Question about Husqvarna Sewing Machines

1 Answer

Hi iam after husqvarna viking emerald 203/183 motion foot for quilting

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Husqvarna Master
  • 5,960 Answers

This presser foot, https://www.sewingpartsonline.com/open-toe-free-motion-spring-foot-4130376-46.aspx , should be compatible with the Emerald 203 and 183 for free motion quilting. Additional Husqvarna Viking Emerald 2030 feet are listed here: https://www.sewingpartsonline.com/viking-emerald-203-sewing-machine-parts.aspx?filter.ptype_gmcfeed_1=%20Presser%20Feet&sort.ss_cat_sort=desc&index=1 .

I hope this helps.

Cindy Wells

Posted on Jun 12, 2019

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
kent581
  • 87 Answers

SOURCE: Viking Lily - free motion quilting - thread loops on underside.

I need more info.
>Where is your presser fooot pressure set(1-9) it should be around 4?
>How fast are you free motioning (faster is better? from 1-10 10 being full speed.
>Is your bobbin threaded correctly (I need to cover the basics.)?
>Never never use a needle smaller than a 90/14 for free motion (I know everyone's an expert...but trust me)
After all this, it's OK to tighten your tension up on top a little when free motioning and getting eyelashes/spider webs on bottom. around 6 should do it though.

Posted on Mar 19, 2009

  • 1 Answer

SOURCE: manual

Hello,

i need a manual for my Husqvarna 215 sewing machine.
can you help me?

Posted on May 23, 2009

  • 152 Answers

SOURCE: I have a Husqvarna Viking quilt 870 sewing

The overload message is usuall due to a bind in the mechanical function of the machine. When the motor has an extra "load" caused by something like a tight belt or dry bearing, it "overloads" the motor and the error message is displayed. It is doubtful your problem is computer related. Either way a trip to your service tech is required. If you continue to sew with it, you do run the risk of possible damage to some other parts of your machine. The computer portion of your Husqvarna is guaranteed for 5 years and the mechanical parts carry a 20 or 25 year guarantee depending on when you purchased your machine. A copy of your bill of sale from a Husqvarna Viking dealer or a stamped warranty card is the proof of purchase needed to obtain warranty replacement of parts. Labor is only guaranteed for 1 year.

Posted on Oct 06, 2009

  • 2 Answers

SOURCE: husqvarna viking emerald 183 - horizontal bobbin

I know the answer is a little late now...
I bought the machine a month ago and find that the bobbin picture is a bit misleading... i find putting the bobbin in the case, pushing the thread down over the hook thing (like in the picture) but then cutting the thread really short and putting the plastic cover on seems to work!
it is actually vary easy once you get the hang of it!

Posted on Feb 16, 2010

  • 1116 Answers

SOURCE: stippling for Viking emerald sewing machine

The switch in the back will lower the feed dogs.

If you need a manual - I found a PDF download by googling: viking emerald 183 manual

Posted on Feb 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I set the Husqvarna 300 sewing machine to do free motion embroidery. Do I need the embroidery attachment and get the machine to embroider with or with out the card


You can do embroidery or you can do free motion. If you're quilting a quilt sandwich (fabric, batting, backing fabric), you probably want to do free motion quilting. Embroidery would work better on fabric (with a stabilizer) but without the batting and backing fabric.

For free motion, you want a free motion foot--your machine's manufacturer probably provided one in the accessory kit (called a darning foot) or there are many generic free motion feet available for purchase (ie Big Foot quilting foot...). The BIG difference with a darning foot or free motion foot is that the shank is shorter than other presser feet because there needs to extra space between the presser foot and the needle plate so the quilter can easily manipulate the fabric. Usually, free motion quilters will drop the feed dogs to avoid feed dog interference with the fabric's movement, however, some quilters don't drop the feed dogs--just whatever works best for you and your machine. In addition, I use a Supreme Slider on the sewing machine surface--a silicone mat that provides a slick surface to help the fabric move.

There are a lot of web sites and video tutorials on free motion quilting. Take some time to watch them and then practice, practice, practice! It's an acquired skill so the more you practice, the better you will be.

...

Feb 09, 2018 | Husqvarna Sewing Machines

1 Answer

Viking designer 1


Hi, Free motion quilting is done with your programmed quilting stitches, Lower the feed dogs using the small white dial on the front of the machine behind the accessory tray, pick from one of the quilting stitches. they do make a free motion quilting tool ( I think they call it a hoop), but it just sets on top the material and helps you guide your material thru the machine. Hope this helps

Aug 29, 2014 | Husqvarna Sewing Machines

1 Answer

Why do the feed dogs reset while free motion quilting?


Your machine's feeddog drop control may loose or worn. Your authorized Viking repair dealer can fix the problem .

Jun 20, 2014 | Husqvarna Viking 1

1 Answer

How do I move the presser foot on a Husqvarna Viking Emerald 116 sewing machine?


Not sure what exactly you need to know. Are you trying to lift the presser foot or change the presser foot to another one? If it is lifting, there will be a lever of some kind behind the machine. On one of my Husqvarna machines it was a big flat "paddle" shaped lever, not sure what shape it is on the Emerald machines. Lift the lever from the bottom upwards and outwards. Most Husqvarna machines have clip on-and-off feet. You just gently pull forwards on the foot (while the presser foot is raised) to remove it, then push the new one on making sure the small bar part of the presser foot goes into the clip on the presser foot ankle.

Jun 16, 2010 | Husqvarna Viking 1

1 Answer

I have a Viva Limited edition-need help with free motion foot


Try running the machine at a faster speed, teh most common error new quilters maake is moving the fabric too fast and the machine too slow.

Mar 31, 2010 | Husqvarna Viking 1

1 Answer

Stippling for Viking emerald sewing machine


The switch in the back will lower the feed dogs.

If you need a manual - I found a PDF download by googling: viking emerald 183 manual

Feb 23, 2010 | Husqvarna Viking 1

1 Answer

As Iam quilting with my macine the top stitches are ok, but back of quilt the thread is all boggled up-Tension ??


yes, this is a tension issue. Check your bobbin area. Make sure you have put the bobbin in the case with the H logo up and the thread pulls off the spool in a counter clockwise motion. Make sure the bobbin is sitting in the case and threaded through the "catch" on the bobbin case. Then leave a long piece of thread from the bottom, holding the end of the top thread, lower the needle for one revolution using the handwheel. Does the top thread catch the bobbin thread and pull it to the top? This is done without fabric. Your checking to determine if the top thread catches the bobbin thread and pulls it to the top. IIf it does not, it is most likely hook/needle timing. f it does, gently pull on the bobbin thread and determine if it pulls through with a little resistence (checking bobbin tension). Make sure you are using correct needle -- Schmitz or Inspira needles are recommended (Universal size 80 is standard). Make sure you are using Husqvarna Viking made for your machine -- original ones were green but there are some new colored ones but all have the Husqvarna logo on them. Otherwise take it to an authorized Husqvarna Viking dealer. You can find your closest dealer at the Husqvarna Viking website - http://www.husqvarnaviking.com/us Good luck

Sep 23, 2009 | Husqvarna Viking 1

1 Answer

Viking Lily - free motion quilting - thread loops on underside.


I need more info.
>Where is your presser fooot pressure set(1-9) it should be around 4?
>How fast are you free motioning (faster is better? from 1-10 10 being full speed.
>Is your bobbin threaded correctly (I need to cover the basics.)?
>Never never use a needle smaller than a 90/14 for free motion (I know everyone's an expert...but trust me)
After all this, it's OK to tighten your tension up on top a little when free motioning and getting eyelashes/spider webs on bottom. around 6 should do it though.

Mar 09, 2009 | Husqvarna Viking 1

2 Answers

Free motion quilting Viking Designer 1


I had the same dissatisfaction when I switched from the 1+ to the Designer 1. After some trials I am now happy. You need the springy free motion foot. Part #413 03 76-45. You take off the white shank and screw it on with the metal bar over the needle hook. In the set menu turn the SensorQ on, the free motion on, select stitch 1 from menu V and drop the feed dogs. It also makes a big difference to use the straight stitch throat plate which just has a small hole for the needle to go through. One other hint is that I often have to reduce my needle tension 3 or 4 steps. Hope it works for you.

May 30, 2008 | Husqvarna Viking 1

Not finding what you are looking for?
Sewing Machines Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Sewing Machines Experts

radcal

Level 2 Expert

196 Answers

Douglas Plant
Douglas Plant

Level 2 Expert

220 Answers

Tally Girl
Tally Girl

Level 3 Expert

1134 Answers

Are you a Husqvarna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...