Question about Staples Office Equipment & Supplies

1 Answer

My staples 8 shredder activates only in reverse. nothing happens when i put a piece of paper in to shred.

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Staples Master
  • 64,308 Answers

It has out lived you , replace it no parts made to repalir it

Posted on Jun 16, 2019

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

SOURCE: shredder

Check for stuck paper and remove if any. Then check if motor is ok with a multimeter and also main switch.

Posted on May 21, 2007

  • 45 Answers

SOURCE: Our shredder is making a loud, grinding noise.

simply try resetting the machine. unplugging it waiting for about 30 seconds then plugging it back in, also is the unit mounted properly on the unit? It might be one of the gears that is not broken...if you have a warranty now would be a good time to call them as they will fix or replace the part for the unit.

Posted on Apr 15, 2009

venexcsd
  • 1185 Answers

SOURCE: the shredder will run in reverse but will not run foreward.

Inside the shredder there is a motor which is wired to run both forward and backward, the way it does this is to transfer the power from the switch to a couple of wires on the motor
The forward running motor will be linked to the auto start button which will tell it to work with the paper sensor.
When you select the Forward function the Auto Start is taken out of circuit and the Forward switch should supply the motor

After all of that I would say that the switch is open circuit on the Forward contact and needs replacing

Posted on Jun 12, 2009

JayBlair
  • 328 Answers

SOURCE: Shredder Jams with more than 1 piece of paper thickness

I have seen paper shreds build up inside the cutter housing on this model. It grows into a big tumor inside and places a lot of resistance. You will have to take it apart and clean it thoroughly. Also, oiling the cutter asm.

I’m happy to help further over the phone at https://www.6ya.com/expert/jayw_0e86fb055a7b73de

Posted on Sep 07, 2009

  • 1218 Answers

SOURCE: When I put a sheet

You dont give make or model???...however it sounds like you may have lost/broken a plastic gear inside..( the normal sound is the motor running??)...open it up to see what has been broken then contact the manufacturer.
This call was logged under "ROYAL" so if it is a Royal shredder you can contact them at 1-800-524-0799 for parts assistance once you know what is broken.

Posted on Dec 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Omnitech shredder ot-nxc10pa


You must first unplug it and look inside the shredding blades, especially around the spot usually near the center, where there is a pressure button. When paper hits it, it starts shredding. Chances are some pieces of paper have jammed just over it stopping paper from hitting it and switching it on. I have had to use long tweezers to work the jammed bits out... Once clear it will work again. Also using shredder oil every 50 sheets through will help it cut easier , and jam less frequently. Do not put too many sheets through together in a bunch. No staples...

Aug 23, 2014 | Office Equipment & Supplies

1 Answer

Can not feed paper


First try moving the switch manually to reverse. The machine should start. This may cause some paper to appear in the slot where you place the paper to be shredded. If it doesn't start, your problem may be more serious or complex and you should get in touch with the Staples store where you purchased it.
It may be that the paper you are trying to use is too lightweight. Try inserting a piece of cardboard (SLOWLY SO AS NOT TO LET THE BLADES CATCH THE CARDBOARD - LETTING IT CATCH THE CARDBOARD MAY BE BEYOND THE UNIT'S CAPACITY). If this starts the shredder, quickly remove the cardboard. If it continues to run (cycle), you may have had some paper blocking it.
Hopefully this has done the trick and everything now works. If not, talk to the Staples store where you bought it.

Jan 08, 2014 | Staples Cross-Cut Shredder

1 Answer

Spl-txc122a


The motor runs reverse even when in Auto mode, how do I fix it, and why did it happen

Mar 27, 2013 | Staples SPL1506X (CrossCut) Shredder

2 Answers

STAPLES TITANIUM CUTTER (SPL-TMC16A) CONTINUES TO RUN WITHOUT STOPPING AFTER PAPER HAS BEEN SHRED. THE FORWARD LIGHT FLASHES.


can't solve the problem, but wonder if I could get an owners manual for this same model (SPL-TMC16A)

Dec 16, 2010 | Office Equipment & Supplies

1 Answer

Royal 85x crosscut shredder stopped working


Some shredders aren't designed to shred anything more than paper. Credit cards, staples, paper clips and the like could have jammed it up. Try running the shredder in reverse and oiling the blades. More help with paper shredder oil here: http://hubpages.com/hub/Paper-Shredder-Oil

If you can't get the paper shredder up and running, it looks like you might have to pick up a new paper shredder. Paper shredders can be pretty cheap though, great guide to cheap paper shredders here: http://hubpages.com/hub/Best-Paper-Shredders

May 25, 2010 | Royal 85X Shredder

1 Answer

Shredder is jammed


hello. follow these steps:

  1. Turn the shredder off at the wall and unplug it. You DO NOT want to be poking round in those sharp blades and have it accidentally switch on!
  2. Take the top off the shredder and place it on a big piece of newspaper, or somewhere you can easily sweep up mess.
  3. Begin by getting a pair of tweezers and taking pieces of paper from one end of the shredding blades. This will loosen it up and give you more room to get the rest out.
  4. Carry on tugging the strips of paper out. It helps if you don't just pull a clump, but wiggle it from side to side. This will get the whole strip out, not just the top.
  5. If any pieces are curled round and you can't free them, cut them with the knife and then tug them out.
  6. Once it's mostly cleared, put the top back on and switch the shredder on. Put it on Reverse mode so it will spit the last bits back up for you to remove.
  7. If it's clear, continue shredding!

[edit] Tips
  • Remember to wiggle the paper, not just pull.
  • Shake it occasionally to get smaller pieces of paper out of the blades.
  • Try not to jam it in the first place (avoid loading a lot of paper or thick sheets of newspaper).
  • Use oil paper or performance oil to lubricate the blades on a regular basis. For an office shredder, medium to heavy usage can require lubrication as often as every three days.
  • To prevent the shredder blades from dulling, remove paper clips and staples before shredding. Shredding CDs and DVDs also cause premature wear & tear. Use the Disc Eraser (www.DiscEraser.com) if you have sensitive discs.

[edit] Warnings
  • Always turn the shredder off at the wall and unplug it! You don't want shredded fingers!
  • Be careful with the blades - they are sharp and you could cut yourself.

[edit] Things You'll Need
  • A pair of tweezers
  • A small, sharp knife

Oct 23, 2009 | Office Equipment & Supplies

1 Answer

SPL 1506X Shredder


Have you looked for hidden staples in the machine. Sometimes they can be hard to spot.

Aug 01, 2008 | Office Depot Ativa DQ60M Shredder

4 Answers

Staples SPL-1506X Shredder Issue


I had the same problem. I have a solution but I do not recommend this unless you have technical experience with repairing electrical appliances. I took the back cover of the main shredder unit to expose the wiring (there are 7 screws in total). The bin full sensor has a blue, green, and red connected to it. I clipped the blue wire to defeat the Bin Full error. You can look through the plastic window to check that the bin is full.

Apr 25, 2008 | Office Depot Ativa DQ60M Shredder

2 Answers

Shredder runs in reverse only can u help?


make sure your paper sensor detector is clean....If so, you probably have a bade sensor...

Mar 30, 2008 | Fellowes P700-2 Shredder

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Staples Office Equipment & Supplies Experts

Stephen Murphy

Level 1 Expert

14 Answers

Jim Akins

Level 2 Expert

201 Answers

Randy Schumann
Randy Schumann

Level 2 Expert

407 Answers

Are you a Staples Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...