Question about Hitachi Televison & Video

Open Question

My Hitachi 57F710E rear projection tv won't turn on after power failure.

I have a Hitachi 57F710E rear projection tv that won't turn on. We recently had a power failure, the electric went off and on, off and on, and then off and stayed off. This happened in quick succession. After the power was restored the tv wouldn't turn on. I took the back off of the tv and checked to see if there were any fuses that might have blown. There was 4 fuses, 3 on the power supply board and one on another larger board that I believe says "deflector" on it. All the fuses were fine. We did the unplug and plug in thing like the book suggested and it didn't work, we even left it unplugged for 72 hours and plugged it back in, it didn't work. So, we decided to just move it out to the garage to get it out of the way. After we moved it out there I decided I would take the back off and take one more look at it. after I took the back off I plugged it in and I heard a slight click, it only clicked once. I also noticed that there was a small green LED light on the deflector board that was lit up, so I pushed the power button on the front of the tv and I heard the tv come on. I went ahead and hooked a dvd player up and lo and behold the tv was working fine. At that point I decided to go ahead and clean all of the optics. I then brought it back into the house and hooked all the STB's back up and plugged it in. The tv wouldn't turn on. It no longer makes that small click noise when I plug it in and the little LED light on the deflector board no longer lights up. Could someone give me an idea of what could be wrong. Thanks

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 68 Answers

SOURCE: f32650/atc113ca1

This could cause a problem, because modern TVs and most other entertainment electronic goods, have a small kind of computer chip, but there should be a Reset button probably inside the set! If you feel confident about computer chips you may be able to find the button by tracing the circuit.(Disconnected from the mains). Another idea is if there is a small button cell or battery inside, then try disconnecting it for a day. Good Luck!

Posted on Dec 02, 2006

Ad
ctf1800
  • 4402 Answers

SOURCE: Flashing Green Light on Front of 73" Projection TV

on the signal board replace the caps by the 5/9 volt regulators. c2p04 is the main culprit. 6 caps in total can be changed. I believe c2p05 also.

Posted on Dec 15, 2007

  • 1 Answer

SOURCE: Power problem

OMG!! I had the exact same problem! I unplugged the TV to paint and it stopped working with a flashing green button. I ran my fingers along the bottom of the screen and it actually worked.. wow THANKS A TON!!!

Posted on Jul 06, 2008

  • 35 Answers

SOURCE: NO PICTURE, NO SOUND On My Plasma TV.

Should have been 3300 UF 10V caps that were bad? Shouls have been replaced with 3300UF 18V. 50V is huge. If it was replaced with a 50 the polarity may be wrong or the cap it too big to be seated property. Sometimes the caps just dry out and even a normal looking one will be the culprit of no OSD. Are you getting an LED fault code blinking? That should be a red led. Do you hear the relay clicking.? When you replaced the caps did you charge them? Just plugging in the set without trying to power it on for about 20-30 mins. I may be able to help you

gysgt2u1@yahoo

Posted on May 08, 2009

SOURCE: Philips 42PF5320 plasma - unplugged and plugged in. wont turn on

This is a common problem on these plasma TV's. The problemresides in the high voltage boards known as the X and Y Sustainboards.. You can purchase them here for a very reasonable price:
http://www.discount-merchant.com/Y-SUSTAIN-FOR-42-PLASMA-TV-PN-6871QYH036A-p/sku9510.htm

The above link is to a Y-SUS board. The X-Sus board is often the 2nd cause of failure and can be found here:
http://www.discount-merchant.com/X-SUSTAIN-6871QZH041B-6870QZE017D-6871QZH052D-p/sku9509.htm

Totest which board is failing, you need to check voltage input to theYSUS board first... Input should be 120V from Power supply, outputshould be above 250V.. Do this test with XSUS disconnected. IF 250+Vexists, then XSUS is damaged. If not, then the YSUS is the faulty part.

Posted on Oct 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hitachi TV 51 "


Tv is not turning on....you can hear it click....model # 51zx24k Hitachi...

Jun 19, 2011 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

I have a 1992 hitachi rear projection model #46ux12bc and the TV clicks when i hit the power button but it won`t turn on.I checked the power supply and cord.


Replace both of your STK ICs STK392-110s use 120s or 150s
Mats Electronics has them 1-800-628-1118
They are Big Black ICs will have PN# on them.

Sep 28, 2010 | Hitachi 46UX24B/25K 46" Rear Projection...

1 Answer

My tv clicks like it's turning on but the blue light doesn't flash and it just wont turn on, it still makes the clicking noise though. 56 inch I think.


My Hitachi 57S715 did the same thing recently. I've been told that it is probably a problem with the power supply. Did you ever get a definitive answer to the problem?

Aug 09, 2010 | Hitachi 57S715 57" Rear Projection HDTV

1 Answer

I have a 1994 50ex8k hitachi rear projection tv that wont turn on


it has a built in safety. there's a problem with tv board

May 31, 2010 | Hitachi Televison & Video

2 Answers

Hitachi tv no picture or sound.


my hitachi projection tv 53uwx10b screen is black with no sound or picture when the power button is on

Dec 29, 2009 | Hitachi 53UWX10B 53" Rear Projection...

1 Answer

Hitachi 50UX58K-V8F001238


our hitachi did the same thing. It cost us 300.00 to tell us that there were two bad solder joints and they caused a power surge or something.

Apr 17, 2008 | Hitachi 50UX58K 50" Rear Projection...

1 Answer

Hitachi rear projection 60" tv, power failure


Yes,it's worth it ! Check for bad C702 capacitor next to HV
transformer covered partially by glue and E994 open pico fuse
in power supply .part # for cap 1-161-754-00 102K / 3KV.......T.

Dec 04, 2007 | Hitachi FDX Series 43FDX10B 43" Rear...

1 Answer

Problem with a Hitachi model number 57F710E Model....


sounds like a bad convergance chip/board. But with it working ok on the DVD it may be a tuner problem. If the DVD is hooked in the video plug, you may way to run your channeling from the DVD and foget the tuner on the TV. Good Luck
Ed
NC Electronic
Mills, Wyoming

Nov 12, 2007 | Hitachi 57F500 57" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

221 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2337 Answers

The Knight
The Knight

Level 3 Expert

76140 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...