Question about Furniture
E2 is a temperature fault code indicating a problem with the temperature sensor. Change the sensor and it will likely solve the problem.
Posted on May 02, 2019
TRY THE MANUFACTURER'S WEBSITE ,PERHAPS THEY HAVE TECH SUPPORT . WE HAVE NO CLUE FOR YOU HERE
Posted on Dec 30, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: E4 Code
Between phone calls to danby and my neighbor, we fixed this problem. My E4 was on the left (lower chamber). If you have one on the right it is the upper chamber. The E4 is a defrost sensor that can be ordered from Danby's distributor (call Danby for the one in your area). The part and shipping were around $30.
If your E4 is on the left...
- remove the top shelves
- open the cover inside the cooler above the digital read outs (the top unscrews)
- inside is were the repacement sensor plugs in
- replace the one with the long cord
- run the sensor down the back to the lower chamber
- replace all covers and parts
If the E4 is on the right...
- remove the top shelves
- look on the right hand wall for a black plastic grate, the sensor is under this grate
- replace the sensor (simple plug and play)
- replace the racks.
Please pass this on, it was a ***** to deal with Danby and I nearly trashed the cooler out of sheer frustration.
Posted on Jan 01, 2009
repair directory link
this is the direct link for repair service enginers just select the proper unit of yours and your area location.
Posted on Mar 02, 2009
Believe it or not we had the same problem.... The air filter should be changed about every six months but it is just charcoal or baking soda or something like that and is not attached to any sensors. To reset the flashing light, make sure the control panel is unlocked then hold down the on/off and (-) buttons and it will reset.
Good Luck! Elisabeth
Posted on Sep 01, 2009
Tips for a great answer:
Mar 18, 2014 | Frigidaire 38-Bottle Two-Temperature Zone...
Aug 13, 2012 | Furniture
May 29, 2012 | Furniture
Jul 02, 2010 | Danby Silhouette DWC512BL Wine Cooler
Apr 30, 2010 | Haier HVUE08A Wine Cooler
Aug 22, 2009 | U-Line 15WC Wine Cooler
May 09, 2009 | GE PWR04FANBS Wine Cooler
May 27, 2008 | Magic Chef MCWC30MCG Compact Wine Cooler
156 people viewed this question
Usually answered in minutes!