Question about Midland Radio Communications

Open Question

Hi I have a midland 38 and the wires have snapped in the mike plug. Can you tell me what colour wire goes to each pin in the plug so i can resolder them in please

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: Wiring colour code

Please call 1-877-392-7247

Posted on Jan 07, 2008

Ad

SOURCE: Wiring diagram for Altec Lansing Vs4221 Right Speaker Wire

red-positive . blue-negative and if another colour mostly brown-Earth.

Posted on Jan 17, 2008

SOURCE: wire a vga cable in backin

in vga connector their are 15 pins .u have to solve this problem u have a digital meter to cheack contunity of the pins. if there is old wire is connected on crt board .first u cheack 0 omhs continutey to 1 pin to 15th pin. then u sold ur new cable

Posted on Mar 05, 2008

Communicomm
  • 90 Answers

SOURCE: wiring a midland 78/999 cb radio microphone

Pin 1 = white
Pin 2 = shield
Pin 3 = black
Pin 4 = red

Posted on Sep 29, 2008

  • 367 Answers

SOURCE: kia optima 2004 transmission selector wiring colour diagram

Try this website www.kiatechinfo.com

This will be far more usefull than me just handing you the diagram

Posted on Jan 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you get the cover of midland 100m mike plug...


you may have to get another plug and rewire it the same way as the one you are trying to replace. You will need a pair of wire cutters to cut the plug wire then replace it with the new one the same exact way.

Feb 07, 2016 | Midland Radio Communications

1 Answer

How to wire a road king 56 to a midland powe max cb radio four pin plug


one wire is ground,one wire is tx one wire is rx,so now all you have to do is find which wire goes where. do you have a multi meter? put one end into the antenna plug on the radio now put you meter on sound for an ohms reading and touch the pins .If the pin makes a loud clear sound thats your ground now the rest is trial and error. When you finally get it connected write down the wiring so you can have it at a future date.

Sep 30, 2012 | Midland 77-250CXL 40-Channels Base CB...

2 Answers

I have a Midland CB Car with no mike or a car power pluge, the model # is 70 - 336B and the serial # is 760408


Your midland CB will use a standard 4 pin wired CB plug which is most common for most mics sold today. Your power cord will be a standard 3 pin CB power cord which again is most common with CB's today. You need not purchase a "radio specific" cord or mic. Cobra, Uniden, Midland all the same mic pin out and power cords. Good luck.

Feb 09, 2011 | Radio Communications

1 Answer

The cable has been cut off of my acer monitor (v771-m) I took the back off the monitor and want to fit another cable from a different make, can someone tell me which colour wires go to which pin on the...


Have you already removed the wire from the back of the monitor or have you already replaced the wire and now want to reconnect the 15 pin D-type plug?

If its just the D-type you want to reconnect then have a look here:

http://www.monitorworld.com/faq_pages/q17_page.html

Its not the easiest diagram to follow but all you need to remember is that some wires are used and some are not.

If you dont have a particular colour of wire then it probably isnt used.

I hope that helps...

Cheers

Mike

May 12, 2009 | Acer Value V771 (White) 17 in.CRT...

1 Answer

I want to know how to convert my superstar121


3 Bands (LOW - MID - HIGH) 25.515 - 27.855 MHz.
st121_freq_cov.gif

Export Frequency Conversion
1. Remove the top cover from the unit and locate the PLL chip (MC145106P). Unsolder the short jumper wire running from the +8.2vdc source to pin 9 of the PLL chip. 2. 2. Resolder the three pins of the PLL chip, Pins 10, 11, and 12, being carefull not to short them together. Note: The Super Star 140 Microphone wiring is the same as all Midland Radios.

Mar 12, 2009 | Superstar SS-121 120-Channels Base CB...

1 Answer

Wiring a midland 78/999 cb radio microphone


Pin 1 = white
Pin 2 = shield
Pin 3 = black
Pin 4 = red

Sep 27, 2008 | Midland 1001Z 40-Channels Base CB Radio

1 Answer

Roger bleep kit


throw that annoying noise maker away

Jul 07, 2008 | Midland 1001Z 40-Channels Base CB Radio

1 Answer

Wires snapped


HI,
Sure They Can. just ensure Red To + Positive. And Black To Negative. Or If Colours are Different determine which is + Positive.
these can be resoldered on, using a standard 15-25 watt soldering iron.

Mike @ compurepair.

May 10, 2008 | Kicker S10L52 Car Speaker

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Midland Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1655 Answers

Gene Pitts

Level 2 Expert

159 Answers

Brad Brown

Level 3 Expert

18108 Answers

Are you a Midland Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...