Question about Bell Televison & Video

1 Answer

How do I program my Bell remote . so Ican turn the system and the tv off with it?

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Bell Master
  • 76,060 Answers

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. The site has set-up code list & set-up procedure to many popular brand remote controls. The site has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Set-up code list to many brand remote controls also is given. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.
http://homenol.blogspot.com/
http://remotesearch.blogspot.com/
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/
Programming Notes
• If your device does not respond to the remote after trying all codes listed or your brand is not listed in the code list, use the Auto Code Search method to program your remote.
• Sometimes the first code that "works" with your device may operate only a few functions of your device. There may be another code in the code list that performs more functions. Try other codes from the code list for more functionality.

This is a trial and error procedure; and quiet time consuming. You might have to check different codes said for your device.
Search the site by type in the "brand name" to your device; to which you want set-up codes; in the "Search box at the top right of the display window" to get gathered related posts.
{View the site in web view by Mobile or a desktop to see the search box. Mobile view has no search box.}

Posted on May 17, 2019

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: program bell sat remote for insigna tv

where can I find a manual for a Daewoo model DV-T5DN

Posted on Feb 01, 2009

  • 1 Answer

SOURCE: Program bell expressvu remote for new tv

The easiest way is to do device code scan. Since you want to program the TV, hold the TV button on your bell expressvu remote. When all the top buttons light up, press the power button, the TV button light should remain lit. Keep pressing up/down until your TV turns off. When your TV turns off, press the # button. Thats all. Your done.

If you want to set up the AUX button, hold the AUX button until all the buttons light up. Then press * and either

0 - second TV
1 - second VCR/DVD player
2 - audio amplifier or cable box

Then press the power button and press up/down until the device turns off. The last step is to press # and your done.

Posted on Feb 05, 2009

  • 24 Answers

SOURCE: bell express vu remote codes for soyo tv

1 - Hold the clear tv buttom until all 4 light flash red
2- Press the red tv buttom
3- Press the amount of time needed on the up cursor ( around select buttom) until your tv shut down
4-When the tv goes off press the search buttom ( at the end on the right side )
5-Press record

Then u can use the red tv buttom to control ur tv and u can control the volume on satelitte mode without going back to tv mode , if u press too much time while searching the code and the tv wont light back , do the same thing but instead pressing the up cursor press the down one to go back on the code it will be faster .

Posted on Feb 25, 2009

  • 1 Answer

SOURCE: Cannot program tv using bell satellite remote

Turn your TV on.
Press and hold the TV mode button until all the other mode buttons light up.
Press the blank POWER button. (If your remote only has one POWER button, press that one)
Press the UP ARROW button repeatedly until your TV turns off.
Press the POUND (#) button to confirm.


Cheers

Posted on Apr 01, 2009

  • 29 Answers

SOURCE: program bell remote to emerson tv

Hi try this
Emerson 526, 534, 536, 541, 573, 590,
627, 636, 642, 648, 652, 654,
655, 657, 658, 659, 660, 661,
662, 665, 666, 667, 669, 670,
677, 679, 682, 692, 696, 699,
720
http://www.bell.ca/web/tv/en/all_regions/pdfs/deviceCodes.pdf

good luck please rate

Posted on Dec 18, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have RCA RLDED5099 Tv, but can't program it to work with my Bell satellite remote so I can then work My JVC THA35 home theatre..


Bell Satellite remote codes for RCA TVs: : 001,005,006,008,012,014,015,018,023,
025,035,066,077,085,121,124,131,133,135,
144,148,150,151,152,155,160,167,190,194,
222,223,225,227,232,236,245,248,268,269,
282,288,289,317,431,486, 492

Instructions for when the code for your device is not listed. Use this procedure to scan the remote control’s memory for the device code


1. Turn the device on (TV).
2. Press and hold the mode button until all the other mode buttons light up, and then let go of the button. The mode button flashes.
3. Press POWER.
4. Press the UP or DOWN ARROW repeatedly until the device turns off.
5. Press POUND (#).
6 .Turn the device back on and try some other buttons to make sure they work
7. If necessary, repeat this procedure

How to program my Bell Satellite TV remote control

Apr 09, 2015 | RCA Televison & Video

1 Answer

Get my dish reciever, sony home theatre, and 55in sanyo tv to work together


If your TV and sound system both have a Digital Optical Out/In you can use a TOSLink cable (an optical cable) to connect your TV directly to your sound system, and remove the connection between the DISH receiver and the sound system. As long as your sound system is on the right input, all sound accompanying the picture on screen will go to your sound system. Most TVs also have an option to turn off the internal speakers, if not just reduce your volume all the way down to avoid that weird ghost sound effect. If you use your sound system all the time for volume, you can program the sound system to your DISH remote's AUX, and even set the remote so that it only sends volume and mute commands to the sound system (that way you don't have to dance between sat, tv, and aux all day, just leave it in sat mode).

To program your remote to the sound system, follow the instructions on the sheet you got with the remote (yeah, right like anyone kept that) http://www.mydish.com/support/remotecodes you can use that link to program your remote. You can also use the learning mode if your remote has a little glossy square on the top left side and you have the original remote to the sound system. (Learning mode can be gleaned from the remote manual Remote Control Manuals)

After programming the aux device, and verifying that it changes the volume up, down, and mute, THEN:

Hold AUX until light blinks 3 times, hit pound (#), Volume Up, 0 (Zero), pound (#), SAT, then test to make sure it goes up and down.

Sep 24, 2014 | DISH Network Televison & Video

1 Answer

Tv codes


I am assuming you are using the bell Fibe TV system. The best option to program the TV code onto the remote control is to go to this site and select the remove control you have.
http://support.bell.ca/Fibe_TV/Receivers/How_to_program_my_Bell_Fibe_TV_remote_control

You will then need to find out what code applies to your TV as you have not provided the make and model for it.

Aug 29, 2014 | Televison & Video

1 Answer

My old Bell receiver 's remote was an IR Remote. How do I program the new UHF PRO Bell remote?


mikecrans175

I have provided the instructions on how to program your remote to your TV and addressing the remote to your receiver below. I hope this helps.

Remotes: Basic (Television Only)
  1. Turn the Television On.
  2. Press and Hold the TV Power button for three seconds until the LED flashes.
  3. Enter the three-digit code using the buttons on the number pad.
  4. Press OK. Note: The LED will flash three times.
  5. Test functionality with the TV.
  6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.
Remote:
  1. Go to System Info screen.
  2. Hold down the SAT button until all mode lights light up.
  3. Enter a number between 1 and 15 using the numeric keypad on the remote.
  4. Press the pound (#) button.
  5. Once the SAT button blinks three times, press record. Note: If successful, the number selected in step 3 will appear in the System Info screen under Remote Address.
Ray Calo
DISH Network


.

Mar 14, 2011 | DISH Network IR Remote Control

2 Answers

We just got a new Dish HD/DVR Receiver and need the remote code for the Bose remote control to operate it.


Here is what I did for my Bose Solo Tv to work on the Bell 9242 receiver.( see page 17 of Bell 9242 guide) 1. Hold down the aux button until all lights flash. 2. Press 2 to ensure Aux is set to audio. 3.Enter code 761 and press the pound (#) button. Now to have the satellite remote default volume to Bose Solo do the following. 1.Press and hold AUX 2.press # pound 3. Press the + side of volume 4. Press 0 5. Press pound ( AUX button will flash 3 times) 6. Press SAT mode 7. Test the volume on Bose Solo. (see page 22 of Bell 9242 guide)

Jul 05, 2010 | Bose 3 2 1 GSX System

1 Answer

Program bell remote to emerson tv What codes do I use to program my bell satellite remote to be able to tun off/on tv and to use the volume from one remote


Hi try this
Emerson 526, 534, 536, 541, 573, 590,
627, 636, 642, 648, 652, 654,
655, 657, 658, 659, 660, 661,
662, 665, 666, 667, 669, 670,
677, 679, 682, 692, 696, 699,
720
http://www.bell.ca/web/tv/en/all_regions/pdfs/deviceCodes.pdf

good luck please rate

Dec 18, 2009 | Bell Televison & Video

2 Answers

What is the code for cable remote


Viore told me that they do not have a code that can be input into any remote. I have two Viore TV's... just bought my 2nd a few days ago. You will always have to use the Viore remote to power up or just turn off the cable instead. Not sure that turning off cable completely turns off the TV though.

Jul 31, 2009 | Digital Lifestyle FA1B32Z 32 in. LCD...

1 Answer

Cannot program tv using bell satellite remote


Turn your TV on.
Press and hold the TV mode button until all the other mode buttons light up.
Press the blank POWER button. (If your remote only has one POWER button, press that one)
Press the UP ARROW button repeatedly until your TV turns off.
Press the POUND (#) button to confirm.


Cheers

Feb 01, 2009 | Hitachi 50FX30B 50" Rear Projection...

1 Answer

Program bell expressvu remote for new tv


The easiest way is to do device code scan. Since you want to program the TV, hold the TV button on your bell expressvu remote. When all the top buttons light up, press the power button, the TV button light should remain lit. Keep pressing up/down until your TV turns off. When your TV turns off, press the # button. Thats all. Your done.

If you want to set up the AUX button, hold the AUX button until all the buttons light up. Then press * and either

0 - second TV
1 - second VCR/DVD player
2 - audio amplifier or cable box

Then press the power button and press up/down until the device turns off. The last step is to press # and your done.

Oct 22, 2007 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

45 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bell Televison & Video Experts

Marvin
Marvin

Level 3 Expert

85020 Answers

Andrew Taylor
Andrew Taylor

Level 3 Expert

27351 Answers

ray gallant
ray gallant

Level 3 Expert

63374 Answers

Are you a Bell Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...