Question about Hitachi Televison & Video

Open Question

Why is Hitachi nana tatanium timer cursor blinks 13 times?

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Timer blinking


Turning the record timer on/off
  1. 1 Press TIMER/CLOCK ADJ.
  2. 2 Use the <> (cursor left/right)
buttons to select REC.
On the front panel use '<<>> and <<>>'
  1. 3 Press ENTER.
  2. 4 Use the <>(cursor left/right)
buttons to select ON or OFF.
On the front panel use '<<>> and <<>>'
5Press ENTER.

Apr 20, 2014 | Pioneer XVDV830/SDV830 DVD AUDIO HTP...

2 Answers

Replaced main bulb in front but lamp button on front of tv is still blinking and tv won't show picture


The lamp timer on the Hitachi projector must be reset whenever the lamp has been replaced. The "Lamp" indicator on the display will light red or the "Change the Lamp" message will display when the lamp timer needs to be reset. Hitachi recommends that the lamp timer never be reset without replacing the lamp and to always reset the timer when the lamp is replaced. The message functions of the projector will not function properly if the lamp timer is not correctly reset.

  • Turn the power on. Press the "Reset" button for three seconds until the "Lamp xxxx hr" message appears on the lamp timer on the bottom of the screen.

  • 2

    Press the "Menu" button on the remote control while the lamp timer is displayed.

  • 3

    Press the left arrow button. Select "0" and wait until the timer display clears.


  • If this was helpful a vote on the thumbs up for the free advoce would be greatly appreciated. Thanks

    Apr 04, 2011 | Hitachi 60V500 60" Rear Projection...

    1 Answer

    Programing


    You posted under Leviton 6124 programmable timer.
    If this is not your timer, add a comment
    Leviton 6124 manual:
    http://waterheatertimer.org/images/6124-manual.pdf

    If you have different timer, look at link below to help identify timer.
    Leviton Timers:
    http://waterheatertimer.org/Leviton-timers.html

    Leviton 6124 timer instructions:
    Timer comes with plastic protector over display >> remove protector to see display.
    Large button is manual override.
    After timer is wired, push override to make sure Load turns ON and OFF.

    Timer has 3 small buttons located below manual override used for programming
    Display is divided into 24-hours with am times on left and pm on right.
    24 Hour day is divided into 1/2 Hour segments
    Each 1/2 hour must be set for ON or OFF

    Start by pushing left-side event-cursor-advance-button and it scrolls down each 1/2 Hour.
    Once you arrive at 1/2 hour > make decision if you want timer ON or OFF for that half hour.

    Press event-set-reset-button in center to set ON-OFF for that 1/2 hour.

    Press center event-set-reset-button and solid black rectangle fills in for that half hour.
    Solid black rectangle means timer ON for that 1/2 Hour.

    Once solid square is selected, press event-cursor-advance-button and cursor advances again and starts filling in black rectangles for each 1/2 Hour period.
    Keep filling in black rectangles for all times you want timer ON.

    When you reach 1/2 Hour period you want timer OFF, then press center event-set-reset-button so that no black rectangle is visible for that 1/2 hour.
    No black rectangle means timer is OFF for that half hour.

    To set current time, use right-side time-advance-button.
    Press and hold time-advance and time cursor advances down through the am and then pm hours.
    Stop cursor at current time, and timer is ready.

    geno_3245_131.jpg

    Dec 02, 2010 | Leviton 6124H-A 6124H-A Decora LCD Timer...

    2 Answers

    Hitachi 55vs69A TV TEMP and LAMP red lights blinking. Can I solve this problem myself or do I need a TV repairman?


    If you replace the lamp and reset the lamp timer then that will do it.
    For resetting of the timer, see instructions within the lamp box.
    Hope that helps.

    Nov 13, 2010 | Hitachi 55VS69 55" Projection HDTV

    1 Answer

    Google chrome and facebook


    sounds like a virus/malware, scan for both

    Jul 18, 2010 | Google Chrome

    1 Answer

    Decora 6124H Timer


    Leviton 6124 timer instructions:
    Timer comes with plastic protector over display >> remove protector to see display.
    Large button is manual override.
    After timer is wired, push override to make sure Load turns ON and OFF.

    Timer has 3 small buttons located below manual override used for programming
    Display is divided into 24-hours with am times on left and pm on right.
    24 Hour day is divided into 1/2 Hour segments
    Each 1/2 hour must be set for ON or OFF

    Start by pushing left-side event-cursor-advance-button and it scrolls down each 1/2 Hour.
    Once you arrive at 1/2 hour > make decision if you want timer ON or OFF for that half hour.

    Press event-set-reset-button in center to set ON-OFF for that 1/2 hour.

    Press center event-set-reset-button and solid black rectangle fills in for that half hour.
    Solid black rectangle means timer ON for that 1/2 Hour.

    Once solid square is selected, press event-cursor-advance-button and cursor advances again and starts filling in black rectangles for each 1/2 Hour period.
    Keep filling in black rectangles for all times you want timer ON.

    When you reach 1/2 Hour period you want timer OFF, then press center event-set-reset-button so that no black rectangle is visible for that 1/2 hour.
    No black rectangle means timer is OFF for that half hour.

    To set current time, use right-side time-advance-button.
    Press and hold time-advance and time cursor advances down through the am and then pm hours.
    Stop cursor at current time, and timer is ready.

    Jan 04, 2010 | Leviton 6124H 24 Hour LCD Programmable...

    1 Answer

    Need instructions for Ingraham model TE109


    To set the timer press the right arrow key.
    The timer will now be blinking 1on.
    This means on time for program 1.
    Press set.
    The days of the week will be blinking now.
    Use the arrow keys to scroll through the options, like
    just one day of week, every other day ETC..
    Press set when you get what you want on the days.
    Now the hours will be blinking.
    They start at 12:00 AM, so to go to 1:00 PM you would have to
    press the arrow key 13 times.
    When you get the correct hour, press set.
    Now the minutes will be blinking.
    Choose the minutes you want with the arrow keys and press set.
    You will be back to 1on blinking.
    Now press the right arrow key to go to program 1 off.
    Set the off time the same way you set the on time.
    After setting the off time, or any time 1off is blinking, by pressing the right arrow key you will go to 2on and so on.
    You can scroll through all the programs by continuing to press the right arrow key.
    Both arrow keys work i.e. you can go backwards if you went too far.
    You can go to program 20 off if you press the left arrow key.
    Keep pressing the left or right arrow keys to skip to the program
    you want to change.
    When you get to the program you want to change, press set

    Mar 27, 2009 | Solar Ingraham 20 Program Electronic Timer...

    2 Answers

    Cleaning the filter/blinking LAMP and TEMP


    Goto Advanced menu and select option then lamp Time hold down the reset button on the unit for 3 seconds until a new screen comes up then hit reset. Do the same for resetting the filter time

    Feb 01, 2009 | Hitachi CP-X445 Multimedia Projector

    1 Answer

    Sony KV-27S42 no sound and audio blinks four times


    +13 & -13 requires for Vertical Deflection IC and produced by Flyback Transformer, these volts will be produced IF Horizontal deflection circuit works properly. so try to check H-Out Transistor and its necessary volts / signal. Pls also mention correct Model Number to provide you more help.

    Aug 13, 2008 | Sony FD Trinitron WEGA KV-27FS120 27" TV

    7 Answers

    Resetting the air filter timer


    Hiya there, just worked out how to reset the filter timer so for those that need to know here's the solution;
    Bring up the menu and go right the way down to "Option" where it shows you the lamp and filter hours.
    Next highlight/select the filter timer section and while its on there hold the RESET button on the remote for 5 seconds.. this then pops up with a resert option and hey, 0h again, good as new! :-)
    Oh and if you dont have a remote, just hold the right arrow button instead for 5 seconds in place of the reset and follow instructions as above!
    Hope this helps.
    Regards,
    Omar.

    Dec 12, 2007 | Hitachi Office Equipment & Supplies

    Not finding what you are looking for?
    Televison & Video Logo

    Related Topics:

    27 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Hitachi Televison & Video Experts

    Jaime Hernandez

    Level 3 Expert

    2337 Answers

    The Knight
    The Knight

    Level 3 Expert

    76140 Answers

    Steve Allison
    Steve Allison

    Level 3 Expert

    5569 Answers

    Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...