Question about Toshiba Televison & Video

Open Question

How do I get MENU to work on Toshiba control? Also, how can I change channels using remote?

I have to switch to using my Frontier remote to acquire MENU and change channels

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 119 Answers

SOURCE: FPA Lock

After doing a little research, it looke like the front panel lock , can only be removed from the parental control menu using your remote. If your universal remote does not get you into the menu, see if you can borrow a friends rca remote long enough to get you into your menu & remove the fpa.

Posted on Nov 03, 2006

Ad
  • 280 Answers

SOURCE: remote control changing channels

Make sure to push the TV button on the remote. some times it will be in the wrong mode ie VCR.

Posted on Apr 18, 2008

  • 96 Answers

SOURCE: Toshiba 2100TB tuning without the remote control

If you are sure, that there's no way to do it manually on the TV, there are only two solutions: buy a new remote control according to your TV set model (sometimes it's hard to find) or buy a universal remote control

Posted on Jan 30, 2009

  • 27 Answers

SOURCE: Sky remote wont control on/off , volume, or terrestrial channels

Press tv on the Sky remote

press and hold select and red until the led blinks twice
type in 0 0 6 0
press the power button, if the tv turns off then the press select and the remote should work all the tv functions.

If the tv does not turn off then press tv then the power button and keep doing this until the tv turns off, once it turns off press select and it should work.

If you have any problems let me know

Dazz

Posted on Apr 04, 2009

  • 192 Answers

SOURCE: my remote control for my polaroid tv wont change channels.

You may be able to program your cable box remote to control your TV in addition to your cable box. When they initially set up your cable box they probably left a pamphlet giving you instructions on how to program your remote. I'm not sure why you can't change the TV channels manually but this may give you a work-around.

Posted on Apr 26, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can`t find the code to use my toshiba tv control to work my direct tv satellite to change the channels


try working it the other way, input the code to work your toshiba television from the direct tv remote.

Sep 13, 2014 | Toshiba 40RV525R 40 in. HDTV

1 Answer

Toshiba tv 40rv525u has started to change channels


My TV 40RV525U changing channels, menus itself for few months ( I use antenna).
my son tried to stop the channel scrolling by enter weird number into the channel to stop it scrolling such as 555, 777..
later, it turn on off by itself and unable to hold on a channel
I call Toshiba customer service and they ask money $25 for troubleshooting but I denied since I do not want to waste money and time.

Now, I found how to fix it myself.

In my case, something was wrong with the signal comes from the button control on the left side of the TV.
========================
What I did
========================
unplug the power cord.
Remove back cover.
Look into the motherboard ( biggest green at the center).

First, I disconnect a connector on the motherboard come from the IR board that receive the wireless signal control ( meaning the remote is disable).
I turn on the TV, press on Menu button on the TV side. Menu is still scrolling.

I turn off TV, disconnect power cord and connect the IR connector back to the motherboard.
I then disconnect the nearby connector that comes from the side control buttons.

Turn on the TV by remote, press menu button on the remote to check. The menu stays.

DONE.

I use electric tape to seal off the connector and let it hanging there.
Close the TV back panel

I have been watching TV for 3 nights without menus/channels scrolling.
NO AVAILABLE red message when watching DVD is no longer existed.

Hope this help someone else.

Jan 20, 2012 | Toshiba 40RV525U 40 in. LCD TV

2 Answers

I bought a Toshiba TV with remote CT90326 from a friend who had a different service (satellite) and I have cable and the remote works to turn on the TV , punch in specific channels, and to change volume,...


Any television remote will give full access to the television functions. The remote must be specific to that television. Google
make model replacement remote
There are original ones on ebay, plus companies that sell remotes that are an exact copy. The CT90326 may be for another Toshiba model, or of course it may be faulty.

Then we have the remote on the cable or satellite unit. That gives full command of the unit functions, but BASIC control of the television, normally On, Off, Channel Up and down to allow access to DVD or similar and Volume Up and Down. Everything else is done from the TV Remote.

To get the cable remote to make that happen, you Google
Toshiba Remote Codes
and run through them all until a selected code allows you to switch the television on and off.

Sep 25, 2017 | Toshiba Televison & Video

3 Answers

Toshiba 40rv525r screen says NOT AVAILABLE


I've had the same issue! This is caused by the control panel telling the TV what to do - does it change channels on its own, too, or turn off or on on its own?

What you need to do (if you've not already done it) is lock the control panel out, which you can do under the LOCK menu.

What may help is running the factory reset on page 54.

Mar 22, 2010 | Toshiba 40RV525U 40 in. LCD TV

1 Answer

Tune in channels


Switch TV on
Press “MENU” on remote until 3 blue arrows appear
Press “VOLUME” keys to tune up or down (shown on blue bar)
When required programme is tuned, input required Channel number (appears on 2 green lines at top) e.g. 02 or 14
Carry on tuning and allocating channel numbers
Select “MENU” to clear or wait until it clears by itself
Channels should now be tuned to allocated numbers

Feb 21, 2010 | Televison & Video

1 Answer

Wc-fm2 remote not working


Mine does not work any more. I tried a Toshiba replacement but that does not work either. Sometimes it would power up but the menu and channel change did not work nor the volume.How can I determine if it is the TV and not the remote.

Jul 13, 2008 | Toshiba WC-FM2 Remote Control

3 Answers

Toshiba 24AF44


You need the original remote controller to be able to switch input modes.Universal ones usually don't work. If you don't have the original remote and can't find it ever or if it is too expensive you can buy an rf modulator ( very cheap) and connect your dvd player, game console etc) to the modulator then connect the modulator to your antenna with a coax cable. This worked for me. It placed the connection to channel 4 and other cable channels are still working,

You can buy the RF Modulator from: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=180299245670

Mar 16, 2008 | Toshiba 24AF45 24" TV

1 Answer

Channel numbers scrolling


the tac switches have gone bad.this happens from age or sometimes from washing the screen of the set and moisture gets on the.. it is not a big job but it does involve soldering skills

Nov 28, 2007 | Sony FD Trinitron WEGA KV-32FS100 32" TV

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

28 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toshiba Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76140 Answers

Jaime Hernandez

Level 3 Expert

2337 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Are you a Toshiba Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...