Question about Samsung Office Equipment & Supplies
The error indicates that you have not installed the imaging unit. If you have installed it already, uninstall and reinstall the imaging unit.
Open the front cover of your Samsung printer and locate the imaging unit, it will be present at the bottom, below the toner cartridges.
A small black plastic with copper terminals will be present at the front of the imaging unit.
Remove the Fuse Housing. A 200-ohm resistor and an option 50-ohm resistor will be available.
Remove the blown fuse resistor, if applicable. Else, replace the 56-ohm resistor.
Place the 56-ohm resistor on the 200-ohm resistor. Now, place the fuse housing back, power On the printer, after the reset process the red light will go out.
If the issue is not solved, make sure the new and the old resistors are having proper contact with each other.
Ensure you are using the correct value of the resistor.
Turn Off and On the printer. For Support Call our Toll-Free 1-866-293-9220
Posted on Oct 09, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Oct 09, 2018 | Samsung Office Equipment & Supplies
Feb 13, 2012 | Samsung CLX 3160fn All-In-One Printer
Dec 30, 2010 | Samsung CLP 300 Laser Printer
Dec 06, 2010 | Samsung CLX 3160fn All-In-One Printer
Dec 06, 2009 | Samsung CLP 315 Laser Printer
Aug 17, 2009 | Samsung CLX-3160 All-In-One Laser Printer
May 07, 2009 | Samsung CLX 3160fn All-In-One Printer
Apr 04, 2009 | Samsung CLP 300 Laser Printer
Dec 12, 2008 | Samsung CLP 300 Laser Printer
Aug 08, 2008 | Samsung CLX-2160N All-In-One Printer
210 people viewed this question
Usually answered in minutes!