Question about Cobra Radio Communications

Open Question

I have a cobra frs 110 that wont accept someone talking

Push talk button and say what I want to say but they can't hear. ..we are on sale channel

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
Agent Ken
  • 250 Answers

SOURCE: T5900 Walkie Talkie Issue

Hello Bo Duke,

If one radio won't walk to the other my guess if that you have the Privacy Code function set up incorrectly.

The privacy code function mutes the radio unless it receives a signal from another radio transmitting the same privacy code. If Privacy Codes are turned on for Radio A but not turned on for Radio B then you will be able to transmit from Radio A to Radio B but not from Radio B to Radio A. If Privacy Codes are turned on for both radios but each unit is set to a different code then neither radio will be able to talk to the other.

Make sure that the radios are both set to the same privacy code or that the privacy code function is turned off on both radios. You can find more information on how this function is set in the radio's Owner's Manual.

Hope this helps!
Ken
"Go Ahead. Use Us."

Posted on Jul 03, 2008

Ad
  • 2 Answers

SOURCE: Motorola Talkabout Basic

I believe you do not need to hold the monitor button when changing channels
Push the talk button till you have the channel you want then push monitor button to accept
Hope this works

Posted on Dec 31, 2008

  • 2 Answers

SOURCE: cobra classic 29 ltd

Had fixed the same problem yesterday. My cobra worked when it wanted to, when it didn't it looked like you explained. I found out that on my cobra the blue wire on the mike connector was broken. When it disconnects, no sound. after soldering, everything works fine.

Posted on Jan 06, 2009

  • 514 Answers

SOURCE: push the talk button and it said no link to base reconnect ac ada

go to page 35 of the manual ("http://service.us.panasonic.com/OPERMANPDF/KXTG1032.pdf" if you don't have it) good luck!

Posted on Feb 22, 2009

eradiostore
  • 1655 Answers

SOURCE: Can't hear each other when talking?

Here is a copy of the user manual: http://www.giantintl.com/ContentManage/manuals/Moto/SX900%2002-22-08.pdf Double check the programming of your frequency and interference eliminator code.

Then you might check your Qt filter and your call tones. Set both to the zero (off) position and see if you have the same issue.

Posted on May 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I'm trying to find out how to use them i got two Motorola Talkabout T5100 from a yard sale i got both on same channel i push talk and nothing


As a basic test, if you press the transmit button on one, you should hear some sort of response from the other. I suspect your T5100s are defective.

May 26, 2017 | Motorola Radio Communications

1 Answer

How to change channel


Spirit GT: Programming a Frequency to a
Selected Channel:
1. Press and hold down the Push-To-Talk
button while turning the radio on, wait for
approximately 5 seconds then release the
Push-To-Talk button.
2. Use Scroll button to select one of the 8
frequencies.
3. On a Spirit GT+, press the Monitor button.
4. The current channel will flash, press scroll
button to change channel.
5. After the second channel is selected, press Monitor button again, current
frequency for second channel will flash. Figure 16.
6. Use Scroll button to select new frequency.
Exit Programming Mode - 3 Ways
1. Press Push-To-Talk to exit completely.
2. Allow the Menu time to expire (10 seconds).
3. Press Menu button to go to code programming.

Here is a link to the user manual: http://www.motorola.com/mdirect/manuals/Spirit_GT_User_Manual_E.pdf

Jul 17, 2009 | Motorola Spirit GT Pro (2 Channels) 2-Way...

1 Answer

How do i change the channel?


Programming a Frequency to a
Selected Channel:
1. Press and hold down the Push-To-Talk
button while turning the radio on, wait for
approximately 5 seconds then release the
Push-To-Talk button.
2. Use Scroll button to select one of the 8
frequencies. Figure 16.
3. On a Spirit GT+, press the Monitor button.
4. The current channel will flash, press scroll
button to change channel.
5. After the second channel is selected, press Monitor button again, current
frequency for second channel will flash. Figure 16.
6. Use Scroll button to select new frequency.
Exit Programming Mode - 3 Ways
1. Press Push-To-Talk to exit completely.
2. Allow the Menu time to expire (10 seconds).
3. Press Menu button to go to code programming.

Here is a link to the user manual: http://www.motorola.com/mdirect/manuals/Spirit_GT_User_Manual_E.pdf

Jun 25, 2009 | Motorola Spirit GT Pro (2 Channels) 2-Way...

2 Answers

Poor tranmission with my Uniden PRO520XL


you need a swr meter to check your standing wave.

Apr 07, 2009 | Uniden PRO520XL (40 Channels) 2-Way Radio

3 Answers

Users Manual on how to use


Motorola Walkie Talkie Code and Channel Setting

  1. Push and hold On/Off button. It will tell you Code & Channel
Note: You are now in the change mode
  1. Change Code - Push the talk button till handsets match Code then push monitor button to accept
Note: You are still in the change mode so you can change Channel
  1. Change Channel - Push the talk button till handsets match channel then push monitor button to accept
  2. To check repeat step 1 then push on/off button

Dec 19, 2008 | Motorola Walkie Talkie 2-Way Radio

1 Answer

Motorola Talkabout Basic


I believe you do not need to hold the monitor button when changing channels
Push the talk button till you have the channel you want then push monitor button to accept
Hope this works

Dec 16, 2008 | Motorola Walkie Talkie 2-Way Radio

1 Answer

Hearing Aid Compatability


Under ADA it is the employer's responsibility to make adaptations to your condition. Their radio provider should be able to provide you with hearing aid compatible headsets.

Jul 14, 2008 | Kenwood ProTalk UBZ-AM14 (14 Channels)...

4 Answers

Programming Bearcat BC 55XLT Scanner


Ok doc, I'll see if I can walk you thru this as there don't seem to be a manual available for download.
* Push manual button and bring it around to channel #1
Enter the freq including the decimal point. Push the E button to enter the freq into the first channel.
* Push manual again and move to channel #2 and repeat.
If you need some new freq's for your area, go here, click on your state, county, and it'll give you a complete rundown.
http://www.radioreference.com/apps/db/

If you need 10 codes for your area, go here and click on your state.
http://www.nat-com.org/radio.htm
If you need anything else, let us know,, Mechanic

Feb 19, 2008 | Radio Communications

1 Answer

One way comm only


swap batteries if does not work this unit should need repair or replace, display blinking can be produced for power failure ( battery, contacts, circuits) or can be a controller issue.

Feb 07, 2008 | Motorola Talkabout T5500 (7 Channels)...

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cobra Radio Communications Experts

Brad Brown

Level 3 Expert

18072 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Chris

Level 2 Expert

197 Answers

Are you a Cobra Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...