Question about Integra Audio Players & Recorders

1 Answer

My integra av receiver model no DTR-70.1 amplifier displays but no sound what could be the problem?

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    New Friend:

    An expert that has 1 follower.

  • Expert
  • 95 Answers

Http://www.integrahometheater.com/faqs.php Check the connections and try a master reset?
Perform a master reset. To do the reset you need to turn the receiver on, then on the front panel of the receiver press and hold the "VCR/DVR" button while doing that press the "STANDBY/ON" button. You will see the word "Clear" in the display screen and the receiver will go into standby mode.

Posted on Jul 03, 2018

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 119 Answers

SOURCE: no sound from a yamaha AV receiver preouts connected to ext in

Do not use the ext in plug into the aux, or video input of the denon

Posted on Feb 25, 2009

  • 1 Answer

SOURCE: av amplifier

The display problem is because the solderings on the back of the display are broken. To fix it you have to open the amp and redo the solderings (there are about 50 or 60 of them). There is a Youtube video that shows how to do it. I have fixed this on my DSP-A1.
I also have the problem with the motorized volume control. I have tried cleaning it, and it works for a few days, then it's stuck again. I guess I will have to replace it to have it fixed permanently. The part number is VZ621400, a new one costs about 40$.

Posted on Jun 23, 2009

  • 9 Answers

SOURCE: Low to no volume output from Integra DTR-5.2 receiver

most higher end integra's have a input level adjusment or input selection for each and every input. Perhaps you are not on the correct input, go to onscreen programming and check out the input level and input select - also try the tape in another input like tape 2 or cd. It will not hurt the receiver for a test. Also, if you are using the cheap cables from the manufacturer - try a pair of cables that you know work or go by some. BTW, you don't need to spend $40 for cables order them online through amazon or other store. Gold / sliver plated oxygen free are best.

Posted on Jun 30, 2009

dunnbiker
  • 8546 Answers

SOURCE: I have a Integra receiver

NO sound at all? That would be odd as its internal FM receiver is independent of any user connections. I'd work on getting FM to work first, then move on to more complex issues.

The manual is here:

http://www.retrevo.com/support/Integra-DTR-6.6-Receivers-manual/id/550ag000/t/2/


To reset the AV receiver to its factory defaults, turn it on and, while holding down the [Video 1] button, press the [Standby/On] button. "Clear" will appear on the display and the AV receiver will enter Standby mode.

Posted on Dec 26, 2010

AJIN G
  • 6694 Answers

SOURCE: my integra dtr 5.6 receiver

hi,
As you have mensioned it should be power supply problem. You have to check the voltage regulators at it power supply satge. it should need a good electronics servicing skill to find out the exact problem. if you are not experienced in it, then i will prefer you to consult some one more experience in it for such a costly system.
ok

Posted on Jul 30, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an Integra DTR 20.3. Recently, I have been getting no sound from the speakers after removing the headphones from the headphone jack. Any ideas?


Usually the headphone jack has a contact that's "made" by the 'ring' section of the jack when you push in the plug, which bypasses the speaker circuit (that's what automatically silences the speakers when you plug in the headphones when there are no switches to turn the speakers on/off manually)... if the 'ring' strip got bent somehow so it's pressing against that contact all the time, it won't let the speakers' circuit come out of bypass. Look inside the jack with a flashlight... the sideways Vs that touch the 'ring' sections of the stereo headphone plug should be about in the middle of the opening... if they're pushed over too far it may require disassembly to bend them back to the proper position.

Mar 08, 2015 | Integra Dtr-20.3 THX Select2 Plus AV...

1 Answer

I am not getting any audio (sound) out of my Integra DTR 4.6. Any suggestions?


Does the vu meter show anything(bars moving up and down when audio is present?If so you may have a blown fuse or bad IC in the amplifier section causing the problem. If there is no indication of audio on the front panel it would be a Microprocessor problem

Oct 15, 2014 | RCA Onkyo Integra Dtr-4.6 Av Receiver Wrat

2 Answers

How to fix Integra 7.8 display is dead


They will be value of 10 ohms or less in the secondary power supply attached to the front assembly

Jul 20, 2014 | Integra Dtr-7.8 Receiver

1 Answer

Sounds stop working


You will have a defective processor pcb.

Mar 04, 2014 | Integra Dtr-20.3 THX Select2 Plus AV...

1 Answer

Integra DTR-5.6, no sound for am/fm tuner


reset receiver if that does not work You will have a defective processor pcb

Aug 24, 2013 | Integra DTR 5.6 Multi Media Amp

1 Answer

How do I set up an Integra DTR 7.8 for 3D display and audio


Your DTR-7.8 receiver is not 3D compatible. It does not support the new 1.4 HDMI. You have to have 1.4 HDMI and 1.4 cables for the 3D format.

You can bypass your receiver for the video though. Simply run your HDMI cord (1.4) from your Blue Ray to your Projector. Your audio can be ran from your Blue ray to your reciever.

May 17, 2012 | Integra Audio Players & Recorders

1 Answer

I have a Integra receiver model number DTR 66 and I have no sound. it appears to have everything connected and should be working. I would like to know how to reset the receiver or what steps do I need to...


NO sound at all? That would be odd as its internal FM receiver is independent of any user connections. I'd work on getting FM to work first, then move on to more complex issues.

The manual is here:

http://www.retrevo.com/support/Integra-DTR-6.6-Receivers-manual/id/550ag000/t/2/


To reset the AV receiver to its factory defaults, turn it on and, while holding down the [Video 1] button, press the [Standby/On] button. "Clear" will appear on the display and the AV receiver will enter Standby mode.

Dec 26, 2010 | Audio Players & Recorders

2 Answers

Power tripped out cannot access video sores when trying toaccess video 1 i am getting dvd sourse


http://www.retrevo.com/support/Integra-DTR-7.2-Receivers-manual/id/550ag003/t/2/
filedepot.onkyousa.com/Files/own_manuals/ADM-2.1.pdf
Below,is the support website for your convince. www.integrahometheater.com/model.cfm?m=DTR-7.1...
I have seen this type of things a few times before in my shop, What has unfortunately happened is that when the power went Off/came back On, it has "Spiked" the Computer Controlling circuitry internally.
Sometimes, if possible, one may be able to "Reset' the unit. But, usually, serious damage has been done. I have given you a link to a manual so you can check.

Jul 20, 2010 | Integra DTR-7.1 Receiver

1 Answer

No sound from speakers from components with Integra 6.9 receiver


Turns out it had to do with one of the settings for the new Blu-Ray player.
Thanks anyway.

Jan 17, 2009 | Integra DTR-9.1 7.1 Channels Receiver

Not finding what you are looking for?
Audio Players & Recorders Logo

Related Topics:

996 people viewed this question

Ask a Question

Usually answered in minutes!

Top Integra Audio Players & Recorders Experts

 Grubhead
Grubhead

Level 3 Expert

5699 Answers

The Knight
The Knight

Level 3 Expert

76140 Answers

Marvin
Marvin

Level 3 Expert

85178 Answers

Are you an Integra Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...