Question about Fisher Dishwashers

1 Answer

So i have a fisher pykal double drawer dishwasher. The top drawer doesnt work. Still has power...but doesnt make the chime when u pull it open. No code is being trown. Doesnt start gives a chime that says...to bad...help

Posted by on

  • Christie Strusz
    Christie Strusz Jan 11, 2019

    Weve tried resetting n tried the lock n unlock neither helped

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Passionate:

    Visited the website for 10 consecutive days.

  • Expert
  • 138 Answers

Although I'm not familiar with this model, it sounds like a switch is stuck or misaligned. With most electronic things, there's a physical toggle switch (sometimes 2 magnetic points, similar to a window security system) located somewhere along the drawers tracks or latch or at the back. Try to find it and see if it still freely moves. If it does than most likely the switch has failed and needs replacement. Hope this helps and good luck!

Posted on Jan 11, 2019

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Fisher Paykel Dishwasher Door Open error code

If it is a dish drawer type there is a clip at the rear of the drawer that holds the drawer closed. you will need to withdraw the drawer partially to look in. with the drawer open the fingers should be facing towards you. If not you will need to reach in and pull the top of the fingers towards the front. there is a replacement arm that holds the pipes and cables away from this part.

Posted on Nov 24, 2007

rickzilla
  • 706 Answers

SOURCE: Fisher & Payke dishwasher top drawer

Try shutting off the power to the dishwasher for a minimum of 5 - 10 seconds then see if that resets the control system.... here is a link for the manual.. they have several trouble shooting sections within it to assist you.. http://www.fisherpaykel.com/global/customer-care/product-manuals.cfm
Hope this helps...

Posted on Sep 22, 2008

jyackle5
  • 8197 Answers

SOURCE: Fisher & Pykal Dual Drawer Dishwasher. Suspect

Press and hold the key or lock button for 5 sec or till you here a beep to unlock. Or till the light goes out above the lock button. You can get your manual here just find your dishwasher.

http://www.fisherpaykel.com/dishwashing/

Good luck and please rate

Posted on Sep 16, 2009

  • 572 Answers

SOURCE: Fisher & Paykel 2 drawer dishwasher: I too

he might have unplugged something in the proccess of drying the bottom

Posted on Feb 09, 2010

  • 3247 Answers

SOURCE: Fisher & Paykal DD6031 Integrated We have a

The fault you have described with the top drawer appears to be related to the lid seal becoming dislodged. However, I am slightly unclear if you can actually open the drawer or not. YOu mention it is hard to pull but you also say you see water at the bottom of the drawer. So I am assuming you are able to open the drawer. This is important otherwise it will become hard to check the problem.
It might help confirm if the lid seal is the problem if you can check which lights are on at the top of the drawer lid. For example NORMAL and RINSE. I am assuming since you have an integrated model there is no LCD display in the front.

If it is a lid seal problem then you may have to call the technician from Fisher and Paykel. It does involve a little patience and mechanical prowess to fix it. There is fiddling with motors etc involved.

You can check the parts out at this site.

Posted on Oct 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Top drawer can not be open


If this is a double drawer dishwasher and bottom drawing is functional but top drawer won't open means the controller on top drawer is faulty or power circuit is locked. If turning the mains power off and back on makes no difference then controller could be the problem. One way to test is to take the controller from bottom drawer and replace that in the top drawer. This requires a lot of patience and experience with electronic stuff. If you are not brave enough to test then call the technician. The controller is about $200 to buy. Make sure the mains power socket is taken out before working on the dishwasher internals.

FISHER PAYKEL DISHWASHER DD603 Parts

Feb 10, 2014 | Fisher and Paykel Dishwashers

1 Answer

Top drawer of my 8yr old fisher paykel dishwasher got stuck opening and now cant get it back in , botom drawer works but no power to top drawer can it be fixed ?


Not sure if your dishwasher problem has been fixed yet.

The lid seal actuator motors on the top drawer are stuck due to lack of power and therefore you cannot close the drawer. Don't try to force it in as this will cause damage.

First thing to do is to restore power to the drawer. The power comes from the filter board sitting at the base of the dishwasher. You will have to disconnect power to the dishwasher and get both the drawers out. This will give you access to the power filter board.

Refer item 15 in this diagram. It is likely the board is faulty and it supplies the lid seal actuator motor power to both drawers. (separate connections).

You have to take the front cover of each drawer out to remove the drawers from the rails. But be careful not to damage the cable and hose when pulling out. Keep a chair or something next to dishwasher to hold the top drawer.

Once you fix the filter board and restore power to actuator motors, push the lid seal up by hand to make sure it does not block the lid.
Hope this fixes the problem.

Oct 24, 2011 | Fisher and Paykel 23 in. DD-603 Built-in...

1 Answer

MY DISHWASHER IS LOCKED. IT PEEPS BUT IT DOES NOT OPEN


Please provide the model number of your dishwasher. If it is the double drawer unit which one is having the problem. If it is a single drawer unit then is there anything on the display.

Most likely the filter pcb at the base is faulty. This provides power to the actuator motor that controls the lid seal lock. You can pull open the drawer - with slight force. There is no way you can diagnose the problem without opening the drawer. Turn the mains power off first.

Nov 28, 2010 | Fisher and Paykel Dishwashers

1 Answer

Fisher Paykel double drawer built in top drawer stops mid cycle.


It would help to know which LEDS are on when it stops. Are you able to open the lid etc. Does this happen with the short rinse cycle as well?

Oct 17, 2010 | Fisher and Paykel 23 in. DD-603 Built-in...

1 Answer

Fisher & Pykal Dual Drawer Dishwasher. Suspect after young child played with control buttoms on top drawer the power won't come on. Bottom Drawer works perfectly. Have tried turning unit off at power...


Press and hold the key or lock button for 5 sec or till you here a beep to unlock. Or till the light goes out above the lock button. You can get your manual here just find your dishwasher.

http://www.fisherpaykel.com/dishwashing/

Good luck and please rate

Sep 16, 2009 | Fisher Dishwashers

3 Answers

Fisher & paykel double dish drawer top draw just beeps...


The controllers get very brittle & can break away from their housing, the reason it's rapidly beaping is because it thinks the door is open. PLEASE TURN IT OFF FIRST AT THE POWER POINT. Take the front draw panel off by pulling the plugs situated on the front behind the draws, the controller is at the top right hand side if it is loose then thats the problem, double sided tape will work but lots of it or try a wedge type arrangement. I know this is an old post but people refer to these for solutions much later.

Mar 09, 2009 | Fisher and Paykel 23 in. DD-603SS Built-in...

2 Answers

NO POWER Fisher Paykel DD603 double drawer


Check to see float switch (located on the bottom of cabinet below bottom draw )hasnt moved or dislodged in transit.(Access by way of back panel-easiest) or removing bottom draw.

Sep 02, 2008 | Fisher and Paykel 23 in. DD-603SS Built-in...

1 Answer

Fisher Paykel Dishwasher Door Open error code


If it is a dish drawer type there is a clip at the rear of the drawer that holds the drawer closed. you will need to withdraw the drawer partially to look in. with the drawer open the fingers should be facing towards you. If not you will need to reach in and pull the top of the fingers towards the front. there is a replacement arm that holds the pipes and cables away from this part.

Nov 18, 2007 | Fisher and Paykel 24 in. DD603H W Built-in...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

35 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fisher Dishwashers Experts

Alan Matzke
Alan Matzke

Level 2 Expert

99 Answers

Lollo Pop

Level 2 Expert

127 Answers

Kevin
Kevin

Level 2 Expert

79 Answers

Are you a Fisher Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...