Question about Refrigerators

1 Answer

I just got a grill for fathers day.we put it togetherand found that you packed 4 of the upper hinge or bottom hinge.i need 2 upper and 2 lower.model number is cg2240501-kf/cg2240506-kf

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    New Friend:

    An expert that has 1 follower.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 35 Answers

Call the manufacturer with the information and they will send you the correct parts.
Usually for free being it's brand new.
parts 888-837-1380 8-5 pst
Home Depot- Lone Star Charcoal Grill

Posted on Jun 20, 2019

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
jackboy
  • 2985 Answers

SOURCE: Sunbeam Outdated Parts

I guess you will have to make or get mone made up for you. You will not I venture be able to get one off the shelf.

Posted on Sep 09, 2007

  • 3 Answers

SOURCE: I need upper track (plastic

I have a Graco 4 in 1 Ultra Sleep System Model 4600 CL. There is a recall on this model for the track guides breaking. The website is www.simplicityforchildren.com You can get a replacement track system for free and you can also order parts at 1-800-858-8323.

I also have the complete instructions for assembly of the crib, toddler bed and day bed.

Posted on Aug 02, 2008

JSEhandyman
  • 368 Answers

SOURCE: Need replacement grill plates for a George Foreman GRP4P indoor grill

Hi joea64,

I'd contact the manufacturer (Salton, Inc.) customer service site for parts or manual. If they don't have them, they should know where to send you (though if they don't, I'd seriously wonder about the company).

Go to

http://prc.prodregister.com/prodprotect/applica/

And click on "George Foreman" (lower-right portion of the page), it redirects you to a secure webpage where you can register.

https://secure.prodregister.com/prodprotect/applica/gf.shtml

Part of the page reads:
"Call toll-free or visit our websites for assistance if you need more help.

Parts & Accessories:
Phone: 1-800-738-0245 (Monday–Friday, 8:30 a.m. to 8:00 p.m., ET)

Product Warranty:
Service: 1-800-231-9786 (Monday-Friday, 8:30 a.m. to 8:00 a.m., ET)"

If I can be of further assistance, let me know. If this helps or solves the issue, please rate it accordingly.

Thanks in-advance for using Fixya.com,

Jon

Posted on Dec 31, 2008

  • 24 Answers

SOURCE: DCS 30 inch oven door fell off

First thing is be careful them sprins are strong and will hurt your fingers bad if not careful. That said place both hinges in 1/3 open position they should stop there. if not put both all the way open then slide door back on and close. supposed to only lift off in 1/3 open position but whatever works.

Posted on Jul 25, 2009

alicantecoli
  • 22484 Answers

SOURCE: 1997 Jetta GLX VR6 giving

pull the multi plug connectors off the coil pack and check the connections ,and then rub the pins with a soft lead pencil and see what happens

Posted on Dec 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to remove door pins on a 2003 tahoe


take to a bodyshop as will need special tools , i just wonder why you would want to do this , don't try using a drift as will cause damage to hinges

Mar 13, 2015 | 2003 Chevrolet Tahoe

Tip

How to Reverse Your Refrigerator Door (Most units)


1. Remove the toe grille.
2. Remove top hinge cover if available. Trace around the hinge with a soft lead pencil. This makes the re-installation easier. Remove top hinge and lift door off the center hinge pin, and set the door aside.
3. Unscrew the center hinge pin using an adjustable wrench and save for reassembly. Ensure that the plastic washer stays on hinge pin.
4. Lift the refrigerator door off of the bottom hinge and set aside.
5. Remove center hinge and shim by removing inside screw and loosening two outside screws enough to allow hinge and shim to slide out. Tighten screws.
6. Loosen two outside screws on opposite side of refrigerator, remove inside screw and install center hinge.
7. Remove two screws on bottom hinge with 3/8" socket wrench.
8. Install bottom hinge on opposite side with the two screws removed from Step 7.
9. Unscrew the bottom hinge pin using adjustable wrench. Move hinge pin to other hold in hinge and tighten with adjustable wrench.
10. Reverse door handles.
11. Move freezer and refrigerator door stops to opposite side. Before starting screws, use an awl to puncture the foam.
12. Position refrigerator door onto bottom hinge pin and screw center hinge pin through center hinge into the top of the door. Close refrigerator door to help align hinge hole.
13. Tighten center hinge pin with adjustable wrench.
14. Remove cabinet and hinge hold plugs and move to opposite side.
15. Lower freezer door onto center hinge pin (if you have a separate freezer door).
16. Close freezer door. Have an assistant lift up on opposite side of the door while tightening screws to install top hinge.
17. Flip top grille and reinstall.
18. Plug in electrical power cord and turn refrigerator temperature control to center position. Adjust setting as needed.

on Oct 19, 2011 | Frigidaire Refrigerators

1 Answer

SAFELY REMOVING DOORS FOR SHIPPING


Good Morning Jill,

I see that you are trying to remove the doors on your Frigidaire refrigerator, model# FRS23R4A, for shipping purposes. Below are the instructions you will need to follow for both the refrigerator and freezer doors.


DOOR REMOVAL INSTRUCTIONS:
If it is necessary to move the refrigerator through narrow doorways, follow these steps to remove the doors.
IMPORTANT: Before you begin, turn your freezer and fresh food controls to "O" and remove electrical power cord from the wall outlet. Remove any food from the door shelves.

1. Disconnect electrical supply.
2. Open both doors, then remove toe grille.
3. Close doors.

To Remove Refrigerator Door:

1. Remove top hinge cover screw on refrigerator door and remove cover.
2. Trace around hinge with soft lead pencil. This will make it easier to realign doors when they are replaced.
3. Remove top hinge and lift refrigerator door off bottom hinge pin. Set door aside.
4. Remove bottom hinge, if necessary.
5. Reverse this procedure to reinstall refrigerator door.

To Remove Freezer Door:

1. Disconnect water line coming from lower hinge of freezer door at connection located under front of freezer: Press outer ring against face of fitting, then pull to remove tube.
2. Remove top hinge cover screw on freezer door and remove cover.
3. Disconnect wiring harness connector plug at top hinge: place your thumbs on flat sides of each connector and bend both parts back and forth, then with firm grasp, pull both pieces apart.
4. Trace around hinge with soft lead pencil. This will make it easier to realign doors when they are replaced.
5. Remove top hinge, allowing wiring harness to pull through hinge and lift freezer door off of bottom hinge pin. Lay door down flat to avoid kinking water line.
6. Remove bottom hinge, if necessary.
7. Reverse this procedure to reinstall freezer door.

When both doors have been reinstalled, connect water line by inserting tube and push until mark touches face of fitting, replace toe grille and plug in electrical power cord. Turn both temperature controls to center position. Adjust settings as necessary. Hope this is helpful.

-Best Regards-
WP

Mar 14, 2014 | Frigidaire FRS23R4A Side by Side...

1 Answer

How to replace cooling fan on peugeot 206


The cooling fan on the peugeot 206 is situated between the front grille and ththe radiator, To gail access to the fan you first need to remove the 4 push/pin fixings that hold the upper grille panel ,then remove the 2 torx screws from either end of the upper panel (one at each end. Next the lower grille panel needs to be removed by disengaging each end from just below the headlights, these ends are held in place by clips ,and care must be taken when pulling the lower grill from these clips.Once you have both upper and liwer grille removed ,it a simple matter of unplugging the fan connector ,and removing the 3 fixing bolts , the fan can then be removed ,

Apr 02, 2012 | Cars & Trucks

1 Answer

How to put in a upper door hinge pin


Put a jack under the door with a piece of 2x4, as close to the middle as you can. Jack up the door, watching the hinge pin until pin is in the center of the movement range. Put a long metal rod or socket extension on the bottom of the pin and tap out with a hammer. Use same rod to remove bronze - alloy bushing. Tap new bushing in and use a 16 penny nail to check alignment of holes in hinge to bushing, raise or lower jack to center. Tap in new hinge pin. Release jack and check door for alignment on latchpin - If low, jack up door to relieve pressure, loosen upper / lower hinge bolts, raise door with jack approximately 1/8 inch, retighten bolts, remove jack and test Repeat procedure until pin strikes the center of the latch..

Nov 10, 2010 | 1991 Ford Explorer

1 Answer

I have a 4 in 1 food network grill station and ned the instructions manual. I also need to find out how to order the handle which is broken.


my 4 in 1 grill one of the grills is stuck because someone put the lower grill on the upper part I can't get it off help I am dying for a panini!

May 31, 2010 | Kitchen Appliances - Others

1 Answer

How do I remove front cover of Fujitsu indoor unit


THE INTAKE GRILLE REMOVAL
(1) Open the intake grille.
(2) Pull down the knob.
(3) Lift the intake grille upward, until the axle at the top of the intake
grille is removed.

THE FRONT PANEL REMOVAL
(1) Remove intake grille (Reference the intake grille removal.)
(2) Remove four screws.
(3) The thumb is hung on the lower part as shown in the figure,
and it pulls to the front, pushing [-] mark , and bottom hooks
(two position) is removed from wall hook bracket.
(4) The front panel bottom is pulled to the front, and bottom hooks
is removed indoor unit.
(5) The front panel is pulled to the front, raising the upper surface,
and a front panel is removed.

Feb 23, 2010 | Fujitsu 18R1 Air Conditioner

1 Answer

Bottom door hinge replacement easiest way?


Hinge, Door Removal and Installation
  1. NOTE: A second person is required if the Flexi-Work Table 156-00070 is not available.
    Support the front door (20124) using Rotunda Flexi-Work Table 156-00070 or equivalent.
  1. Mark the location of the front door upper hinge (22800) and front door lower hinge on the front door and body.
  1. Remove the front door hinge-to-body retaining bolts.
  1. Remove the front door hinge-to-door retaining bolts and remove the front door upper hinge and front door lower hinge.
  1. To install, position the front door upper hinge and front door lower hinge to the front door and body. Install the retaining bolts. Tighten to 25-35 Nm (18-26 lb-ft).
  1. Adjust the front door and front door upper hinge and front door lower hinge as outlined, and remove the support.

Jul 01, 2009 | 1995 Ford Thunderbird

1 Answer

Broken hinge


TIP: Go to the web and type www.partselect.com enter your model number then scoll down to your part. Click to enlarge exploded diagram on left. Veiw enlarged diagram at top of page. You can print the entire diagram for exact assembly by holding your pointer in the upper left hand corner of diagram. Select the print icon. Now you have what you need. The lower hinge attaches the same as the top. If you found any of these suggestions helpful, please rate my solution. D. Lange

Apr 26, 2009 | Frigidaire PLMV169DC Microwave Oven

2 Answers

Replacement of keyboard on a hp ze 5000 laptop


My buddy and i put together a video a while ago for this you can find it here

This is not your model but the concept is the same.

Disclaimer: careful bad things can happen, not responsible etc etc :)

good luck and tell me how it goes, please don't forget to rate.

Nov 13, 2008 | Compaq Presario 2100 and 2500 ,NX 9000...

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Refrigerators Experts

Marvin
Marvin

Level 3 Expert

85111 Answers

Brad Brown

Level 3 Expert

18067 Answers

Gil Shultz

Level 3 Expert

3388 Answers

Are you a Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...