Question about Hitachi Televison & Video

1 Answer

Where is the reset button on the Hitachi plasma

I get no sync/signal on my tv and it doesn't have a reset button

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Hitachi Master
  • 76,140 Answers

There is no sych special button with modern TVs. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the sites linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/ http://homenol.blogspot.com/ http://electro-medical.blogspot.com//

Posted on Aug 04, 2018

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
bluegreenash
  • 661 Answers

SOURCE: No Display

for the HD15 connection you need to set your TV to PC mode

 

the only thing I can think that you may be doing wrong is that you need to "ACTIVATE" the external outputs on the laptop,as they are not on by default.

 

To switch video output mode  LCD / CRT (monitor/PC mode) /TV mode plus some dual modes LCD + CRT / LCD + TV

 

I have found that the overlays used for video playback do not work in the dual modes,  (and I have found that CRT monitor mode is best for connecting to a large TV)

 

so switch your TV to PC input,  connect your HD15 cable and SWITCH output mode on your laptop (usually Fn F5) press until you get an output,

 

you will also need to connect audio, so get a phono -> 3.5mm jack plug and plug that in also, and you are ready to rock and roll

Posted on Oct 11, 2007

tvhelp-Dave
  • 178 Answers

SOURCE: my Hitachi 1080, 42 inch plasma Tv purchased in

The Main digital board has problem, part# UX28023 (for P42H401, not P42H401A) , approx $170.

Posted on Apr 25, 2010

  • 9 Answers

SOURCE: When I turn my hitachi flat screen tv on,

you are not getting a signal change soure ie box or dvd player and input jack then try

Posted on Aug 20, 2010

  • 144 Answers

SOURCE: 37" hitachi plasma tv doesnt turn on

If you have a light on ( standby light ), then I would say power supply fault, tv could be shut down because of faulty capacitors in power supply. if you dont have any lights at all , check fuse in plug,
( there will almost certainly be a fuse in the tv) but, that is for a tv guy to fix.
pete

Posted on Nov 10, 2010

bugoy31
  • 1238 Answers

SOURCE: i have a Hitachi hi

Good day!!!! Please get the remote and press the menu button after that select and choose the default or factory settings then enter.... After that power off all devices(set top box,dvd,TV) and wait atleast 5 minutes then power it ON again... And see what happen... Thanks for using fixya...

Posted on Sep 19, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have hitachi plasma 42 HDS 69 tv it's shows " No sync signal" so how to fix that at home?


Hiya!
If I understand your question, it seems that you'll need to go into the TVs 'input selection' part of the menu and try another input until you get a signal
Please let me know how it goes

Nov 20, 2016 | Hitachi Televison & Video

3 Answers

I have had a Hitachi 42" Plasma screen TV for almost 3 years and recently it has had problems. When you turn it on, the TV only stays on for about 10 minutes, and then the screen goes black with the...


The signal from the STU to the Hitachi box is going in the wrong direction.
Is the adaptor that you have switchable? If so, flick the switch in the
other direction and this will fix it. If the adaptor is not switchable get
one that is. Then set the STU output to RGB.

Hope this Helps. -CA

Jul 14, 2008 | Televison & Video

1 Answer

Everything in system works except video on DVD player, get message no sync signal


Usually when to devices like this won't sync is when they are not compatible on the resolution side.(ex. dvd can display 720 p and the tv cannot do anything below 1080 p. I would say that unless you have a new commercial plasma it is the opposite problem. The DVD won't go backwards to match the TV. Check that the DVD Works on another set and vice versa and repost what you find out.

Nov 17, 2013 | Hitachi P50H401 50 in. Plasma HDTV

1 Answer

I have a hitachi 50 "plasma that was given to me


First do you see a light indicating that the TV has power? There are two power buttons on the TV (the main power and the regular power button). The red standby light will light up when the main power switch is on. This indicator is just to the left of the remote I/R sensor. You can find the main switch on the bottom front of the tv (it is under the tv forward of the stand). Turn on the Main power if it is not on. Then try the power button on the control panel of the TV again.

Does the standby light change color or blink? (Red is standby, orange is power savings (no signal), blue is on.) If the main switch is on and the standby light doesn't come on, the TV has a problem at the power supply. Try unplugging the unit for a bit (at least 30 seconds) and then plugging it back in. This will reset the internal circuitry. If you see a blinking light, then the TV is reporting a self-test failure. I do not know the codes for this model Hitachi Plasma TV.

The manual for the Hitachi P50H401 TV is available from Retrevo: http://www.retrevo.com/support/Hitachi-P50H401-TVs-manual/id/1233ci869/t/2/ . You will need to enter a code to access the pdf.

I'm assuming you don't have one of the special versions that were intended for large audiences that were only controlled by remote (no control keys on the front of the TV). Remotes.com has the original remote or a substitute remote if you need it. See http://www.remotes.com/remotes/servlet/rs?a=gmi&uuid=13104063628240&smodel=P50H401&brand_pn=HITACHI_P50H401 .

I hope this helps.

Cindy Wells

Jul 11, 2011 | Hitachi P50H401 50 in. Plasma HDTV

1 Answer

Hitachi 42" ultravision...power light on, hear


Tries pushes the power switch on the remote few times,each times push wait like a 1 mins or 2 mins for the tv Tuner signal board to take it effect.This process should get ur tv picture back,because the tv Tuner signal board it is old and having problems,evenually require replacement of a refurbish tv Tuner signal board.Tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish tv Tuner signal board for the replacement.

May 23, 2011 | Hitachi UltraVision 42HDS52 42 in....

1 Answer

No sync signal


I'm watching live TV or recorded TV and it flashes up with a black screen saying "no sync signal".......turn TV off and then on and its all ok??????? anyone?????

May 04, 2011 | Hitachi 55HDT79 55 in. Plasma HDTV

2 Answers

No sync no signal


Tries tv and those pay boxes unplug,replug it back like about an hour later.By letting the tv resetting itself back to the factory setting.Those pay boxes,now will be rebooting and upgrading it softwares.The incomming broadcasting signal sync problems should be solved,if still have no sync signal flashing,than 90-95% those pay boxes have a problems.Call ur cables providers exchange the reciever box.

Mar 01, 2011 | Hitachi P50H401 50 in. Plasma HDTV

1 Answer

When I turn my hitachi flat screen tv on,


you are not getting a signal change soure ie box or dvd player and input jack then try

Jul 26, 2010 | Hitachi 32HDT20 32 in. Plasma Television

4 Answers

No hdmi signal


hold down your playstation button for a few moments and it will automatically sync to the tv at optimal settings. And thatz wut it doobi

Nov 20, 2007 | Hitachi 42HDS69 42 in. Plasma Television

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

218 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2337 Answers

The Knight
The Knight

Level 3 Expert

76140 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...