Question about The Office Equipment & Supplies

Open Question

The clock in my Niro stopped. The display looks like --:-- and the Time/Date button in setup is grayed out

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 85114 Answers

SOURCE: diagnostic display will not stop blinking

You have lost the keep alive memory, either the radio is defective or the fuse for that circuit is burned out.

Posted on Nov 21, 2008

Ad
  • 1 Answer

SOURCE: Pioneer DEH-P4900IB Changing Time and Date

when the radio is off hold the on the left bottom side for about 3 or 4 seconds and a menu should come on....keep hitting that button till the time comes on. use the up down left right to change it and once ur done just turn on the radio...good lucj

Posted on Dec 29, 2008

  • 1 Answer

SOURCE: Manual Information/Owner Guide

In order to toggle display of Temperature, Seconds, Day of Week, and Month, hold + and press Set once. Release and repeat to move through the various display configurations.

Posted on Apr 07, 2009

proton77
  • 1183 Answers

SOURCE: time of day clock stopped - DELL Inspiron 1525

Hi,
This is one of the known issues with the Inspiron 1525 computer.The problem is caused by faulty cmos battery. If you computer is in warranty kinldy call Dell to get the same replaced . if the system is out of warranty. You would need to replace the CMOS battery ie below the keyboard.
You can follow the instructions below

http://support.dell.com/support/edocs/systems/ins1525/en/SM/coinbatt.htm#wp1179839

Thanks
Proton

Posted on Feb 06, 2010

  • 3 Answers

SOURCE: How to reset the clock?

Push the button with the clock and calendar, this is directly over the 'cost' button, to display the date or time. Then use the 'Time set' button (this is the one for Memory - Plus - Equal). Hold the 'Time set' button down until the first figure blinks then release it. Use the number buttons to change the setting. When you have gotten the correct date or time entered oress the 'Time Set' button again.

Although it is only printed with 'Time Set' the button works for the date just as well.

Posted on May 05, 2010

Testimonial: "Just what I needed to know! Thank you"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How doI set the clock


Setting the Time (Without Date Display) If your vehicle has an AM/FM base radio with a single CD player and preset buttons numbered one through six, the radio will have a clock button for setting the time. You can set the time by following these steps: 1. Press the clock button until the hour numbers begin flashing on the display. Press the clock button a second time and the minute numbers will begin flashing on the display. 2. While either the hour or the minute numbers are flashing, turn the tune knob, located on the upper right side of the radio, clockwise or counterclockwise to increase or decrease the time. Instead of using the tune knob, you can also press the SEEK, FWD (forward), or REV (reverse) buttons to adjust the time. 3. Press the clock button again until the clock display stops flashing to set the currently displayed time; otherwise, the flashing will stop after five seconds and the current time displayed will be automatically set. To change the time default setting from 12 hour to 24 hour, press the clock button and then the pushbutton located under the forward arrow label. Once the time 12H and 24H are displayed, press the pushbutton located under the desired option to select the default. Press the clock button again to apply the selected default, or let the screen time out. Setting the Time (With Date Display) If your vehicle has a radio with a single CD player or a CD with DVD player, the radio will have a clock button for setting the time and date. To set the time and date, follow these instructions: 1. Turn the radio on. 2. Press the clock button and the HR, MIN, MM, DD, YYYY (hour, minute, month, day, and year) will appear on the display. 220 3. Press the pushbutton located under any one of the labels that you want to change. Every time the pushbutton is pressed again, the time or the date if selected, will increase by one. • Another way to increase the time or date, is to press the right SEEK arrow or FWD (forward) button. • To decrease, press the left SEEK arrow or REV (reverse) button. You can also turn the tune knob, located on the upper right side of the radio, to adjust the selected setting. The date will not automatically display. The only way to see the date is by pressing the clock button when the radio is on. The date with display will time out after a few seconds and go back to the normal radio and time display. If your vehicle has a radio with a six-disc CD player, the radio will have a MENU button instead of the clock button to set the time and date. To set the time and date, follow these instructions: 1. Turn the radio on. 2. Press the MENU button. Once the clock option is displayed. 3. Press the pushbutton located under that label. The HR, MIN, MM, DD, YYYY will appear on the display. 4. Press the pushbutton located under any one of the labels that you want to change. Every time the pushbutton is pressed again, the time or the date if selected, will increase by one. • Another way to increase the time or date, is to press the right SEEK arrow or FWD (forward) button. • To decrease, press the left SEEK arrow or REV (reverse) button. You can also turn the tune knob, located on the upper right side of the radio, to adjust the selected setting. The date will not automatically display. The only way to see the date is by pressing the MENU button and then the clock button when the radio is on. The date with display will time out after a few seconds and go back to the normal radio and time display. 221 To change the time default setting from 12 hour to 24 hour or to change the date default setting from month/day/year to day/month/year, follow these instructions: 1. Press the clock button and then the pushbutton located under the forward arrow label. Once the time 12H and 24H, and the date MM/DD/YYYY (month, day, and year) and DD/MM/YYYY (day, month, and year) are displayed. 2. Press the pushbutton located under the desired option. 3. Press the clock or MENU button again to apply the selected default, or let the screen time out

Nov 10, 2016 | 2007 Pontiac Torrent

1 Answer

Date and time arror


When you turn your machine on for the first time, the display

prompts you to enter the current date and time. After entering,

it will not appear anymore.

NOTE: When turning on the machine after turning it off for a

long time, you need to reset date and time.

1 Press Menu until "Machine Setup" appears on the top line

of the display.

2 Press the scroll button ( or ) to display "Date & Time"

on the bottom line and press Enter.

3 Enter the correct time and date using the number keypad.

Month = 01 ~ 12

Day = 01 ~ 31

Year = requires four digits

Hour = 01 ~ 12 (12-hour mode)

00 ~ 23 (24-hour mode)

Minute = 00 ~ 59

NOTE: The date format may differ from country to country.

You can also use the scroll button ( or ) to move the

cursor under the digit you want to correct and enter a new

number.

4 To select "AM" or "PM" for 12-hour format, press the or

button or any number button.

When the cursor is not under the AM or PM indicator,

pressing the or button immediately moves the

cursor to the indicator.

You can change the clock mode to 24-hour format (e.g.

01:00 PM as 13:00). For details, see "Changing the Clock

Mode" on page 2.10.

5 Press Enter when the time and date on the display is

correct.

6 To return to Standby mode, press Stop/Clear.

Changing the Clock Mode

You can set your machine to display the current time using

either a 12-hour or 24-hour format.

1 Press Menu until "Machine Setup" appears on the top line

of the display.

2 Press the scroll button ( or ) until you see "Clock Mode"

on the bottom line and press Enter.

The clock mode currently set for the machine displays.

3 Press the scroll button ( or ) to select the other mode

and then press Enter to save the selection.
4 To return to Standby mode, press Stop/Clear.

May 14, 2014 | Samsung SCX 4521F All-In-One Laser Printer

1 Answer

How do you set the clock


Hello
To set the clock to your SV-dvd 3E:

Your DVD-VCR contains a 24-hour clock and calendar used to:

Automatically stop programme recording

Preset your DVD-VCR to record a programme
automatically
You must set the date and time when:
You purchase the DVD-VCR

Do not forget to reset the time when you change
clocks from winter to summer time and vice versa

[1] Press SETUP on the remote control.
Result: The MAIN MENU is displayed

[2] Press the corresponding up/down button or Forward/Reverse buttons to select the
CLOCK SET option.

[3] Press the ENTER button to select this option.
Result: The CLOCK SET menu is displayed

[4] Press Reverse or Forward button to select the hour, minutes, day, month and year.
Result: The option selected flashes

[5] Press the Up/Down buttons to increase or decrease the value.
Result: The day of the week is displayed automatically

You can hold the Up/Down buttons down to scroll more
quickly through the values
[6] On completion, press RETURN twice to exit the menu
OK.

Oct 10, 2011 | Samsung SV-DVD3E DVD Player/VCR

1 Answer

Set clock, date, alarm on SI686 CD/ Radio / Alarm Clock with Sound Soother


Can you clarify what you need help with? To SET THE CLOCK push the "Mode" button twice. (The current time setting flashes on the display) Once it is flashing, Decrease the hours by pressing "1" Increase hours by pressing "2" Decrease minutes by pressing "3" and increase minutes by pressing "4". If no additional buttons are pressed the time will reset in about 10 seconds and the display will stop blinking.

TO SET THE DATE press the "mode" button 4 times. The current date setting will flash on the display. Decrease the date by pressing 3. Increase the date by pressing 4.

Decrease months by pressing 1. Increase the months by pressing 2. The date will reset in about 10 seconds when you stop pushing the buttons.

TO SET THE ALARM Press the "mode "button once. The display will begin to flash. Change the hours by pressing either 1 (increase) or 2 (decrease). To change the minutes, press 3 or 4. 3 decreases the minutes and 4 increases the minutes. Once you have the time reset, leave the unit alone for about 10 seconds. the display will stop blinking indicating the time has been reset.

TO ACTIVATE THE ALARM push the round button on the far right. You will see the alarm icon come on or off on the LCD display on the right side. Be sure you have set the AM or PM time correctly on the alarm time. It helps to recheck this now as I have made this mistake several times.

If you get stuck on military time and want the 12 hour clock the answer is posted on this site, as well.

Hope this helps.

Dec 25, 2010 | Sharper Image SI686 Clock Radio

1 Answer

How do I reset the clock on a 2008 Impala, and 2008 Accord? I can't find the manuals


For the Impala:

AM/FM Base Radio with a Single CD Player
This type of radio has a H (clock) button for setting the
time. You can set the time by following these steps:
1. Press the H button until the hour begins flashing on
display. Press this button a second time and the
minutes begin flashing on display.
2. While either the hour or the minutes are flashing,
turn the f (tune) knob, located on the upper right
side of the radio, clockwise or counterclockwise
to increase or decrease the time. Instead of using
the tune knob, you can also press the SEEK arrows,
\FWD (forward), orsREV (reverse) buttons
to adjust the time.
3. Press the H button again until the clock display
stops flashing to set the currently displayed time;
otherwise, the flashing stops after five seconds and
the current time displayed is automatically set.
To change the time default setting from 12 hour
to 24 hour, press the H button and then the
pushbutton located under the forward arrow label.
Once the times 12H and 24H are displayed, press the
pushbutton located under the desired option to
select the default. Press the H button again to apply
the selected default, or let the screen time out.
With Date Display
Single CD (MP3) Player
This type of radio has a H (clock) button for setting the
time and date.
To set the time and date, follow these instructions:
1. Turn the radio on.
2. Press theHbutton and the HR, MIN, MM, DD,
YYYY (hour, minute, month, day, and year) displays.
3. Press the pushbutton located under any one of the
labels that you want to change. Every time the
pushbutton is pressed again, the time or the date if
selected, increases by one.
• Another way to increase the time or date, is to
press the right SEEK arrow or\FWD button.
• To decrease, press the left SEEK arrow or
sREV button. You can also turn the f (tune)
knob, located on the upper right side of the radio,
to adjust the selected setting.

The date does not automatically display. To see the
date press the H (clock) button while the radio is
on. The date with display times out after a few seconds
and goes back to the normal radio and time display.

Mar 15, 2010 | 2008 Chevrolet Impala

1 Answer

Wrong time printed on fax


  1. From the machine, press the [Menu] button until 'Machine Setup' appears on the top line of the display.
  2. Press the right arrow button until 'Date & Time' is displayed on the bottom line, then press [Enter].
    1. Enter the correct time and date using the numeric keypad. By default, the machine clock mode is set to 12-hour format; however, this can be changed to a 24-hour format (see the change the clock mode section below).
    2. Month = 01 ~ 12
      Day = 01 ~ 31
      Year = requires four digits
      Hour = 01 ~ 12 (12-hour mode)
      00 ~ 23 (24-hour mode)
      Minute = 00 ~ 59
    1. note_image33x30.gif
    Note: To select 'AM' or 'PM' for a 12-hour format, press the * or # button or any number button.
    1. Once the correct date and time has been entered, press [Enter].
    2. Press the [Stop / Clear] button to return the machine to Standby mode

    Feb 19, 2009 | Xerox WorkCenter PE120i All-In-One Laser...

    2 Answers

    IN 120 base keeps flashing CL


    This is due to the base unit losing power and needs the clock resetting.
    The handsets retain their clocks under battery power so this is a little misleading.

    To reset the base unit clock:
    - press the OK key
    - press the 'down' arrow twice until "DATE/TIME" is displayed.
    - press the OK key again, this will display the year. Enter the correct year on the handset numeric keypad and then press OK. (Only the last two digits of the year need to be entered).
    - The date is then displayed in MM/YY format, enter the correct date on the handset numeric keypad and then press OK.
    - The time is then displayed, enter rhe correct time on the handset numeric keypad and press OK.
    - The handset then beeps and displays "SAVED".
    - Press the "C" button and replace the handset on the base unit.

    The base unit should now stop flashing "CL".

    Jul 09, 2008 | Lands Phones

    1 Answer

    Centrios DVD Recorder


    Setting the clock
    1. Press SETUP in no disc mode or full stop mode,MENU screen
    appears on the TV screen.
    2. Using v select SETUP MENU, then press ENTER or >,
    BASIC SETUP is highlighted.
    3. Using v to select “Set Clock ”, then press ENTER or >,
    “Set Clock Setup ”screen appears.
    4. Press</>/^/v repeatedly (or numeric buttons) to set the
    date and time.
    5. Press > to select “Done”or“Cancel ”, and then press ENTER ,
    BASIC SETUP returns.
    6. To exit, press SETUP.
    7. Press POWER to turn off the unit, the clock appears on
    the VFD display.

    link to manual http://www.centrios.com/content/support.aspx?language=en-CA#

    Mar 03, 2008 | Centrios EDW8020 DVD Recorder

    1 Answer

    Setting clock


    First select calender press enter. to set date press stop then use < arrows > to set year, up and down to set month, press stop to comfirm. Then use navigation buttons to select cuarrent date and press enter to confirm. To exit press menu button.
    Use nav buttons to select clock, press enter to confirm the clock display will appear.
    To set clock press menu for custom set up. Use down arrow key to find "set time" right arrow to kighlight set time press enter, then arrow keys to set time then enter then left arrow all the way to the left then down to exit, athen enter.
    Hope this helps.
    chuck32


    First hit setup then find settings, then enter. Use arrow keys to change time, then enter

    Feb 03, 2008 | Tao MUSIC SPECTARE 5.6 DIGITAL PICTURE...

    1 Answer

    How to set time and date


    Turn on. Goto channel 3 or 4. Press DVD/VCR button until display says VCR. Press TV/VCR button until the display says VCR. Press SETUP button. Select SYSTEM SETUP. Select CLOCK SET. Edit time and date. Press SETUP button.

    Jan 07, 2008 | Toshiba SD-V394 DVD Player/VCR

    Not finding what you are looking for?
    Office Equipment & Supplies Logo

    Related Topics:

    17 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top The Office Equipment & Supplies Experts

    Scott Yeoman

    Level 2 Expert

    121 Answers

    vince

    Level 3 Expert

    1234 Answers

    Are you a The Office Equipment and Supply Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...