Question about KitchenAid Food Mixers

1 Answer

Why is mi kitchenaid classic starts a too fast speed ?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • KitchenAid Master
  • 1,343 Answers

If it is running too fast at start on low speed there are 2 likely causes. The speed control plate or the low speed stop screw are out of adjustment. If this problem happened instantly rather than getting slowly worse over a long time then it is unlikely to be this. The other cause is a faulty phase board, that is the very small PCB under the back cover at the very top. It has 4 wires coming off it. They are not at all expensive to buy and easy to replace. One screw holds it on and just the 4 wires to clip off the terminals on the black speed control plate.

Posted on Oct 12, 2018

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Kitchenaid K5A mixer 10 speed only runs on fast, no slow speed

Pull the back off and there will be two screws at the top of the Speed Control Plate and a 3rd screw at the bottom. Tighten the top two screws down. bakerboy49203@yahoo.com. Let me know if it works.

Posted on Mar 21, 2009

  • 130 Answers

SOURCE: Kitchenaid K45SSWH Mixer only starts fast then sometime slows

You can try adjusting the speed control as shown in section 6 of the service manual:

http://lib.store.yahoo.net/lib/mendingshed/kitchenaidservicemanual.pdf

Also remove and clean the brushes as shown in the same manual pg 8 fig. #30.

Posted on Apr 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a kitchen aid stand mixer. model #rkt2651x. it goes very fast when turned on then shuts off. it will go again but turns right off again. age?


That is indicative of worn motors brushes or a speed regulation circuit board problem. It is worth getting it fixed.

I just checked and my diagnosis is sound :>)

I have a kitchen aid stand mixer. model #rkt2651x. it goes - Fixya

www.fixya.com/support/t26909658-kitchen_aid_stand_mixer_model
52 mins ago - i have a kitchen aid stand mixer. model #rkt2651x. it goes very fast when turned on then shuts off. it will go - Food Mixers question. SOLVED: Mixer goes really fast then stops
29 Dec 2007
Questions, Troubleshooting Help & Support Page 3
28 Jul 2006
More results from www.fixya.com

KitchenAid Classic Mixer K45SSWH Troubleshooting - iFixit

https://www.ifixit.com/Wiki/KitchenAid_Classic_Mixer_K45SSWH_Troubleshooting Make sure the KitchenAid Mixer is firmly plugged into a working outlet and the cord is not twisted or split. ... If your mixer still will not turn on, it might be a problem with the motor brushes. If the brushes are worn down ... The most common sign of a failing hall sensor is if your mixer increases to top speed and then shuts down. Missing: rkt2651x

Stand Mixer Shuts Off During Use - KitchenAid Product Help

producthelp.kitchenaid.com > ... > Stand Mixer Assembly and Operation Jul 12, 2017 - Once the steam has dissipated, the unit should turn on again (about 3 minutes). Resolution: If the mixer could have overheated during use let the mixer cool for at least 30 minutes and try to re-start. If you were making mashed potatoes when the mixer shut off it's possible that with excessive steam the unit ... Missing: rkt2651x

images for kitchen aid rkt2651x stand mixer goes very ...





More images for kitchen aid rkt2651x stand mixer goes very fast when turned on then shuts offReport images

FAQs - KitchenAid

https://kitchenaid.com.au/faqs Explore our range of frequently asked questions to get the very most out of your KitchenAid product. Missing: rkt2651x

[PDF]Classic Stand Mixer Speed Control - KitchenAid

https://kitchenaid.com.au/sites/.../stand_mixer_service_manual_speed_control_6-12.p... KitchenAid®. Classic Stand Mixer. Speed Control. Theory of Operation. And. Troubleshooting Guide. (revision date 6/19/2012). D. Pahl ... Mixer Does Not Shut Off page 6. Mixer Does Not Turn On page 7 ... the motor is not running (OFF) the governor ball plate is at its farthest forward position and when the motor is running at ... Missing: rkt2651x

How to Replace the Speed Sensor and Control Board on a KitchenAid ...

? 6:28
https://www.youtube.com/watch?v=41qTqTWQkMI Jan 15, 2013 - Uploaded by eReplacementParts.com
This video tutorial will show you how to replace the speed sensor and control board on a KitchenAid Pro 6 ...Missing: rkt2651x ‎turned kitchenaid rkt2651x stand mixer goes very fast when turned on then shuts...

Mar 10, 2018 | Food Mixers

1 Answer

KitchenAid mixer speed surges high and low uncontrolably


You can get the high speed back if you want to play with those three screws. there is a timing scheme for your mixer and it is set and adjusted by manipulating those 3 screws. The bottom center screw is for speeds 6 8 and 10. The best choice is to replace this switch, about $10 bucks on ebay.

Nov 13, 2012 | KitchenAid K45SS Classic Stand Mixer

1 Answer

I have a Hobart KitchenAid Mixer Model K45SS and it runs fast on low (Surges speeds up and down)what is causing this problem


Hello Mayfix,

The problem with your mixer is the speed control switch, this switch is located at the back of the unit. It is usually black and has all of the wires coming into it, the Item # 1394070 and cost $27.95 it can be located at RepairClinic.com he is a link
http://www.repairclinic.com/Kitchenaid-Switch-Parts?z=100&gclid=CKSD5NriuKcCFUVqKgodIE2b_g

You will have to adjust after you install you will adjust the two screws at the top of the switch while the machine is running inorder to make sure that you are getting all the speeds. Be careful as there is a possibility of electrical shock if you touch the wronge thing.

Thank you for using FixYa.

Jul 04, 2010 | KitchenAid K45SS Classic Stand Mixer

1 Answer

Speed is off, only have fast and faster


Likely, you have an open resistor pack which may or may not be repairable located near the rear of the motor housing. Hope this helps!

May 23, 2010 | KitchenAid K45SS Classic Stand Mixer

1 Answer

Kitchenaid K45SSWH Mixer only starts fast then sometime slows


You can try adjusting the speed control as shown in section 6 of the service manual:

http://lib.store.yahoo.net/lib/mendingshed/kitchenaidservicemanual.pdf

Also remove and clean the brushes as shown in the same manual pg 8 fig. #30.

Apr 11, 2010 | KitchenAid KP2671 Professional 6 Series...

1 Answer

Kitchenaid mixer running too fast.


Change the speed control board. Repair alot of these

Dec 24, 2009 | KitchenAid K45SS Classic Stand Mixer

1 Answer

I just got a KitchenAid INC Classic model K45SS-won't turn off


Yes it sounds like it should be easy to fix. You will need to establish what is preventing the speed control mechanism from moving as it should. It sounds mechanical. Try removing the back cover and checking what moves (or doesn't) when the speed lever is moved.

Jul 03, 2009 | KitchenAid K45SS Classic Stand Mixer

1 Answer

Kitchen Aid stand mixer just started going really fast at the lowest speed. I tried checking the sensor as some have suggested but is still goes really fast. It's only been used a few times. Is there...


Hi. Goto www.mendingshed.com , locate and download the free Kitchenaid Service Manual. This is a comprehensive manual and will help you with your task. You can also go to the Kitchenaid website and download the Parts Catalog for your mixer model.
Good luck!

If this solution has assisted you, please rate it. ricardok45.

Mar 10, 2009 | KitchenAid K45SS Classic Stand Mixer

Not finding what you are looking for?
Food Mixers Logo

Related Topics:

396 people viewed this question

Ask a Question

Usually answered in minutes!

Top KitchenAid Food Mixers Experts

Appliance engineer

Level 2 Expert

138 Answers

CJ C
CJ C

Level 2 Expert

66 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a KitchenAid Food Mixer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...