Question about Pioneer Car Audio & Video

1 Answer

Amp error no volume then shuts down radio

AVH-Z5050TV pioneer

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Habit-Forming:

    Visited the website for 3 consecutive days.

    New Friend:

    An expert that has 1 follower.

    Welcome Back:

    Visited the website for 2 consecutive days.

  • Contributor
  • 1 Answer

Check out the ground wire , make sure it's attached to bare metal on frame of vehicle.

Posted on May 14, 2019

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
mattozan
  • 555 Answers

SOURCE: error-02-9e this code error message

Your manual is available here.

Posted on Apr 05, 2008

SOURCE: how to instal my pioneer avh-p57000dvd

you have to run a toggle switch to do it connect the part where it runs from the dvd player to the main connector on the toggle then find a ground and connect that to the ground on the toggle and flip the switch put a dvd in and should work

Posted on Aug 15, 2008

ward_knutson
  • 64 Answers

SOURCE: pioneer AVH-P5700 instalation

You can find a wiring diagram for your 87 monte at http://www.modifiedlife.com/1987-chevrolet-monte-carlo-car-audio-wiring-schematic/ You can refer to the installation manual for your deck at http://akamaipix.crutchfield.com/Manuals/130/130AVHP570.PDF Since you are removing a shaft style radio and installing a DIN style you will need to perform extensive modifications to your dash. The Pioneer manual provides the dimensions.

Posted on Nov 25, 2008

pumpkinman
  • 1176 Answers

SOURCE: i have a avh p5700dvd and when i put a cd in it reads error 02

http://www.pioneerelectronics.com/pio/pe/images/portal/cit_11221/212667155AVHP5700DVDOperationManual.pdf

Posted on Nov 07, 2009

ABKSeeker
  • 69 Answers

SOURCE: install a pioneer AVH-P6800DVD

Here is a link to the manuals for this device:
http://www.pioneer.co.uk/uk/support/manuals/AVH-P6800DVD/index.html

1st manual is the installation manual, it is mislabled.

Cheers!

Posted on Feb 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to fix pioneer avh-6500dvd


Buy soche wire harness adap kit

Apr 08, 2014 | Car Audio & Video

1 Answer

AVH-p4450bt can't connect to bluetooth saying Error-10 help!!! :(


my avh p 4450 radio shows error10 don't want to pair up how do I reset radio I did plug it out already and theres no reset button on radio thanx

Feb 02, 2013 | Pioneer Avh-p4450bt 7" Bluetooth Gps...

1 Answer

Pioneer 4000 shuts off when touching anything


Reload software from Pioneers support web sight.

Jul 23, 2012 | Pioneer AVH-P4000DVD Monitor

1 Answer

My pioneer avh-p5000 wont unmute. I have already pulled the faceplate off and reset it by pressing the reset button and when I turned it back on it was still muted. It doesent matter what source it is on....


  • Hello and thank you for the opportunity to assist you.

  • Are you getting any errors numbers? Any special icons on the screen? Cables hooked up properly?

  • Have you tried just turning the volume up to see if the mute removes itself? I know you press the knob to mute it but turn the volume up to increase the volume.


  • When you reset the radio did you follow these steps exactlly?

  1. Ignition off first.
  2. Then remove the front panel.
  3. Now engine on.
  4. Now press and hold the reset button for 5 seconds.
  • If your steps were different try this first. If they were the same then you need to reset the entire unit not just the processor.

  • To do a master reset the unit must loose power for a couple minutes. In other words unhook the power or remove both battery cables for two minutes and try it again. Make sure to have any codes you need handy before doing this procedure.

  • Let me know how you do with these steps. If it takes care of you please do rate and comment.

Regards,Tony

Nov 27, 2011 | Pioneer Auto Video Bypass Avh-p5000dvd...

1 Answer

Bypass without switch


Get a relay (4 or 5 pin) from Autozone, O-Reilly, PEP Boys, etc....
Connect wires as follows on relay:
Pin #86 - Amp remote from your radio (blue wire)
Pin #30 and #85 - to a chassis ground (metal dash bracket)
Pin #87 - to Parking brake input wire on your radio (light green)
Pin # 87a - IGNORE. It isn't used in this case.

What this will do is.....
Radio will power on when you turn your key. The amp wire is delayed slightly and will trigger the relay in a second or two. This tricks the radio into thinking your e-brake has been engaged and violla....Mine has worked everyday since I connected it.

Apr 07, 2009 | Pioneer AVH-P4000DVD Monitor

1 Answer

Lots of distortion


You are either expecting too much from the system or something is overdriven somewhere.

Check the level controls "gain structure" is about having each item in the chain that has a volume control set at the ideal level, rather than having one thing on max and another on min to compensate.

Also, check wiring. Partial short circuits can cause issues such as this. A full short circuit would likely cause the unit to shut down completely.

Mar 28, 2009 | Pioneer AVH-P6600DVD Car DVD Player

1 Answer

I have volume Problems with Pioneer AVH-P5700DVD Car DVD Player, i can turn it down but not back up ???


Make sure the attenuator is not on. Also make sure the unit isnt performing still, slow motion or frame by frame play back. You can also use the troubleshooting guide from the manual located at: http://akamaipix.crutchfield.com/Manuals/130/130AVHP570.PDF

Nov 15, 2008 | Pioneer AVH-P5700DVD Car DVD Player

1 Answer

Pioneer Avh P5700


might need laser cleaning. try a laser cleaning disc from most electronic shops

Jul 19, 2008 | Pioneer AVH-P5700DVD Car DVD Player

1 Answer

Error 2


sometimes the laser gets dirty- to clean the laser your radio will have to be dismantled( not an easy job for your head unit) then put some computer disk head cleaner on a no lint shami and VERY gently clean laser eye

Dec 12, 2007 | Pioneer AVH-P6600DVD Car DVD Player

1 Answer

My Pioneer Player Makes A Beeping Noise When Playing Music Videos


why does my pioneer avh-p5700dvd power up but it starts a beeping noise and then it shuts down ?

Apr 05, 2007 | Pioneer AVH-P5700DVD Car DVD Player

Not finding what you are looking for?
Car Audio & Video Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pioneer Car Audio & Video Experts

The Knight
The Knight

Level 3 Expert

76125 Answers

Marvin
Marvin

Level 3 Expert

85161 Answers

xxxxxx xxx

Level 3 Expert

5013 Answers

Are you a Pioneer Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...