Question about LG Refrigerators
This can be one three things,blown defrost element in the freezer,fault relay on the compressor or a faulty compressor
Posted on Feb 28, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
well i have the exact same refrigerator but opposite problem.... the freezer works but the entire refridgerator is a freezer....why is the fridge part freezing everything. This appeared to happen after the power went out and the entire fridge is a freezer now.
Posted on Dec 18, 2009
Look at the top and bottom of the door. There should be two holes near the edge. If there is then you just remove the hinges by the screws and place them on the other side of the fridge and flip the door over. At that point your shelves should be able to be flipped also. But if the manual does not say anything then your doors may not be able to be switched
Posted on Jan 02, 2010
I have the same problem.It seems that the gasket around the freezer door and fridge door are no longer tightly adhering to the fridge therefore allowing the cool air from the freezer to continiuously entering the fridge storage and making evreything freeze up. I am trying to find out if I can purchase new gaskets and install them myself.
Any recommendation on where to find these and how to install them?
Posted on Jan 07, 2011
SOURCE: I NEED TO SWOP THE
Hi there, you don't state the model number in your post but if you go to this link
http://www.lg.com/us/support/product/support-product.jsp and select the help by chat icon on the top left I am sure you will be able to get LG to email you a copy.
Posted on May 04, 2011
Tips for a great answer:
Jun 03, 2017 | LG Refrigerators
Mar 24, 2013 | Refrigerators
Please check the link :
If there is no cooling at all on the fridge section but the freezer works then it is confirmed that the compressor and gas pressure is OK. Now shut off the fridge and leave it powered off while you clean and check the evaporator for frost. If frost is seen it is a good indication as the compressor is working with sufficient gas within.
Now after about 6 hours plug in the fridge to start. Observe cooling to happen in about one hour and ice to from under three hours.
Earlier make sure that the thermostat was set to normal mode for freezer and fridge.
However if ice forms in the freezer then observe the fridge for about 24 hours for cooling to continue and the fridge to cut off . If not the auto defrost timer, or the thermostat must be checked. Frost formation without defrosting could block the air flow and so shut the air passage to the fridge. Also the blower fan must work and if this is not working then the fan can be faulty. Also a fault on the control unit is a suspect to non functioning of any one of these components.
If defrost timer works but frost keeps forming check while the compressor shuts if the heaters are working, check continuity of the heaters.
So try this test using a multi-meter on the defrost timer and the thermostat and make your observations so that we come to the solution.
Please check the link below for tips to remove the panels/parts:
Jul 19, 2011 | Refrigerators
May 04, 2011 | Refrigerators
Jan 02, 2010 | LG (LRBC22522ST) Stainless Steel
Jun 22, 2009 | LG Refrigerators
Jun 17, 2009 | LG LFD25860
Mar 02, 2009 | LG LFD25860
Mar 21, 2008 | Refrigerators
Jul 23, 2019 | LG Refrigerators
50 people viewed this question
Usually answered in minutes!