Question about Kenmore Washing Machines
Posted by Anonymous on
Hi, E2 code is a stuck button on the control board. Try wiggling each button then try pushing each button off center. That should free up any stuck buttons. If that doesn't free up button and erase the code then the control panel will need to be replaced. Hope that helps.
Posted on Feb 23, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: kenmore HE2 front load error 5d
It is possible that instead of 5d that you have a SD. The SD error is usually form an excess of suds in the washer. In most cases you can run the machine through a couple rinse cycles and clear that right up. If that does not work then you will need to clean out the drain and your pump filter. The filer is located behind the bottom panel and you just unscrew it from the pump. If infact you had a 5D error then I am sorry for misinforming you, I have just never heard of a 5 D and I have been services them for years. I really hope this helped you, good luck.
Posted on Nov 12, 2008
SOURCE: Front Loading washer Kenmore Ht3
Here are the steps to unlocking the door manually if clothes are still in the machine.
2.remove bottom panel
3.Reach up along the inside of the front panel and locate the botttom of the door latch assembly
4.Located on the bottom of the door latch assembly is a tear dropped shaped tab
5. Gently pull down on the tab about a 1/4 inch or until a click is heard.
6. You may now open the door.
This code means the door lock mechanism has failed or the central control unit has failed. Replace the door lock mech. first. This should fix the problem. (before replacing anything make sure there is no obstruction around the switch or in the switch.) After the machine has been unplugged it may fix itself. if not replace door lock mech.
Posted on Nov 21, 2008
SOURCE: kenmore he2t error code 21
F21 is a long drain...it is taking too long to drain..you have a something slowing down the drain.. you can remove the bottom panel and clean out coin trap... if there is nothing then you may have another problem... but this is the most common problem..
Posted on Sep 23, 2009
5d is a definitely a the code for a plugged discharge. We removed the lower access panel and discovered a virtual treasure: $12.50 in quarters, nickels, dimes and pennies, a pen, a pencil, collar stays, 10 bobby-pins, 3 barrettes, a elastic headband, a draw string, a box cutter, 3 washers, 3 broken zipper parts, a elastic waist band. Amazing it took all to trigger a 5d error code. Hope this helps!
Posted on Apr 03, 2010
check the water tempreture sensor and connection to it
heres some info that should help ya
hope this helps
HE2 Error Codes.pdf
HE2 Error Codes.pdf
Posted on Jul 18, 2010
Tips for a great answer:
Jul 22, 2018 | Kenmore Washing Machines
May 17, 2018 | Samsung Washing Machines
Mar 22, 2018 | Washing Machines
Jan 21, 2016 | Kenmore Washing Machines
Jan 12, 2016 | Kenmore Washing Machines
Dec 06, 2015 | Kenmore HE2 Plus Front Load Washer
Jul 17, 2010 | Kenmore HE2 Plus Front Load Washer
Oct 15, 2019 | Kenmore Washing Machines
121 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: