Question about Connex Radio Communications

1 Answer

When turn radio on channel indicator searches but will not stop search 3400 connex 3400

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Genius:

    An expert who has answered 1,000 questions.

  • Connex Master
  • 1,847 Answers

The radio is searching for a strong incoming signal and until it gets one it will search for one. Try turning off the scan button .

Posted on Oct 03, 2018

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
Mechanic688
  • 204 Answers

SOURCE: All channels locked out!!!

You might have to reset the scanner, refer to page 70-71 of your manual. If you need a manual go here,,,
http://support.radioshack.com/manuals/ome20-496.pdf

Hope this helps,,, Mechanic

Posted on Jan 25, 2008

  • 8 Answers

SOURCE: Auto Channel Search

sounds like the tuner section of the main pcb isn't working properly.

Posted on Aug 21, 2008

Danmart
  • 291 Answers

SOURCE: auto channel search.

Check the r/c[remote control] for ' fresh ' batterys.
Do you have " air wave " reception? or cable connection?
air wave reception will scan but cable reception can't scan because the channel is 'fixed' at ch.3 or ch.4.

Posted on Nov 30, 2008

  • 45 Answers

SOURCE: olevia not searching channels

try the following..

Q. Why are the menu settings that I changed not being saved? A. The TV is in Showroom mode. The following steps will help you switch to Home mode.

  1. Press Menu button from the remote,
  2. Press Down arrow key until you see the word Picture, then press the Right arrow key,
  3. Press Down arrow key until you see Mode, then press the Right arrow key,
  4. Press Down arrow key until you see Power Up, then press the Right arrow key,
  5. Press Down arrow key until you see Home, then press the Enter key,
  6. Press Menu button four times to exit out from the OSD Menu.
***Showroom mode is designed for retailers to display the TV and to protect from shoppers changing the settings that are predetermined for shelf display environment.***.

Q. Why does my TV display "No Signal" or "Channel not in List"? A. Channel search needs to run the very first time of use or after the default settings are loaded from the OSD menu. The following steps will guide you through the process.
  1. Press Source button until Tuner is visible on the upper right corner,
  2. Press Menu button from the remote,
  3. Press Down arrow key until you see Setup, then press the Right arrow key,
  4. Press Down arrow key until you see TV, then press the Right arrow key,
  5. Press Down arrow key until you see Auto Channel Search, then press the Right arrow key,
  6. Press Down arrow key until you see Air (for antenna; select Cable if you have cable service), then press the Right arrow key. The scan process will start.
  7. Wait until the process is complete then you will be able to select the channel you like to watch.

Posted on Jul 29, 2009

pabloloco
  • 2335 Answers

SOURCE: Polaroid FLU-2632 channel searching

Often when using a Sky box, one doesn't use the channel tuning feature of the Polaroid HDTV. Often one connects the Sky box to a component video input, and the Sky box does the tuning.

I hope that helps.
___________________________________________
Polaroid FLM-2632 Manual Download
Polaroid FLM-2632 Service Manual Download

Posted on May 01, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Radio want stop scanning


your keyboard membrane is needing cleaned with IPA you must have spilled coke or pepsi or somthing conductive on its membrane so i would just look to replace it you need to perhaps replace some capacitors in the controller board section {mpu for it} i think dry caps cause this esp low value ones around the mpu

Apr 24, 2014 | Connex 3300 240-Channels Base CB Radio

1 Answer

What kind of meter is needed to check modulation on cb radio


astatic 600.It has 3 windows for SWR, Power handles up 5000 watts and modulation cost about 120.00

Sep 06, 2012 | Connex 3300 240-Channels Base CB Radio

1 Answer

Fix my connex 3400 hb sideband button


Hi there, if you are talking about the Connex CX 3400 HP there is no sideband or SSB on this radio. It is only AM and FM 10 meter Ham radio. Many people do modify these radios to include the 11 meter frequencies which is the CB band. Maybe knowing the actual bands and their frequencies will help some too this radio does have 6 different bands ranging from (Band A. 28.015 thru 28.455) (Band B. 28.145 thru 28.585) (Band C. 28.115 thru 28.555) (Band D. 28.085 thru 28.525) (Band E. 28.055 thru 28.495) (Band F. 28.025 thru 28.465.) I hope this will help you. Bob

May 13, 2012 | Connex CX-3400hp AM/FM 10 Meter Amateur...

1 Answer

I have no sound from my radio. Can you tell me where I can send it for repair?


Goggle CB repair shop and you will get a bunch of shops. Add your city and state in with your search and you will get one in your area and save on shipping.

Mar 08, 2011 | Connex 3300 240-Channels Base CB Radio

1 Answer

How to convert a connex 3400 hp to cb radio band from 10 meter band.


That needs to be done by someone that knows how, theres soldering involved. most cb shops will do it for $free-$10.00... Don't pay any more than that.. there are no parts nor is it hard so they shouldn't charge much.

Feb 12, 2011 | Connex 3300 240-Channels Base CB Radio

1 Answer

Connex 3400 ,talkback distortion.


you most likely have a bad knob the pot need to be replaced

Apr 04, 2010 | Cobra 148 GTL 120-Channels Base CB Radio

1 Answer

How do you dim display lights on a connex cx 3400 hp


O the front you should have a dim switch its on of 4 up & down switches ? if not check on the back ? was it bought as a new cb or was it 2nd hand as the dimmer switch may of been used for something else

Mar 09, 2010 | Connex 3300 240-Channels Base CB Radio

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

68 people viewed this question

Ask a Question

Usually answered in minutes!

Top Connex Radio Communications Experts

Chris

Level 2 Expert

197 Answers

Damon Nesselrodt
Damon Nesselrodt

Level 2 Expert

197 Answers

Ray Murphy

Level 2 Expert

68 Answers

Are you a Connex Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...