Question about Husqvarna Sewing Machines
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
1. Did the software come with a dongle? This is a "key" that looks like a memory stick, that is actually a copyright protection device. You cannot access the program without it. To get the program to recognize it. plug it into a free USB Port, then power up your computer. It will read the dongle as a new device and install it on your computer. Always make sure the dongle is plugged into the same USB port as when its installation.
2. Check the operating system compatibility of your embroidery software and your computer.
What is your computer's OS? If you have Vista, it will not read Win95-XP. In that case, you may need to find a used computer to dedicate to your embroidery and install Win 98. I have XP 2000 and it reads all the Win programs back through 95.
My Husqvarna Rose/3D Embroidery Studio, will not operate with the Vista program. It will run on XP, because XP is backward compatible to previous Windows programs.
If this is the problem, you can still purchase older Windows programs very affordably. Before installing it on your hard drive, I would get expert instructions from a professional, who would back up your hard drive. I've also heard of people partitioning their hard drives, so that they could use more than one operating system.
(This is MUCH CHEAPER than purchasing a new machine and all the software, etc to go with.)
Just a note: The small notebooks they've come out with, do not have the proper drive to run your embroidery program.
3. If you have the reader'writer that came with the machine and no serial port on your computer or printer, you can take the box to your local Radio Shack or computer repair, where you can get an adapter with a serial plug on one end and a USB plug on the other, or get the "Ultimate Box Plus". The adapter is cheaper.
One, or all, of these little tidbits may fit your problem.
Hope this helps.
Posted on Aug 20, 2009
Dls8864's suggestion was a very good suggestion - make sure the metal stitch plate is pushed all the way to the back. Also make sure that the thread is feeding freely - if it is catching on something it can cause the needle to be pulled aside and make it break. Does the design fit properly inside the hoop you are using? If the foot and/or needle strike against the side of the hoop, that will cause a breakage. Is the bobbin thread okay - not making a bird's nest underneath?
Posted on Feb 01, 2010
I found this download for $5.00 - http://gotoes.org/sales/VikingSewingMachineManuals/ViewInfo.pl?Viking=1&Sewing_Machine_Model=6440
Posted on Feb 25, 2010
Could the part number be 4011770? I've found the Viking 7 bobbins here: http://www.mysewingmachineparts.com/top-quality-metal-sewing-machine-bobbins-4011770-husqvarna-viking/ . Another site with them is http://www.sewingpartsonline.com/bobbin-viking-4011770.aspx . This bobbin is compatible with the Husqvarna Viking 7, 49, 51, 52, 21 & 21E . It probably will work for other machines. Sears also has them listed as 11770: http://www.sears.com/generic-viking-sewing-machine-bobbins-sewing-machine/p-SPM6124767105?prdNo=1&blockNo=1&blockType=G1 .
I also found these bobbins: http://www.amazon.com/Viking-Metal-Bobbins-5-pkg/dp/B000YZ5QSC . The part number appears to be 1702.
I hope this helps.
(googling Husqvarna Viking metal bobbins found a number of hits.)
Posted on Mar 05, 2013
Posted on May 17, 2014
Tips for a great answer:
Jun 30, 2018 | Husqvarna Sewing Machines
Mar 26, 2015 | Husqvarna Sewing Machines
Feb 28, 2015 | Husqvarna Sewing Machines
Mar 05, 2013 | Husqvarna Viking 1
Jan 20, 2013 | Husqvarna Sewing Machines
Jan 26, 2010 | Husqvarna Viking 1
Oct 24, 2008 | Husqvarna Sewing Machines
Apr 14, 2008 | Husqvarna Viking 1
31 people viewed this question
Usually answered in minutes!