Question about Cooktops
Posted by Anonymous on
Induction cook tops do not heat by convection... only the cook ware gets hot. Your cook ware has to be made or encapsulate ferrous materials. More simply put; if a magnet won't stick to the pot it won't work on an induction cook top.
Posted on Jun 09, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Initially, it could either be:
Hope this be of initial help/idea. Pls post back how things turned up or should you need additional information. Good luck and kind regards. Thank you for using FixYa.
Posted on Nov 11, 2008
It would seem you posted anew.
For some reason I could not locate related literature for a RCC3024LD01,although there are for LB01, LQ01 and a LT01. Most of the components inthese models could be checked with the use of a continuity tester(multitester VOM/DVM). The idea is to check for continuity of eachcomponent. If we are to assume that the heating element as a likelysuspect, it is a matter of checking if the coil is continuous, that isno break anywhere in between. The test prods of the continuity testerwould be applied to the two (2) terminals of the heating element andthe tester should deflect/display how much is the resistance. Normalreading shouold be pretty low while no deflection/reading indicates anopen coil and therefore would require replacement.
These additional documents may be of help to you:
Posted on Nov 11, 2008
SOURCE: Wolf electric induction stovetop
We had the same problem with the Wolf induction stovetop. They came out and changed out a part and have never had that problem again. They said there was a problem on all units that came out earlier this year (2008) so if you are one of those, you should call them and have them change that out. But... I am also very frustrated about the inability to fry things on this unit. I don't fry very oftehn but it gives very unsatisfactory results, constantly shutting the heat off and then back on. Hmmm yumm.... soggy rare ahi- uncrispy chicken- anybody?? HELP!
Posted on Nov 25, 2008
Tips for a great answer:
Thank you for your post, friend!
I located that on Electrolux Cooktop error codes "35" and "75" stand for input voltage too low. It could be an issue with your filter board or an issue within the voltages. I would recommend having a professional come out to your cooktop to properly diagnose to avoid any unnecessary part purchases. -Matt
Sep 20, 2014 | Frigidaire 36-Inch Smooth Surface...
Dec 20, 2013 | Electrolux 36" Electric Hybrid Induction...
Apr 21, 2013 | KitchenAid 36 in. Architect KGCP463KSS Gas...
You may try and reset the induction cook top by disconnecting the power to the unit for up to 30 seconds. This will clear most false error codes. You can disconnect power by flipping the circuit breaker off and back on. If the error code does not clear, then the unit more than likely can be experiencing an issue with the EOC and user interface board. This is not a typical do it yourself job; please consult a professional or your manufacturer.
Sep 11, 2012 | Electrolux 36" Electric Hybrid Induction...
Jun 23, 2012 | KitchenAid Kitchen Aid 36 In. Stainless...
Jul 25, 2011 | Kenmore 36 in.42741 / 42742 / 42744 /...
Jan 02, 2010 | GE Profile 36" Electric Induction Cooktop...
Jun 29, 2009 | Jenn-Air 30 in. CCE3401 Electric Cooktop
Mar 07, 2009 | Viking 37 in. VECU165 Electric Cooktop
28 people viewed this question
Usually answered in minutes!