Question about Electrical Supplies

Open Question

ABC 53 f why is adapter blinking blue and not turning red?

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
MNfisherman
  • 11896 Answers

SOURCE: I have a Panasonic 53" PT-53x54- 53" turns on for 5 seconds then

It is very common for the high voltage tranformer or flyback to wear out and not provide adequate power to the tv. You can test them with an ohmmeter to see how much powrer is being sent to the main circuit board. You can get parts at tigerdirect.com

Posted on Dec 13, 2009

Ad
SD Tech
  • 14553 Answers

SOURCE: panasonic projection tv pt 53 wx 42 f wont turn on and blinks red continuously?

3 blinks or 5 blinks and pause are most common on this set---try to watch and count the blinks and let me know which you find

Posted on Dec 12, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is my panasonic hdtv 1080i on off switch blinking red


thats usually an error code. How many times does the light blink?

Apr 02, 2013 | Panasonic PT-53WX53 53" Rear Projection...

1 Answer

Panasonic projection tv pt 53 wx 42 f wont turn on and blinks red continuously?


3 blinks or 5 blinks and pause are most common on this set---try to watch and count the blinks and let me know which you find

Dec 12, 2012 | Panasonic Televison & Video

2 Answers

Hello, I have a 53-inch Panasonic PT-53WX42F TV, and it refuses to turn on. No picture, no sound. All it does is the tiny red power light blinks 3 times repeatedly. Can I fix this myself? What parts do I...


Thats a convergence failure when the led blinks 3 times. Your model uses the PT47WX42 convergence repair kit available from www.tvrepairworld.com the kit contains the parts and the CD with instructions for the repair.

Jul 16, 2010 | Panasonic PT-53WX42 53" Rear Projection...

1 Answer

I have a Panasonic 53" PT-53x54- 53" turns on for 5 seconds then


It is very common for the high voltage tranformer or flyback to wear out and not provide adequate power to the tv. You can test them with an ohmmeter to see how much powrer is being sent to the main circuit board. You can get parts at tigerdirect.com

Dec 13, 2009 | Panasonic PT-53WX53 53" Rear Projection...

1 Answer

Top left and bottom right images/letters distorted.


I can fix it for $325? 213 880 1795
It was a convergence problem, both chips goes bad bad also look for bad resistors around the circuit? This is not an easy repair for non skilled person? You need to realign it after replacing the chips? Don't be cheap pay someone to do it right?

Oct 02, 2008 | Sony KP-53XBR45 53" Rear Projection...

4 Answers

No power


When I turn on the tv, there's the green light, that shows it's on, but it's blinking green and the screen is black

Jul 01, 2008 | Hitachi 53UDX10B 53" Rear Projection...

1 Answer

Free Pulse


The following procedure will re-establish the communication link between the Headphones and the Wireless adapter, this is called "pairing". Before you start please make sure both the headphones and the wireless adapter are fully charged and turned off.
Note: The headphones and the wireless adapter come pre-paired from the factory.
1. Press and hold the power button on the headphones. See Figure 1.
headphone.jpg
Figure 1

2. Continue to hold the button down until the LED starts flashing red/blue in an alternating pattern. Release the button when the LED starts flashing red/blue. See Figure 2.
headphone-flash.gif
Figure 2
3. Once the headphones LED is flashing red/blue, press and hold the power button on the wireless adapter. See Figure 3.
receiver.jpg
Figure 3
4. Hold down the button until the LED starts flashing red/blue in an alternating patter. The LED will blink blue, then turn off for a few seconds then blink red/blue. Release the button when the LED starts flashing red/blue. See Figure 4.
receiver-flash.gif
Figure 4
5. Once both the headphones LED and the adapter LED is blinking red/blue, press the volume up button once on the headphones. See Figure 5.
headphone-volumeup.jpg
Figure 5
Once the headphones is paired with the adapter, the LED on the headphones will blink blue once every two seconds. See Figure 6.
headphone-flash2.gif
Figure 6
When the adapter is paired the LED will be solid blue. See Figure 7.
receiversolid.jpg
Figure 7
The adapter may continue to blink red/blue for a few seconds even after the headphones LED starting blinking blue. This is normal; the adapter may take a few additional seconds before the LED turn solid blue.
Once the headphones and the adapter are paired, it is not necessary to pair them again even if the batteries on both units are completely drained.
Additional Note: Repeated pairing will not improve the sound quality or give the headphones and the adapter a cleaner connection.

Mar 11, 2008 | Logitech FreePulse Wireless Consumer...

1 Answer

SONY REAR PROJECTION TELEVISION TV KP-53V85 53 IN


When the set turns off, does the red timer LED blink on the front of the set? If so, how many times does it blink? The number of blinks corresponds to the reason the set shut down.

Jul 05, 2007 | Sony KP-53V85 53" Rear Projection...

Not finding what you are looking for?
Electrical Supplies Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electrical Supplies Experts

Craig Butler
Craig Butler

Level 3 Expert

1730 Answers

Gene Haynes

Level 3 Expert

5353 Answers

Brad Brown

Level 3 Expert

18072 Answers

Are you an Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...