant

Hi I have same problem as you but with different brand of tv, now is all good, if you open your back tv see there board connect to your on /off button on tv or find where is on/off button on your tv, try follow where is the wire going to the board,there is 3 cappacitor in mt tv said 470 uf 25 V your tv could be different size. the capacitor doesnt look bulge or bad but i just change it cost me aus $ 2.10.and work straigh away. hopely this help.
regards.

Posted on Jul 26, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi all please help, I have an LG 32ld450 with no remote so I'm using my sky+hd remote. The problem I have is that I've tried to set up a magic eye in my room but I can't get off DTV to get the right...


Your TV has menu buttons on the side. When you go in to the menus then the normal thing is for the Volume and channel keys to act as Up/Down and Left/Right. I can't tell you which will do what function; you'll have to try it, but they should work. The TV also has an OK/Select/Enter button on it so you can activate a sub menu as you navigate through.

From the side menu it should be possible to access the tuning menu. Once in there you can set up the TV's analogue tuner to receive the Sky box RF2 out signal.

As for how you change between the analogue and DTV tuners, that could be a tougher nut to crack. There's a little trick with a Sky remote that allows one to program the Help key to bring up a TV's input menu:

On your Sky remote, press TV
Now hold down Green and Select together until the red LED flashes twice.
Now press the help key
Now press Select

Now, when you press TV and then the Help button the TV should display its input menu. Pressing help repeatedly will cycle through the inputs.

Of course,m the above only really helps if the TV lists the analogue and DTV tuners individually. If it doesn't, and there's now way of accessing it through the TV's menu navigation, then you might have to just bite the bullet and go to a supermarket and buy a cheap universal remote. Check it has the TV/Radio or TV/DTV function before you buy.

Sep 17, 2014 | Televison & Video

Tip

Service menu codes hitachi


I provide this information for those that are qualified and trained to do TV repair work. Entering or making changes in service mode by untrained persons can cause significant and permanent damage to your television. If you are not qualified to service your television, please DO NOT ENTER these service menu codes.

RPTVs :


F59 SERIES

* Press and hold the {MENU} button on the TV.
* Then press the {MENU} {8} {SELECT} buttons on the remote.
* To exit, press the {MENU} button on the TV or
the {EXIT} button on the remote control.

DCAM Mode:

* Using the remote control:
* Hold down the {TV} button.
* Press the {MENU} button.
* Press the {INFO} button.
* Release the {TV} button.
* Remote Control Key Functions When In DCAM Mode:

{INPUT} ............. Blue (13x9 adjust)
{ASPECT} ............ ROM Write
{DAY/NIGHT} ......... ROM Read
{MENU} .............. Remove Color
{EXIT} .............. Cross Hatch/Video Mode
{INFO} .............. Green
{GUIDE} ............. Calculation
{2} ................. Cursor UP
{5} ................. Cursor DOWN
{6} ................. Cursor RIGHT
{4} ................. Cursor LEFT
{0} ................. RED (7x5 Adjust)
{STOP} .............. Initialize
{PLAY} .............. Raster Position
{FAST FORWARD} ...... Phase

To Exit The DCAM Mode:

* Press and hold the {TV} button.
* Press the {0} button.
* Press the {1} button.
* Release the {TV} button.

on Apr 29, 2015 | Hitachi Televison & Video

1 Answer

Changing inputs on hitachi tv 46w500 with out a remote


The Hitachi 46W500 has an Input button on the front of the TV. (This is the second button from the right. The right-most button is the Menu Button.) You should be able to press this repeatedly to switch between inputs.

If the Front Panel Lock is engaged, you need a remote to unlock this. (Only the Power button works when the FPL is engaged.) A universal remote which has a code that matches that needed to get the Menu button to work will do the job.

I hope this helps.

Cindy Wells

Mar 22, 2013 | Hitachi 46W500 46 in. TV/DVD Combo

1 Answer

I just bought a 32bv701b. When doing auto scan no digital channels appear. My previous TV received them all fine. Help!


Do a retune to this TV.

Press MENU button on the remote control and select
Install and Retune by using Left or Right button.
Press OK button and the following menu screen
will be displayed

Select Automatic Channel Scan (Retune) by using
Up or Down button and press OK button. Automatic
Channel Scan options will be displayed. You can select
options by using Up or Down and OK buttons.

Auto Channel Scan Menu Operation
Digital: Searches and stores aerial DVB stations.
Analogue: Searches and stores analogue stations.
Full: Searches and stores both analogue and aerial
DVB stations.

Whenever you select an automatic search type and
press OK button, a confi rmation screen will appear
on the screen. To start installation process, select
Yes, to cancel select No by using Left or Right
and OK button.

After auto channel scan type is set and selected
and confi rmed, installation process will start and
progress bar will move along. Press MENU button
to cancel process. In such a case, located channels
are not stored. The television will start to search for
all available stations. You must allow the television
to complete the search.

Jun 13, 2012 | Panasonic Televison & Video

1 Answer

I cannot retune my samsung tv- model no LE37C53CF1W- COULD YOU ADVISE HOW TO RETUNE, mANY THANKS, Jim Lauder


Hi,Does the icon look like a large satellite dish?
Make sure your TV is on "TV" and not "DTV" before retuning.

To re-tune analogue channels:

I have a Samsung TV and that icon is not accessible from the menu if i am watching the tv on the digital option of my remote. You have to switch your tv to the "tv" option on your remote and you will be able to access the icon from your menu.
(on your remote, you should have a button with TV/DTV on it)

To re-tune analogue channels, if you want to re-tune digital channels, then look for the "D MENU" button on your remote. Press this then scroll down to the icon that looks like a large satellite and then on "Auto Store" This will re-tune your digital channels :0)


Take care and hope it helped.

May 28, 2011 | Televison & Video

2 Answers

I hook my antenna to the back and I'm not receiving a picture


Hi,

I'm assuming your Antenna is connected to your TV with a co-axial cable? If so, please make sure you have run the Analogue/Antenna/Air channel scan correctly:

1. Switch the TV on
2. Press the "MENU" button on the Curtis remote supplied with the TV.
3. Press the RIGHT arrow button five times to highlight the "Channel" menu
4. Press the "ENTER" button or the DOWN arrow once to open the "Channel" menu

The Air/Cable option should be highlighted.

5. Use the LEFT/RIGHT arrow buttons to set the "Air/Cable" option to "Air"
6. Press the DOWN arrow to highlight "Auto Scan"
7. Press the "ENTER" button or the RIGHT arrow once to start the automatic channel scan.

When the scan has finished, the TV should automatically return to viewing mode. If not, just press the "EXIT" or "MENU" button on the remote to close the menu.

You also need to make sure the correct INPUT/SOURCE is selected on the TV:

1. Press the "SOURCE" button on the Curtis remote
2. Use the UP/DOWN arrows to highlight "TV" in the INPUT SOURCE menu
3. Press the "ENTER" button on the remote to select "TV" and close the INPUT SOURCE menu.

This should be all you need to do to watch your TV from an antenna source.

Please post back if you are still unable to get it to work and need further assistance.

Regards,
BElectric





Dec 30, 2010 | Curtis LCD2424A 24 in. LCD HDTV

1 Answer

How do i reset factory sttings on samsung lcd tv


go into analogue tv press menu move down to settings you should be able to enter plug and play in menu press ok( if you can not enter it you are not in analogue )
if not solve problem try this !! warning !!

you will enter the service menu DONT ENTER OR CHANGE ANY OTHER ITEMS THAT ARE DISPLAYED AS TV WILL NOT WORK IF YOU DO

With tv in standby press INFO / MENU / MUTE / STANDBY on remote

then use ONLY DOWN nav-key move to number 12 FACTORY RESET
press RIGHT nav-key will reset all tv settings to factory ones

PRESS STANDBY TO EXIT on remote
you will have to RETUNE after tv after

Oct 25, 2009 | Samsung LN46B530 LCD TV

1 Answer

How do i access the service menu of hitachi television. thanks!!!


F59 SERIES

* Press and hold the {MENU} button on the TV.
* Then press the {MENU} {8} {SELECT} buttons on the remote.
* To exit, press the {MENU} button on the TV or
the {EXIT} button on the remote control.

DCAM Mode:

* Using the remote control:
* Hold down the {TV} button.
* Press the {MENU} button.
* Press the {INFO} button.
* Release the {TV} button.
* Remote Control Key Functions When In DCAM Mode:

{INPUT} ............. Blue (13x9 adjust)
{ASPECT} ............ ROM Write
{DAY/NIGHT} ......... ROM Read
{MENU} .............. Remove Color
{EXIT} .............. Cross Hatch/Video Mode
{INFO} .............. Green
{GUIDE} ............. Calculation
{2} ................. Cursor UP
{5} ................. Cursor DOWN
{6} ................. Cursor RIGHT
{4} ................. Cursor LEFT
{0} ................. RED (7x5 Adjust)
{STOP} .............. Initialize
{PLAY} .............. Raster Position
{FAST FORWARD} ...... Phase

To Exit The DCAM Mode:

* Press and hold the {TV} button.
* Press the {0} button.
* Press the {1} button.
* Release the {TV} button.

Oct 25, 2009 | Beko 142746 TV

2 Answers

Cant work my freeview


The [A/D] button on the remote control switches between analogue and dgitial TV.

If this doesn't work you can restore the TV to factory settings as follows:

Press and hold the [Menu] button on the TV (NOT on the remote)

The picture / sound / features menu will appear.

Continue to hold until this menu clears.

Release the [Menu] button and wait for about 90 seconds.

The TV will go blank and eventually return to the original install menu.

Install the TV as you did from new.


This will clear ALL analogue and digital TV channels and install again from scratch.

This should be used if the TV ever freezes on digital, or if any of the channels appear in the wrong place or not at all.

May 07, 2008 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2337 Answers

The Knight
The Knight

Level 3 Expert

76140 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...