Question about Krups Coffee Makers & Espresso Machines
Error 9 is only related to the NTC on the front of the thermobloc. That's the wires, terminals or the resistor on the NTC that changes value with heat.
Posted on Sep 25, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
After I changed piston sealing I get the same error 09. It was caused by missing connection to the thermoblock temperature sensor. In my case both connectors for thermocouple were cracked. They are located directly on the body of thermoblock, below two fuses, covered by rubber housing. After I solder them again on the position error 09 disappeared. Unfortunately it is necessary to open at least front panel of the machine. Moreover I tink that there is also important to save polarity of those two cables.
Posted on Aug 07, 2009
Tips for a great answer:
Sep 19, 2018 | Krups Coffee Makers & Espresso Machines
Sep 18, 2018 | Krups Coffee Makers & Espresso Machines
Jul 03, 2018 | Krups Coffee Makers & Espresso Machines
May 05, 2018 | Coffee Makers & Espresso Machines
Sep 08, 2015 | Krups Coffee Makers & Espresso Machines
Feb 11, 2014 | Coffee Makers & Espresso Machines
Aug 01, 2009 | Krups Coffee Makers & Espresso Machines
Jun 06, 2009 | Krups XP4030 Espresso Machine
131 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: