Question about Electrical Supplies

Open Question

Paick G28 How do I know if it is on or off

The manual is sparse on info

Posted by on

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My 1998 deville spits, sputters and backfires and won't stay running


Your description is pretty sparse. The first thing I'd look for is the timing. For this you will need a timing light. Check inside your distibutor for signs of arcing. An engine grossly out of time suggests the possibility of a timing chain or the cam sprocket are so badly worn that the engine has "jumped time". I'm sorry but given the minimal info available that's all that comes to mind at the moment.

Sep 14, 2017 | Cadillac DeVille Cars & Trucks

1 Answer

I had a honda g28 power tiller its leaking gas and when we try to pull start the gas also coming from exaust and it nevar started


Sounds like the carburetor is leaking fuel due float needle not closing completely. The carburetor will need cleaning and worn or bad parts replaced. Also it sounds like this leaking fuel has filled the engine's crankcase ruining the engine's oil.

The only way I could find anything on the G28 engine is to look-up the F28 Rototiller.

Feb 13, 2015 | Honda Garden

1 Answer

Candy washer dryer cmd46 stopping mid cycle


your info is too sparse pat what cycle what point in the cycle
is it full or water is it rinsing ???

Aug 19, 2014 | Candy Washing Machines

1 Answer

Flywheel timing


Hi. The amx does not ahve a flywheel pick up. the crank sensor g28 is on the side of the block. The flywheel have offset bolts so can only be fitted in the correct position. The best way to set tdc is with a special tool that goes into the side of the block at g28 sensors hole, or to set tdc with a dial gauge on cylinder 1. I don't yhink the flywheel fitment is the issue with this vehicle. Have you disconnected the air mass meter and run the car to see if it is beter? The air mass meter commonly fails when disturbed during repairs.

Jan 15, 2014 | Volkswagen Passat Cars & Trucks

1 Answer

Passat crankshaft sensor


Hi. The amx does not ahve a flywheel pick up. the crank sensor g28 is on the side of the block. The flywheel have offset bolts so can only be fitted in the correct position. The best way to set tdc is with a special tool that goes into the side of the block at g28 sensors hole, or to set tdc with a dial gauge on cylinder 1.

Jan 12, 2014 | 2002 Volkswagen Passat

1 Answer

How do i replace a igniter and bulb in a 2007 gl450


Info too sparse. I will have to assume a lot. Provide more info.
Gas stove..?
Ignitors that light the oven or the burners? or both?
Bulb..=oven bulb? other bulb?
Make/name of the appliance?

Oct 20, 2013 | Kitchen Ranges

1 Answer

Fujifinepix L55


You may download a copy of the manual here.

Jul 24, 2012 | Cameras

1 Answer

99volkswagen shown code po322 what do I need


Possible Symptoms
  • Engine shuts off
  • Engine doesn't start
  • Speedometer inoperative
  • Glow Plug Indicator Lamp (K29) flashes

Possible Causes
  • Engine Speed Sensor (G28) loose
  • Engine Speed Sensor (G28) faulty

Possible Solutions
  • Check Engine Speed Sensor (G28)

Special Notes
  • The Engine Speed Sensor (G28) is also used as a reference sensor for the crankshaft position.

Jun 12, 2011 | Volkswagen GTI Cars & Trucks

1 Answer

I am trying to repair my kitchen faucet. The brand is Kohler. I purchawed a "Bradley-Cole and Kohler" replacement cartridge and am unable to accomplish this task with the very sparse...


Did you get a cartridge removal tool a lot of kohler faucets require a tool to replace the cartridge,if that dosen't help what problem are you having more info on what exactly is the problem that you are having will help me to know how to help you.

Jun 07, 2011 | Danze D203112 Melrose Single Handle...

2 Answers

Maax infinity hot tub error code clfl dont have the manual


Found at http://www.maaxcollection.com/Produits/ProductInfo.aspx?cat=1&fmly=1315&mdl=1851&sp=2%3b5%3b215

Click on "Installation Guides" under the "Downloads" blue highlighted box. Then download the "Whirlpool Installation and User Guide".

Quite sparse on error codes, but p19-23 have some.

...soon to be owner/user Maax Infinity bahtubber

Jan 26, 2010 | Maax INFINITI HYDROMAX AIRPOOL II CORNER...

Not finding what you are looking for?
Electrical Supplies Logo

Related Topics:

52 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electrical Supplies Experts

Craig Butler
Craig Butler

Level 3 Expert

1730 Answers

Gene Haynes

Level 3 Expert

5353 Answers

Brad Brown

Level 3 Expert

18072 Answers

Are you an Electrical Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...