Question about Tag Heuer Watches

Open Question

Any idea why Aquaracer Automatic has stopped working? Well looked after daily ware watch. No memorable incidents in last week that can explain sudden issue.

Tag Heuer Aquaracer Automatic, was working fine but after several days of not being worn it needed rewound. When trying to wind in position 1 there is a slight grinding noise and the minute/hour hand turns as if it is in position 3. When trying to wind mb 'shaking' / moving is rotational motion, the second hand goes backward and the minute hand jumps around. Watch is only 1.5 yrs old.

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
ThaMp3Doctor
  • 8596 Answers

SOURCE: looking for the user manual for Tag Heuer Aquaracer watch

They were just hiding it:
http://ww2.tagheuer.com/_documents/manuals/EI2252_en.pdf

-Tha Mp3 Doctor

Posted on Dec 31, 2008

Ad
escapement
  • 2338 Answers

SOURCE: I own a tag heuer

Yes it is correct as your watch has a counterclockwise crown forward setting direction. This is due to the specificaly layered lever and setting gear construction, so, nothing wrong with your watch.
Do not forget to rate, please.

Posted on Jan 27, 2009

  • 1 Answer

SOURCE: tag heuer link automatic

exact same problem, no one seems to know

Posted on Mar 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi, I've got a automatic tag aquaracer watch that loses about 4 mins every month (about 4 yrs old). Common problem? Can this be fixed ? Or is it a lemon of a watch? Any advice welcome. Cheers.


If it's automatic and 4 years old, it's probably time for a watch overhaul. Auotmatic watches need overhauled about once every 4-5 years. It's normal for it to lose time, but 4 minutes per month may be a little extreme. So, get the watch overhauled. I would recommend Tag Heuer to overhaul it.

Sep 09, 2011 | Tag Heuer WAF2110.BA0806 Aquaracer...

2 Answers

My WAF2110 will ocassionally lose about 20 mins for no reason,also does this watch have an internal battery.


Automatic watches are spring driven and therefore do not have a battery.

Automatic watches thrive on being used and if you do not wear them sufficiently, they will run down and stop (or perhaps they run slowly before stopping).

Your watch should run for 38 hours before stopping.

Mar 31, 2011 | Tag Heuer WAF2110.BA0806 Aquaracer...

1 Answer

Battery Charge Life 10 years ago, not being able to afford a real TAG, I purchased a 'replica' Aquaracer Automatic in Bali. I am happy to say that I am now the proud owner of a real Aquaracer Automatic....


If you go to http://ww2.tagheuer.com/_documents/manuals/EI2246_en.pdf
you should arrive at the user manual for a Tag automatic watch which is similar to yours (an Aquaracer).

You will see that they claim 38 hour running when fully wound.

In view of the very small forces involved and the variations that occur in the manufacturing of the mechanism, I don't think that you should be surprised if there is a variation in running time.

If your genuine watch runs for a significantly less time thean they claim, you may have a reason to complain.

May 29, 2010 | Tag Heuer WAF2110.BA0806 Aquaracer...

1 Answer

Hi, I've owned my aquaracer for 1.5 yrs and it has just started to run slow, I've had to reset it 3 times this week... does this run off a battery?


I think it depends upo which model you have but the web site does not discuss this.

Generally, if it says "automatic" then it is spring driven (does it stop if you don't wear if for a few days?).

If it keeps going, when not worn then i is a battery driven type.

You can see the range of models on their web site http://www.tagheuer.com/the-collection/aquaracer/man/leonardo-dicaprio-ltd-edition/index.lbl?w=WAJ2116.FT6022. and you may be able identify yours from their list.

May 11, 2010 | Tag Heuer AquaracerWAF1110.BA0800 watch

1 Answer

Hi.i just boughta tag heuer grand carrera xx007344.immediately i got home,it stopped working.so,after abit of winding it starta working.but if i just drop for a minute or two,it stops working.even when...


Automatic watches will generally run for 2-3 days before the spring is fully unwound, so you are likely to have bought the watch in the unwound condition.

It can be wound by gently shaking the watch from side to side (for about 100-200 times). This should give it sufficent engergy to operate and thereafter normal use will keep it wound up.

If it stops working when the watch is rotated out of the face up position, then it may be that the watch is faulty. (If the watch has been dropped in transit, it may have been damaged).

If normal operation is not achieved, then send it back to get it repaired under warranty.

May 04, 2010 | Tag Heuer WAF2110.BA0806 Aquaracer...

1 Answer

Second hand not sweeping but jumps at 5 secs intervals. Appears to be keeping accurate time.


When the second hand moves in short jumps rather than a smooth sweep or a second-by-second hop, it means that the battery is about to run out. Usually, with a week or two the watch will stop working altogether. You should go and have it changed as soon as possible.

Aug 02, 2009 | Tag Heuer WAF2110.BA0806 Aquaracer...

1 Answer

My tag heuer aquaracer has a problem: the second hand stops and then speeds up really quickly for about 5 seconds. any idea why/how to fix it?


Your TAG is fitted with EOL (end of life) feature. This is the cause of that 4-5 seconds interval movement of seconds hand and thus indicating the time for battery replacement. The timekeeping is not affected by this- it is just warning to replace battery a.s.a.p.
Find your nearest watchmaker and ask for battery replacement.

Do not forget to rate, please.

Mar 11, 2009 | Tag Heuer WAF2110.BA0806 Aquaracer...

1 Answer

Tag automatic watch = stopped working


Stop shaking it!
You could try wearing it and it should wind itself with your body motion or...
your could manually wind it (setting 1)

Jan 22, 2009 | Tag Heuer WAF2110.BA0806 Aquaracer...

1 Answer

I have a question for tag heuer 2000 exclusive automatic


The battery power supply will last for two years and if you don't used nothing its happen to your watch..


Regards,
VOTIT

DON'T FORGET TO RATE

Aug 10, 2008 | Tag Heuer WAF2110.BA0806 Aquaracer...

1 Answer

My Aquaracer Automatic doesn't keep exact time


you bought a automatic watch, they are a quality time piece, not an acurate time piece. if you want acuacy buy a cheap quartz watch.

Apr 07, 2008 | Tag Heuer WAF2110.BA0806 Aquaracer...

Not finding what you are looking for?
Watches Logo

Related Topics:

66 people viewed this question

Ask a Question

Usually answered in minutes!

Top Tag Heuer Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Janelle Schoonover
Janelle Schoonover

Level 3 Expert

841 Answers

The Knight
The Knight

Level 3 Expert

76140 Answers

Are you a Tag Heuer Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...