Question about Insignia Televison & Video

1 Answer

Hi, I have a 50 inch insignia lcd tv NS-50D55ONA15 The backlight is barely visible, really really dim. Happened all of a sudden. Still have sound. From your videos i was thinking its the Inverter board, but the part i looked up says "main board" I am not sure which part i need to order. I looked up number 174474 on a parts on shopjimmy.com list. IS that the one i need to restore the picture?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Insignia Master
  • 76,060 Answers

Sounds like source board problem. If you wish to get some details; visit the sites linked here. Pull up older posts.
https://electronicshelponline.blogspot.com/
http://homenol.blogspot.com/
Faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent. Search the site by type in the "BRAND NAME" of your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.
{View the site in web view by mobile or a desktop to see the search box. Mobile view has no search box.}

Posted on May 17, 2019

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 2337 Answers

SOURCE: Insignia NS-32LCD Backlight or Inverter bad???

If you've done the flash light test, it could be the inverter board became defective but it could also be that the power supply does not provide the +24VDC to the back light inverter board.
If you could do the +24VDC test using a voltmeter then we can say for sure that the back light inverter board is defective.
Let me know if you need further assistance.

Posted on Aug 21, 2008

  • 66 Answers

SOURCE: Westinghouse LCD tv LTV-32W4 has great sound but no picture.

Your television actually has a backlight bulb which can be replaced at our parts request email and phone number. Email address: Parts@wde.com. (866) 839-5888

Posted on Jul 29, 2009

  • 1 Answer

SOURCE: part number for the samsung le52m87bd backlight inverter

Hey!

I also have a SAMSUNG LE52M87 LCD TV and I have the same
ANOYING BUZZ comming from ( I think ) backlight converter. - I am
almost 100% that its because of the backlight inverter while the sound shifts frequency when backlight is changed ( from 1 - 10 ), but the volume of the buzz stays the same. Only the tone changes. I have this TV for a year now and havent realy noticed until now, so I think it started buzzing recently, because I didnt hear it before ( and I got realy sensitive hearing :) ) ...

ITS DRIVING ME CRAZY ...

PLEASE post what happened when ( if ) you changed the inverter,
or what did you do to solve the problem ...

Many thanks in advance!

Eddie from Slovenia

my email: Ldesign.marketing@gmail.com


Posted on Jan 08, 2010

BoiseLCD
  • 63 Answers

SOURCE: I have a NS-LCD37-09 tv. No picture or backlight

Your main board is faulty. I've done several of these but haven't been able to figure out which component is actually bad these yet. I've simply had to replace the board itself, and it fixes it every time. One thing you can do to get your backlights to come on (and so you know I'm not Jive'n you) Is unplug the three wire bundle that spans from power supply to main board. This will usually make the backlights fire up. I even had one that after I left it that way for a minute (with the backlight on) it suddenly started working again! But this was short lived. :-(
One time I even tried recapping the entire main to see it that would fix it. It did not. I think it might be something to do with the small chip labeled SL37HA37. It's a 16 legged bastard near the 3-wire plug I told you to pull. It's that or possibly the bigger IC near it that has a heat sink on it. The ball grid array solder joints may be faulty. Just guesses, if any smart guys out there figure this one out, be sure to tell the rest of us please!
Thanks, Chris Boise LCD www.boiselcd.com

Posted on Apr 23, 2010

futurework
  • 70 Answers

SOURCE: insignia ns-pdp50 plasma. pop of death, audio but no video

I suspect that your supply has gone bad. You will need to find the service manual for voltage measurements. If you want to get replacement boards many can be found on ebay or you can check www.shopjimmy.com they stock boards for many units and I have had no problems.

Posted on May 04, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have an Insignia NS-39L700A12 LCD TV that suddenly stopped working.


either wire came off board inside or bad video board or transformer

Aug 13, 2018 | Insignia Televison & Video

1 Answer

I have a insignia model#ns-50d40sna14 50"led.the picture went out on me but have sound.


in 90% of cases this is the fault of the backlight led, can only be repaired at a specialist service

Oct 09, 2017 | Insignia Televison & Video

1 Answer

I have a new insignia 55 1080p led tv . What is the best picture settings?


Personaly I think these settings are the best for the insignia
Contrast: 38
Brightness: 50
Sharpness: -50
Color: 45
Tint: G3
Backlight: 3


Jul 25, 2011 | Insignia NS-P502Q-10A 50 in. HD-Ready...

1 Answer

55" LCD TV NS-L55X-10A HOW


hopefully your backlight isnt going out. but it sounds like you need to reset your saturation and coloring its in the menu feature also check your contrast settings. let me know if this helped.

Mar 17, 2011 | Insignia Televison & Video

1 Answer

My lightning got really dark and i can barely see anything,i have to put the frame really up close to see a little bit.im not sure why it got like that.need help


LCD screens have a backlight. When the backlight starts to dim it will eventually completely fail, causing the image to be really dark, barely viewable. You will need to replace the LCD screen, or replace the entire unit.

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

Feb 17, 2011 | Philips 6.5-Inch Digital Photo Frame...

1 Answer

Tv picture will not come on


We need to find out if the power supply is putting out 24vdc for the backlight inverter board and 12~16vdc for sound, look for bad caps with leaking/bulging tops first. If you do have all the voltages then the backlight inverter board may be bad.
http://s807.photobucket.com/home/budm/allalbums
http://en.wikipedia.org/wiki/Capacitor_plague
http://www.badcaps.net

Parts: http://www.shopjimmy.com/catalogsearch/result/?q=Insignia+NS-L32Q-10A+

Jun 14, 2010 | Insignia NS-L32Q-10A 32 in. HD-Ready LCD...

1 Answer

Was told need new lcd panel for insignia 42 inch lcd tv


buy lcd panel for insignia 42 inch lcd tv

er~

you can visit the :http://www.udtek.com/lcd-panel-c-9.html

hope it can give your some help

Feb 25, 2010 | Insignia NS-L322Q-10A LCD TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Insignia Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76060 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Cindy Wells

Level 3 Expert

5913 Answers

Are you an Insignia Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...