Question about Panasonic Televison & Video

1 Answer

Panasonic tcp 50s30 replaced all 5 baords and still 7 blinks

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Panasonic Master
  • 76,060 Answers

Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://homenol.blogspot.com/
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "brand name" of your device, [Exclude the model number] in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.
{View the site in web view or by a desktop to see the search box. Mobile view has no search box.}

Counting the number of blinks of Philips TVs is entirely different to that of other brand TVs. It is not a direct count procedure. The site have details about how to count the number of LED blinks [Fault Codes] to Philips brand TVs are given; along with details of the faulty circuit location.

Posted on Mar 24, 2019

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 910 Answers

SOURCE: How do I connect the SC-BT228 Home theater to my

You need a Digital Audio Cable connected as shown below from your SC-BT228 Manual.

andys_elec_0.jpg
Full setting details for the SC-BT228 Digital Audio In & TC-P50S30 Digital Audio Out are within the Manuals which can be downloaded from Panasonic at the following link.

http://www2.panasonic.com/consumer-electronics/support/

Please leave feedback.

Cheers

Andy

Posted on May 15, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Panasonic PT-50DL54 problems


there actually was a class action law suit on these tv's due to the bulbs.
1 | Load Shortage
2 | Over Volage
3 | Fan Sos
4 | Main 3.3v
5 | Lamp Disable
6 | Gc3fm-Iic
7 | Gc3fs-Iic
8 | Gc3i-Iic
9 | Color Wheel Stop
there is the list of codes so yours is 7. Hope this helps.
Keep me posted.
Thanks,
Lee

Jul 21, 2008 | Panasonic PT-50DL54 50" Rear Projection...

1 Answer

TH50PX60U


5 blinks is caused by the D baord according to the manual. You can get the replacement D board from www.tvrepairworld.com

Oct 18, 2012 | Panasonic TH-50PX60U 50 in. Plasma HDTV

1 Answer

How do I connect the SC-BT228 Home theater to my new 50" Panasonic Plasma TCP-50S30 so that I can use the home theater speakers for both TV and Disc player?


You need a Digital Audio Cable connected as shown below from your SC-BT228 Manual.

andys_elec_0.jpg
Full setting details for the SC-BT228 Digital Audio In & TC-P50S30 Digital Audio Out are within the Manuals which can be downloaded from Panasonic at the following link.

http://www2.panasonic.com/consumer-electronics/support/

Please leave feedback.

Cheers

Andy

May 15, 2011 | Panasonic SCBT230 Theater System

1 Answer

Power indicator light blinks-7 times. will a new power supply fix it


Physically disconnect the SU board and the SD board. (See precaution # 5)

Plug in the TV and turn it on.

Does the TV shut down and the power LED

blink 7 times?

Yes

No

Replace the Panel and the SU board.

(See precaution #3)

Reconnect the SD board only.

(See precaution # 5)

Plug in the TV and turn it on.

Yes

No

With the SU board and the SD board still disconnected, remove connectors SC2 and SC20 from the SC board (See precaution # 6)

Plug in the TV and turn it on.

Disconnect the SD board and reconnect the SU board. (See precaution # 5)

Plug in the TV and turn it on.

Yes

No

Replace the Panel, SD, and SU board.

(See precaution #3)

Replace the Panel and the SD board.

(See precaution #3)

Replace the SC board.

(See precaution #3)

No

Replace the D board.

(See precaution #3)

Does the TV shut down and the power LED

blink 7 times?

Does the TV shut down and the power LED

blink 7 times?

Does the TV shut down and the power LED
blink 7
There is a sequence that you have to check to figure out which board is bad,

Feb 16, 2011 | Panasonic TH-42PZ700U 42 in. Plasma...

1 Answer

Picture went out and no audio, red light on power blinks seven times and repeats.


Physically disconnect the SU board and the SD board. (See precaution # 5)

Plug in the TV and turn it on.

Does the TV shut down and the power LED

blink 7 times?

Yes

No

Replace the Panel and the SU board.

(See precaution #3)

Reconnect the SD board only.

(See precaution # 5)

Plug in the TV and turn it on.

Yes

No

With the SU board and the SD board still disconnected, remove connectors SC2 and SC20 from the SC board (See precaution # 6)

Plug in the TV and turn it on.

Disconnect the SD board and reconnect the SU board. (See precaution # 5)

Plug in the TV and turn it on.

Yes

No

Replace the Panel, SD, and SU board.

(See precaution #3)

Replace the Panel and the SD board.

(See precaution #3)

Replace the SC board.

(See precaution #3)

No

Replace the D board.

(See precaution #3)

Does the TV shut down and the power LED

blink 7 times?

Does the TV shut down and the power LED
blink 7 times?

Feb 15, 2011 | Panasonic TH-42PZ700U 42 in. Plasma...

2 Answers

TV will not turn on. Power light blinks 7 times, then pauses, blinks 7 times again. What could the problem be?


If you are a DIY then you will need to try to unplug the SD board and reconnect and try again, if it stills shutdown with 7 blinks then the SD board is bad and maybe the

Physically disconnect the SU board and the SD board. (See precaution # 5)

Plug in the TV and turn it on.

Does the TV shut down and the power LED

blink 7 times?

Yes

No

Replace the Panel and the SU board.

(See precaution #3)

Reconnect the SD board only.

(See precaution # 5)

Plug in the TV and turn it on.

Yes

No

With the SU board and the SD board still disconnected, remove connectors SC2 and SC20 from the SC board (See precaution # 6)

Plug in the TV and turn it on.

Disconnect the SD board and reconnect the SU board. (See precaution # 5)

Plug in the TV and turn it on.

Yes

No

Replace the Panel, SD, and SU board.

(See precaution #3)

Replace the Panel and the SD board.

(See precaution #3)

Replace the SC board.

(See precaution #3)

No

Replace the D board.

(See precaution #3)

Does the TV shut down and the power LED

blink 7 times?

Does the TV shut down and the power LED
blink 7 times?

Jan 11, 2011 | Panasonic TH-37PX50U 37 in. HD-Ready...

2 Answers

My TV just turned off and the power light flashes 8 times. what is the flash code for 8 times on a panasonic TC-50PS14


thought I would post this here for everyone.

1 blink STV 5v sense DG Board

2 blinks 15v SOS D Board

3 blinks 3.3v SOS D Board

4 blinks Power SOS P Board

5 blinks 5v SOS D Board

6 blinks Driver SOS 1 SU / SD / SC Boards
(SC energy recovery circuit)

7 blinks Driver SOS 2 SU / SD / SS Boards
(SC floating voltage area)

8 blinks Driver SOS 3 SS Board
(SS energy recovery circuit)

9 blinks Panel Config. SOS

10 blinks Sub 5v SOS / Main 3v SOS DG Board
DTV 9v SOS / Tuner Power SOS

11 blinks Fan SOS PB Board

12 blinks Sound SOS H Board

13 blinks Communication error DG Board
with IC8001 (Pesks Lite 2)

May 14, 2010 | Panasonic Televison & Video

1 Answer

My Panasonic PT-52LCX66 worked for about a week after changing the lamp. Now it won't turn on. 3 orange power blinks and 4 red temp blinks. Please help! My husband is to hard to babysit without a TV :)


Three orange power blinks indicates a 'Malfunction 5', and that your unit requires servicing. You can try pressing POWER on the unit for over 7 seconds, and then turning the set back on after 5 more seconds. If this doesn't help the set needs servicing.

If you didn't reset the lamp timer after replacing it, you might try that by following these steps.

If you think browsing the troubleshooting section of your operating manual may help, you can access it here.

I hope that helps.

Mar 31, 2010 | Panasonic PT-52LCX66 Projection Television

1 Answer

Panasonic TH42PZ70B


Flashing RED lights in Panasonic TVs means a fatal error code. Unplug the TV, wait 1 minute and replug. If the LED still flashes it needs professional service.

Sep 04, 2008 | Panasonic TH-42PA20U/P 42 in. Plasma EDTV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

61 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5686 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

512 Answers

The Knight
The Knight

Level 3 Expert

76060 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...