Question about Whirlpool Refrigerators
The ice cubes are starting to look like they have dust in them, just a little brown/yellow but not ALL of them just about 2/3's
NO This model does not have a water filter.You will need to complete disconnect the ice maker and clean it out. Then remove and flush the fill tube. If ice still appear dirty, you may to replace the water valve,the water tube and the ice maker too. I will link the parts needed and see the repair video on how to access them. https://www.appliancepartspros.com/whirlpool-whirlpool-icemaker-kit-4317943-ap2984633.html
Posted on Jun 19, 2019
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Comment regarding catriver Aug 18 post: Shorting L&V caused valve to work I believe, at least I think I heard it operate, but shorting T&H did not cause gear to move. So does that indicste a different problem? Still no ice. JimB
Posted on Oct 05, 2007
sounds like your just might not be using enough ice and they are defrosting and clumping together.figure your pulling ice from front of bucket the the backs hardly get used espescially in winter your not using as much ice. or ice maker is slightly over flilling water and dripping over rear of unit
Posted on Feb 24, 2008
SOURCE: Particles in ice cubes
Most new water/ice systems have break-in procedures in the manual, including flush a couple gallons of water through the water dispenser and disposing the first 24hrs of ice.
Are the particles present in the filtered water before adding ice? If so, you can probably assume the contamination is from the water tank so you should flush several gallons of water through the system to get rid. If the particles are present after adding ice, try pulling out the ice bin and dumping the ice.
Posted on Jan 07, 2009
SOURCE: Ice cube dispenser not working
I had this problem. The root cause was that mineral deposits had built up in the ice cube tray. The ice would not "dump"... but stayed in the tray after the dump cycle. I did not catch it quickly and eventually the plastic frame broke. That was easily replaced. Inspect the ice tray to see that all cube surfaces are smooth. If there are mineral deposits, they need to be removed. Do NOT scrub with anything abraisive or you will ruin the tray. As you are looking straight on at the Ice maker, with the bin out, depress the small black retangular tab. The tray assembly will come apart to remove the tray. Rinse the tray, then fill with warm vinegar. Let it soak. You may scrub with soft cloth, finger or fingernail to remove deposits. Replace the tray and you should be in business.
Posted on Oct 14, 2009
Tips for a great answer:
Jan 25, 2018 | Whirlpool Refrigerators
Mar 12, 2015 | Whirlpool Refrigerators
Jan 07, 2010 | Refrigerators
Dec 03, 2009 | Whirlpool 25.6 cu. ft. Side-by-Side...
Sep 13, 2009 | Whirlpool Refrigerators
Aug 20, 2009 | Maytag MSD2732GR Side by Side Refrigerator
Aug 15, 2009 | Refrigerators
Jul 12, 2009 | Whirlpool GD2SHGX Refrigerator
45 people viewed this question
Usually answered in minutes!