Question about Hitachi Televison & Video

Open Question

I have hItachi model numberLe55w806 flat screen edge-lit I would like to know what is the order of the diffusers inside,thank

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
SD Tech
  • 14553 Answers

SOURCE: how do i clean the inside of my 57

without knowing the model number; some you can remove the rear cover and gain access with a swiffer type duster and clean the webs out(also clean the lens at the same time) Others: the only easy way is to remove the screen--not real easy if you have never done it before---most outside service techs will be happy to come to your home and clean the webs out; also clean the lens and the mirror.

Posted on Aug 07, 2009

Ad
  • 1 Answer

SOURCE: where do I plug in the cable to the hitachi flat

I never got a response from you. Your service is worthless.

Posted on Jan 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The light diffuser cover is broken. The model number of the range hood is HO60488. The range hood dates back to possibly the late 1950's when the house was built.


When faced with the total unavailability of replacement parts, its time to get creative, and make your own diffuser cover. Flat ones
can be easily made - find anything plastic that's semi-translucent (like a plastic milk bottle), and cut it with a utility knife.
I have also used a utility knife to cut a polystyrene diffuser cover
originally intended for a 2-ft x 4-ft suspended ceiling fluorescent light fixture.
In case the diffuser cover you make wants to burn when placed close to a light bulb, replace the bulb with a CFL (compact fluorescent) bulb, which run MUCH cooler than incandescent light bulbs.
Old lampshades can be cut and used, but may need to be ironed flat. The major advantage of lampshade material is that
it can be folded over at the edge once or twice, which will fill space - and possibly hold the cover where a plastic sheet might be too loose.
You'll know that your efforts have met with success when you can easily remove your ne diffuser cover to replace the light bulb.

Feb 20, 2011 | Venmar Kitchen Ranges

1 Answer

HP laptop monitor for dv7-1170us does not work


It sounds like your flat vga cable has pulled loose inside the panel. Just take the lid apart on your screen assembly and press that flat ribbon cable back in and tape it in place.

Mar 09, 2010 | HP Computers & Internet

1 Answer

Hitachi 55PD9700 sound no picture


upper y scan board had a blown chip. removed board and lower screen lit up. ordered a new upper y scan board.problem solved.

May 16, 2009 | Sylvania Televison & Video

2 Answers

Hitachi Plasma EDTV has green dots flickering all over screen


that is called diffusion. that can be adjusted out in most cases by adjusting the y sustain pcb but can also be the main pcb, the logic pcb and panel itself but not likely.

Jan 11, 2009 | Hitachi 55HDS69 55 in. Plasma Television

2 Answers

Vertical black bar down the middle of hitachi plasma tv


Ok if your hitachi TV dies with no power anywhere try this:
Some models have a kill switch under the bottom edge. It's like a gray switch like a small light switch press it back in and voila let there be LIGHT. Saves you at least a $200 trip to repair shop!!

Jan 05, 2009 | Televison & Video

1 Answer

I want to change the light bulb on my hoover elite 600 upright vaccum. How easy is it to do and where do I start? Thanks! Brian


It should be fairly easy.

You will need a flat-edged screwdriver to pry up the white/opaque plastic diffuser that covers the light - the bulb is in a socket underneath it.

Pry up an edge of the diffuser with the screwdriver and you should be able to see that it's held on with 4 tabs - two on the top and two on the bottom. Push the tabs in on either the top or bottom and the cover should pop out easily.

Jul 19, 2008 | Hoover Vacuums

1 Answer

Dell 17' Flat screen


I used to fix a 19 inches LCD flat screen from Dell. There are 4 screws at the back of rear panel and no screw at the front frame. If there is no visible screw, you have to look for "capped" screw holes (little covers that fit flush with the case to hide the screws). If you don't see these neither, this must be a tension fit case. So, face the screen up and look for "rectangular hole" on the side edge (usually at the bottom edge of the screen). This will be a challenge to open without breaking it. You'll need a very thin flat screw driver and wedge it into that narrow rectangular hole. You can use any prybar if you don't have screw driver. It is not too deep. You may stab something important inside and pry it. Once it starts to spread, start sliding it along the seem and you should feel the tension tabs start "popping" open. Continue to work your way around until it's off. Hope this will help you to get the rear panel off. If there is anything I can help you with, feel free to let me know.
Thank you,

Sep 12, 2007 | Rosewill R900J 19" Flat Panel LCD Monitor

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

Jaime Hernandez

Level 3 Expert

2337 Answers

The Knight
The Knight

Level 3 Expert

76140 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...