Question about Jandy Pool & Spa

Open Question

My jandy flopro keypad is locked. I tried holding up and down arrows for 5 sec. the lights come on but it still stays locked. Do i push something next or is there an alterative way to unlock it?

Posted by on

Ad

6 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 1 Answer

SOURCE: microwave keypad is locked

Touch and hold START more
than 4 seconds. "L" will
disappear and you hear two
beeps. At this time the oven is
ready.

Posted on Aug 23, 2008

Ad

Anonymous

  • 57 Answers

SOURCE: emachine T3504 monitor controls locked out

The problem is not one easy... The IC with controls system is down... sorry but u must go to an expert to fix the bug! Rate me if this help's you Thanks!

Posted on Sep 14, 2009

wayneard

Wayne Mineard

  • 1901 Answers

SOURCE: down arrow in lock symbol on keyboard. what is

That would be the Scroll Lock. Do you have a Scroll Lock key? Press it.

Thanks for using Fixya.

Posted on Oct 06, 2009

VtToolMan

Mark

  • 704 Answers

SOURCE: Can't start the dishwasher, lock button is lit up.

Hello Albert, On the Jenn-Air dishwasher you have, you have to hold down the "Heated Dry" button for 3-5 seconds to unlock the control panel.

This should unlock the controls so you can again use the dishwasher normally.

Since you''re likely going to have this dishwasher for some time, I've included a link where you can download a free owner's manual for it.

I would print out a copy for your future use and reference. I also have a file on my computer that I title "Home Appliances and Equipment" which is where I download and save an electronic copy so I always have a backup copy saved, since manuals aren't always readily available on the web, as the appliances get older.

http://www.jennair.com/assets/product/6_920374_A.PDF

The info on locking and unlocking the dishwasher can be found on page 13 of the manual.

I hope you find this Very Helpful and best regards!

Posted on Nov 23, 2009

Testimonial: "Thanks for the detailed info about my question, VtToolMan, I greatly appreciate it. However, I tried to unlock it that way, but it didn't work. "

bob_computer

Project NOMAD

  • 3153 Answers

SOURCE: Dell D620 power light comes on when pushed but goes out 5 sec lat

There are two common causes for this and both relate to the power supply.

First is that the connector on the main board is loose or has a bad connection

If you are proficient with a soldering iron this is an easy fix for approx $10

http://www.insidemylaptop.com/category/4-dell-laptops/

They have some very good step by step guides for replacing power sockets.

It could also be a dying power supply which is the second most common cause.

Replacements are easy to obtain and cost between $20 to $60.
If it is the PSU either get an original replacement (EBAY is best bet) or get one of the many multi laptop PSU's available but if you get the latter please make sure it carries enough or preferably MORE amperage than you need.

The old supply will have the details of both the voltage and current on it and you need to match the voltage exactly and keep the same or better current rating eg 1000 Mw or 1A or whatever it says.

Bob

Posted on Jul 31, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Wiring diagram for jandy flopro pump


look on side of motor for low or high wiring

Jun 21, 2012 | Jandy Flopro Medium Head 2hp Up-rated...

3 Answers

Oven Door panel is showing LOC position but can be opened and closed so not locked. Unable to use oven for cooking


What is the exact make and model of your oven? Unplug the power cord for one hour to reset the display

Mar 18, 2010 | Kitchen Ranges

2 Answers

I programmed 2 new remotes with no issue but, cannot get the remote keypad to reprogram (we just bought the home and don't know the existing code) the model for the garage door opener is Chamberlain...


Your keypad may be bad. If you press and immediately release the smart/learn button and then key in your 4 digit code and press enter the keypad should be working. Be sure you have a good battery. Actually the flashing of the keypad is indicating that it is sending the signal to the receiver. Holding the enter button in doesn't do anything extra.

Nov 30, 2009 | Sears Craftsman LiftMaster Chamberlain...

1 Answer

I can't remember how to get the green light for my saltwater generator going and i can't find the intructions. don't remember how to get it going.


Unlock the keypad by pressing and holding the "down arrow" for 5-seconds until you hear a long beep and then the "up arrow" for 5-seconds until you hear a long beep.

Set the number of hours you want it to run by adjusting the time display using the "up arrow" or "down arrow" until you have the correct number of hours.

After setting the time re-lock the keypad by pressing and holding the "down arrow" for 5-seconds until you hear a long beep and then the "up arrow" for 5-seconds until you hear a long beep? Several minutes later the Green LED should come on indicating the cycle has started.

Jul 08, 2009 | Intex Automatic Salt Water System for ...

1 Answer

I can't get the (Intex) salt generator to time set. It just stays on 88.


Did you attempt to unlock the keypad before trying to set the time? In case you didn't, these would be the proper steps:

Unlock the keypad by pressing and holding the "down arrow" for 5-seconds until you hear a long beep and then the "up arrow" for 5-seconds until you hear a long beep.

Set the number of hours you want it to run by adjusting the time display using the "up arrow" or "down arrow" until you have the correct number of hours.

After setting the time re-lock the keypad by pressing and holding the "down arrow" for 5-seconds until you hear a long beep and then the "up arrow" for 5-seconds until you hear a long beep. Several minutes later the Green LED should come on indicating the cycle has started.

Jul 06, 2009 | Intex Automatic Salt Water System for ...

4 Answers

Changed water filter red light stays on


Afer you change the filter and have run the water for about 1 minute you then hold down the light & lock button together and this should turn the change filter light off.

Apr 23, 2009 | Refrigerators

1 Answer

Remote key will not open door


hi, gareth hear
i think this mite work 4 u

get in your car and put key in ignition turn 1 turn then wait approx 15 20 secs for light in clock to go red then take key out light should stay lit, next get out of your car close door then lock it and open it, when u open car light in clock should flash 3 times, next get out of car hold lock button on your remote down and push open button 3 times (keeping lock button down and remote pointed at reciver) next lose go of both buttons and red light on key should flash 3 times at the same time as clock inside the car.
next get in your car with key! then start her up and turn off get out of car close door and push button to lock (it should lock) if not get back in start her up again and turn off, then push the door locks inside the car then open get out and your car will lock this time!!!!!!!

this will work 4 u!!!

good luck

Dec 14, 2008 | Code-Alarm Code Alarm Transponder

1 Answer

I don't understand..


button on front control panel has a lock emblem underneath it or on some models has a button marked" hold 3 sec to lock controls " hold button down untill control lock light goes out

Jul 22, 2008 | Whirlpool GEW9250 Electric Dryer

1 Answer

Whirlpool duet washer - light islit that says control locked. How do I unlock to start the wash?


There should be a button with an icon that looks like a padlock next to it, it might be a button that does something else as well. Push and hold for 5 sec. to lock or unlock.

Jul 21, 2008 | Whirlpool Washing Machines

1 Answer

Cant on my coby MPC-7085


first just charge it before you go to sleep and dwhen you wake up the next day check....dont ever reset it because all the settings reset also which means the light on the keypad may not work to make light on the keypad...turn it on...scroll down to setup..click it and scrol down to display,,,click that then click backlight and put how many seconds you want it to stay on...mine is 11 sec.(the thing is from 3sec-11sec.)

May 25, 2008 | Coby MP-C7085 MP3 Player

Not finding what you are looking for?
Pool & Spa Logo

Related Topics:

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jandy Pool & Spa Experts

David Spradling
David Spradling

Level 3 Expert

10371 Answers

Bill Jordan

Level 2 Expert

375 Answers

Steve Slater

Level 2 Expert

72 Answers

Are you a Jandy Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...