Question about Midland Radio Communications

Open Question

I have midland 13-892 just need pin out on the mic

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
Mechanic688
  • 204 Answers

SOURCE: look for schematics for a midland cb

daniel, first off, I need a complete model number for the radio info. Midland only made about 40-50 different models over the years. The header calls for a 75-822 and you are asking for a ** 833. The beginning should be a 13 or 75,76,77,78. Let me know the # and i'll be able to get you the proper pinout.
Thanks,,, Mechanic

Posted on Mar 08, 2008

Ad
  • 13 Answers

SOURCE: midland cb radio

NO. I SORRY. YOU COULD GET IT FROM THE MANUFACTUREE. THANK YOU

Posted on Sep 16, 2008

One Wire
  • 126 Answers

SOURCE: converting a different brand of mic for a midland CB

This should be a typical Midland pinout. If you are using a generic 4 pin mic that is wired to cobra/Uniden, all you have to do is switch pin 1 & 2, then 3 & 4.

Not all mics are color coded the same with their wires.

Posted on Oct 06, 2008

  • 1140 Answers

SOURCE: Does anybody know the wiring sequance that you

Its not in my area of expertise but maybe this link will have some info:http://www.dxzone.com/catalog/Technical_Reference/Mic_wiring/

Posted on Sep 01, 2009

  • 1274 Answers

SOURCE: NEED A MANUAL FOR A MIDLAND CB MODEL 77-805,AND A MIC

You can download it at www.cbtricks.com ....hope this was helpful...

Posted on May 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need manual for midland 76-858


af818583-6916-44e4-86a4-deeea2e2b2a0.jpg
here is the pin outs.. look at the switch in the mic handheld housing.. and attach as the one shown for midland 4 pin. this will work with any radio. and doesn't matter which color is what.. as long as the wire on the switch matches the wire on the pin correctly.

Aug 01, 2014 | Midland 1001Z 40-Channels Base CB Radio

2 Answers

I have a Midland CB Car with no mike or a car power pluge, the model # is 70 - 336B and the serial # is 760408


Your midland CB will use a standard 4 pin wired CB plug which is most common for most mics sold today. Your power cord will be a standard 3 pin CB power cord which again is most common with CB's today. You need not purchase a "radio specific" cord or mic. Cobra, Uniden, Midland all the same mic pin out and power cords. Good luck.

Feb 09, 2011 | Radio Communications

2 Answers

Need a mic for a midland 79-892 SSB Radio or at least the 6 pin mic plug


Because the radio has controls for the clarifier on the mic, there is an extra wire to have the control in the mic. This is why the radio uses a six pin mic but it is an offset pin spacing. This is an extremely tough mic connector to find and the radio is getting pretty old.
I have on several radios strapped the RF gain and used this knob as the clarifier and installed a five pin mic connector in the radio and it's mate on the mic. Not a job for those who are not used to doing this! But the radio is worth the repair as it is a good one! Email me at.... poikaa@yahoo.com

Feb 12, 2010 | Midland Radio Communications

1 Answer

Converting a different brand of mic for a midland CB


This should be a typical Midland pinout. If you are using a generic 4 pin mic that is wired to cobra/Uniden, all you have to do is switch pin 1 & 2, then 3 & 4.

Not all mics are color coded the same with their wires.

Oct 06, 2008 | Midland 1001Z 40-Channels Base CB Radio

2 Answers

"squeak" when transmitting


Make sure you have a good ground for the radio and antenna. How long is the antenna coax if a little to long and you have extra what did you do with it coil it if so uncoil it and lay it out try it. If no luck I would shorten the coax and recheck your SWR.

Jun 22, 2007 | Midland 1001Z 40-Channels Base CB Radio

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

42 people viewed this question

Ask a Question

Usually answered in minutes!

Top Midland Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1655 Answers

Gene Pitts

Level 2 Expert

159 Answers

Brad Brown

Level 3 Expert

18108 Answers

Are you a Midland Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...