Question about LG Refrigerators
Yes it can be fixed but you will need a service technician. You can call Sears service.
Best of Luck,
Posted on Jan 10, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Ice maker, I don't know where you can find the manual but I'll give you a few ideas of what to look for. First make sure that the inlet tube is not frozen over. Next, look at the center gear on the module and see if the clips in the center are not broken. If so you will have to replace the module. The ejector blades should be at the 2:00 position when home. If you get a jumper wire and jump T to H, this will by pass the bi-metal and run a cycle. The ice maker should fill at around the 12:00 position. Test points L & N will verify if you have 120v to the ice-maker. Test points L & H will test the resistance of the heater, 72 ohms. plus or minus 10%. Hope this gets you going, Catriver...post back.
Posted on Aug 21, 2006
SOURCE: icemaker slow to make ice
Tener, sounds like you have a module going bad. Pull off the white cover of the ice maker and take a look at the center white gear. There should be two clips securing the gear on. A lot of times these clips break and cause the gear not to rotate properly. Part number for the module is 628399. Take a look at this first. Catriver..post back
Posted on Nov 02, 2006
SOURCE: E1 error on LG dishwasher
As per my email reply chazmano5, the problem is likely to be the water pump/motor assy.
They have a very common fault of the impeller breaking on the motor shaft. The motor still spins, but the impeller doesn't, so there is no water being pumped.
The machine senses there is no water pressure and shuts down, displaying E1 (eg: it thinks no water pressure means there must be a water leak) Unfortunately the motor/impeller is only available as a complete assembly.
Posted on Dec 11, 2008
PROBLEM IS ASSOCIATED WITH THE TEMP SENSOR INSIDE ICE MAKER. I HAVE TRIED TO FIND THE PART, BUT WITH NO LUCK. IT LOOKS LIKE WE WILL HAVE TO PURCHASE A NEW ICE MAKER.
Posted on Aug 15, 2009
Tips for a great answer:
Oct 14, 2018 | LG Refrigerators
Mar 12, 2016 | LG Refrigerators
Jan 09, 2018 | Liebherr Refrigerators
Sep 04, 2013 | LG LFX28968ST Refrigeration : Refrigerator...
Dec 18, 2012 | Whirlpool ED5LHAXW Side by Side...
Jun 07, 2012 | Whirlpool GX5FHTXVA Bottom Freezer French...
Mar 29, 2010 | GE PSC23SGR Stainless Steel Side by Side...
Mar 27, 2010 | LG LFX25960ST Stainless Steel French Door...
Sep 10, 2009 | GE (PSS26MSRSS) Side by Side Refrigerator
26 people viewed this question
Usually answered in minutes!