Question about Icom Radio Communications

Open Question

Remote key pad for IC-7610, I press a button and just get a beep like no memory is loaded, but memories on screen work.

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
NickBeamAA

Nicholas Burress

  • 53 Answers

SOURCE: can only receive calls and turn the phone on and off! cannot dial out, access my contacts, ect., keypad not working at all.

If you are comfortable taking part of the phone apart there is something you can try. Remove the two Torx screws right below the battery. Gently pull the plastic cover loose. There will be a cable that connects this portion of the phone to the keypad/LCD/etc. Clean the connector on this cable and the connector it was plugged into with 99.5% Isopropyl alcohol. Reseat the cable and the part of the phone you removed and replace the screws you removed. If this does not work the keypad flex on the phone is probably damaged and will need to be looked at by a repair center.

Posted on Sep 07, 2007

Ad

Patrick

  • 56 Answers

SOURCE: My calculator is working well but only one button isn't working

I KNOW exactly what is wrong i had the same problem. you put a program like mirage or another application o your program on your calculator. no kids don't want teachers to deleter their games so mirage has a memory blocker. go into mirage then hit alpha then go to like protection options and stuff and turn off memory block. GOOD LUCK

Posted on Feb 04, 2008

Anonymous

  • 5 Answers

SOURCE: Toshiba Tecra 8100 will not boot, even the toshiba boot screen not displayed

http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/faq.jsp?z=234&service=EU&from=faq_selection&CFID=BIOS&FID=TRO0000000b07

Thats a link to info about bios updates on the tosh website. If you're not getting to the toshiba screen then POST has not completed which means that either there's a hardware problem or the bios is corupt. If you're sure the RAM is ok try flashing the Bios.

Problem is though, to make the bios update disc, you need a working computer.

and, err, It'll probably have to be a toshiba!
(sorry, not my fault!)

Posted on Mar 19, 2008

Anonymous

SOURCE: Half part is display

replace ic

Posted on Sep 29, 2008

Anonymous

  • 17 Answers

SOURCE: Programming an Icom IC R5 scanner

This is a problem with any scanner which has no keypad..

First set the squelch (gets rid of the hissing noise and allows the radio to scan)
to do this....

On the side are 2 buttons, the bottom one is monitor.
press and hold then look at the display,
turn the top dial until "AUTO" appears,

The squelch should now keep the radio quiet.

Now the tuning step..
You need to set this because if your radio was on 450.000 and you wanted to listen to 450.012.5 you would miss it if your radio was making 000.025 "steps". IE you would need 12.5 steps. This is the most common step used by ambulance etc in the UK, you will need to check local band plans.
Stick with 12.5 and you should get most stuff on VHF / UHF.
For airband 12.5 will get most stuff, but some is now changing to 8.33.
For HF (below) 136 Mhz I'd use 5

To set the step....

On the front there are 4 big buttons.
press [V/M.S.MW.SKIP] to select VFO mode,
then press [BAND.LOCK] to select the band you want to listen to,
then press [TS.SET] to enter the step
turn the dial to select your step (stick with 12.5 for now)
press [TS.SET] to exit back to VFO mode



To scan...

First set the scan type...
On the front there are 4 big buttons.
Press and hold the one that says [MODE.SCAN] for 2 seconds and look at the display,
turn the top dial until the screen reads ALL,
press [MODE.SCAN] again and the radio should start to scan with the 12.5 steps you set earlier.
If you want to change scan direction, just turn the top dial.
If you want to stop the scan, just press [MODE.SCAN].

When you hear something interesting, make a note of the frequency on the display.

To set memories (store frequencies).....

On the front there are 4 big buttons.
press [V/M.S.MW.SKIP] to select VFO mode,

to get close to the frequency you made a note of, press [BAND.LOCK]
Then set the actual frequency with the top dial,
press and hold [V/M.S.MW.SKIP] for 2 seconds to select memory write mode (1 short and 1 long beep)
turn the top dial to select which channel you would like to overwrite. Start with 01.
press [V/M.S.MW.SKIP] for 2 seconds. ( 3 beeps )

Thats it!

Any more problems just post on here and either me or someone else will help.

M3ODQ

Posted on Feb 02, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to erase memory in Brother 8690 MFC - it keeps printing unwanted faxes which are stored in the memory! It is junk mail and 20 pages long and I want to cancel it. When I press "Stop" and pull the power...


Try to press and hold Job Cancel button until a message Job Cancel (All) appears. Press OK to confirm.
If not working, the next is what I found in user manual:
Remove paper from the printer to stop it printing. Turn it on, if not.
Set Remote Access Code, if not already, pressing Menu, 2, 5, 2. Enter three digits - 1, 2, 3 - for example and press OK.
Dial your fax number from a telephone or another fax machine using touch tone. When your machine answers, immediately enter your Remote Access Code (these 3 digits followed by *). If you hear one long beep, machine is saying that you still have faxes in memory. Then you hear two short beeps, that mean the machine waits your command. Use the dial pad to press 9 6 3.
If you hear one long beep, fax messages have been erased from the memory.

Nov 03, 2017 | Brother Office Equipment & Supplies

1 Answer

Nokia 7610 phone memory formatting manualy


You can format your phone by two methods
first method:
1) press *#7370#
2)enter your security code(note:default code is 12345)
3)restart your phone
second method:
1)switch off your phone
2)press power button,press and hold *key,3key,green call button

Dec 07, 2010 | Nokia 7610

1 Answer

Nokia 7610 softwere problem what shell i do it is suddenly switchingoff


its due to virus attack, just format the phone memory. 1- make necessary backup of your phone memory to pc. 2- turn off your device 3- press *3 call button and switch on button together,when the display starts release all the keys and you are done
alternative method type *#7370# and enter security code.... while the mobile is on...

Dec 04, 2010 | Nokia 7610

2 Answers

My keyboard has problem, some keys didn't work well and some key didn't work at all. when turned on the PC it sound beep beep and it won't stop unless i touch some keys on the keyboard


Hello.

The most common reason for your problem is memory.

First, disconnect all cables Flip your notebook and look for the memory cover. Loosen the screw and remove the cover. Reseat (remove and reinsert) the memory (you may have 2 modules). Replace the cover. Power on your notebook to see if problem resolved.

If still a problem, follow above but leave one memory module (if 2 modules). Power on and test. If still a problem, remove the module and replace with the other.

Hopefully, this procedure will resolve your problem or determine if one memory module is bad.

Nov 24, 2010 | Acer Extensa 5420-5687 Notebook

1 Answer

The navigation keys of nokia supernova 7610 are not working.. and its memory card has also locked up itself ... plz help.....


open your phone cashing than also 4 screws under LCD.pick key pad,use( - )screw or cutter eyes.clean keypad connector use pencils erraser (it safety).also open white plastic on key pad clean it up too. its often happen.Good luck.

Apr 14, 2010 | Nokia 7610 Supernova Cell Phone

2 Answers

When i start my laptop nothing happens except i hear i beep.I press the power button again and i hear one beep.After about six times an xp page comes on that says windows did not load sucessfully.I go to...


Try starting windows in safe mode by tapping F8 repeatedly right after you press the power button - a black and white screen will appear asking if you want to start in safe mode - the arrow keys select the mode, press enter, let it load fully then use the start menu to shut down and restart normally. Windows is simply telling you it cannot load properly this restores a good configuration again for it to use. Regarding wiggling the power cord - possibly the plugin is either loose or broken inside and the joints that connect it may have to be resoldered, the case has to be taken apart for that. One beep usually means all is well on IBM, three beeps indicate a problem, not necessarily only memory. The bios (F1 or F2 usually) may contain an error log indicating exactly what the problem is and will be indicated by a number code - IBM has a list on their site of what the number codes mean. Occasionally the error code may display on the screen upper corner on start up if you wait for it to show after the beeps.

Oct 19, 2009 | IBM Lenovo ThinkPad R52 Motherboard -...

1 Answer

Nokia 7610 not working


you need to format your phone but you may lose all your memory details. To format your phone hold the following keys{* button, green/call button, 3 button and the power off button}. Holding these keys will format your button.

Jul 05, 2009 | Nokia 7610

1 Answer

I have a nokia 7610, some message is coming in outbox pls find the solution for it


JONYCHEMIST FORMAT PHONE MEMORY BY THIS WAY, To format nokia 7610 phone memory follow the steps: 1. Switch off ur mobile. 2. Press *,3,green buttons together 3. Now switch on ur mobile. Press these buttons till you notice a formatting screen on ur mobile Note : Make sure that mobile is fully charged & transfer all the important files, messages, contacts to memory card. bye dis is JONYCHEMIST

May 04, 2009 | Nokia 7610

1 Answer

KEYPAD PROBLEMS


Dear Make is software if ur phone key are working on wrong function. if not ok then change the key pad ic (both)even not ok then its prob from CUP check might be possible that when u press the button with speed ur mobile goes on restart then its prob from CPU.

Mar 30, 2007 | Nokia 7610

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

77 people viewed this question

Ask a Question

Usually answered in minutes!

Top Icom Radio Communications Experts

Perry Mellott
Perry Mellott

Level 2 Expert

147 Answers

Robert McClure

Level 2 Expert

161 Answers

Vincent G
Vincent G

Level 3 Expert

2361 Answers

Are you an Icom Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...