Question about Husqvarna Sewing Machines
This problem for your machine can either be a faulty touchscreen or was not installed into your machine properly, you can contact firstname.lastname@example.org
Posted on Jun 30, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Are you kidding me.....I can pay to be on your plan and you may suggest a solution.
But I can tell you how I fixed the problem for free??
I'll let you know for $19.95!!!
Posted on May 15, 2009
I have this problem with my Viking Lily sewing machine, only when the humidity is fairly high, otherwise it always works perfectly. I don't know why this happens.
Posted on Jul 30, 2009
SOURCE: The touch screen will not
Hi, this is a common problem to any touch screen. Touch screens has lesser life than the machine. You screen has gone bad, and you may have to replace it. There is no troubleshooting guide. And there is nothing wrong with your machine. Just that the touch screen has gotten old and not working.
Posted on Dec 21, 2010
Touch screen on a Designer 1 may not be responding due to a number or reasons. Here are some possibilities:
1. A Designer 1 screen will 'go to sleep' when not used. The length of time of 'no use' is set in the preferences. Shut off the machine and see if screen is active.
2. The 'sleep mode' may have been accidentally reset by going into the 'technical menu'. Technical menu can only be accessed by depressing a number of buttons in a specific sequence which is not revealed to consumers, but if you were 'playing' around with buttons, the technical menu may have been accessed and changed the 'no use' time or 'dormant' setting. Go to your dealer, or a reputable Husqvarna Viking dealer, who will be able to check this out on the spot (if they are really a qualified dealership).
3. Mechanically a number of factors may have caused the black screen, if neither of the above are the solution. These can be: disconnected screen cable, circuit board malfunction, or as you are suspecting ... a cracked screen. If you can see a 'scratch' like mark on the screen, it is most likely the cause of your problems. Yes, all of these are fixable by a qualified technician.
Posted on Apr 21, 2014
Tips for a great answer:
Nov 18, 2016 | Husqvarna Sewing Machines
Feb 11, 2015 | Husqvarna Viking 1
Oct 13, 2014 | Husqvarna Sewing Machines
Apr 20, 2014 | Husqvarna Sewing Machines
Sep 14, 2017 | Husqvarna Sewing Machines
Nov 25, 2010 | Husqvarna Designer I
Nov 24, 2010 | Husqvarna Designer I
Nov 19, 2010 | Husqvarna Designer I
Aug 22, 2008 | Husqvarna Designer I
Dec 18, 2007 | Husqvarna Viking 1
69 people viewed this question
Usually answered in minutes!