Question about GE Dishwashers

Open Question

Ge dishwasher top control panel - GE Dishwashers

Posted by on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: GE Max dishwasher no lights on panel

I have the same problem and actually found a workaround by mistake you may try as a temporary solution (if that works for you):

- press and hold the lock button for a couple of seconds
(the delay timer would increase by 1 hour)
- press and hold the lock button again
- repeat until it reaches 9hrs
- repeat one more time: the control panel should be functionnal again.

Let me know if that worked for you!

Posted on Mar 22, 2008

Ad

SOURCE: Problem with GE Profile Dishwasher

My delay start switch does not work and the dishwasher beeps periodically throughout the day. Also, I have it set for a 109 minute cycle and after about 20 minutes it says that I only have 35 minutes left in the cycle! Any suggestions?

Posted on Jan 27, 2010

  • 5370 Answers

SOURCE: i replaced the control panel on ge double oven

If the door isnt locked but the control board is saying it is you need to replace the door lock switch.
---------- The door lock switch is not getting detected by the control panel.Disassemble the top door lock assembly, clean it and reconnect and see if that helps, if not then door lock switch has to be replaced.
----------

You can get required parts from online sites like: --- www.repairclinic.com or from searspartsdirect online site.

----------- This should help. Thanks.Helpmech.

Posted on Jul 29, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I have a GE dishwasher model number GLDT696TSS. I does not turn on. No lights on the panel. Tried various outlets. Any suggestion?


The control panel is defective, it is about a $200-$300 (USD) repair, so weigh you options new or repair.

Jan 07, 2017 | GE Dishwashers

1 Answer

GE dishwasher model GLD5868V15SS handle loose


This model comes with two types of doors. One with a single panel with integrated control on top or a two part door with control unit in front. The handle varies.

If you have a single door panel with handle bar across from right to left then you need to carefully unscrew the back panel screws and free up the front panel. the handle is screwed to the front panel from inside. Once you tighten carefully put the back door panel in and tighten. Take photos along the way to make sure you get back where you started. Also unplug dishwasher before working on it.

If you have a two part door with front control then handle and access to it is different. See diagram on this website for blow up of the panel and location of handle (part 713).

ESCUTCHEON DOOR ASSEMBLY Diagram Parts List for Model GLD5868V15SS GE...

You can magnify the image or take a full screen view for clarity.

Aug 29, 2014 | Dishwashers

1 Answer

How can I start my dishwasher?


door switch out of adjustment, must close micro switch to run

Jul 07, 2014 | GE Dishwashers

2 Answers

Control panel inoperable - 2nd time this has happened. First time repairman said "it was fried" because the panel is just under the countertop - of course this is how it is designed to be. Now it has...


Is it operable when the door is close? I'm having a similar problem. The console panel on the top of the door appears to be not working. No lights. No buttons will respond. However when the door is shut, I can squeeze a finger to the start button and actually start the dishwasher. Light also come on when the dishwasher door is closed.

Aug 11, 2010 | GE 24 in. Profile PDW9280JSS Built-in...

1 Answer

The panel on my ge profile ss dishwasher is not working...


At first thought, it sounds like the control board has gone bad. Make certain it is properly plugged in. If no luck there, call the repairman.

Feb 10, 2009 | GE 24 in. Profile PDW7800 Built-in...

1 Answer

GE Profile Dishwasher beeping


Mine was doing the same thing. It was eligible for a recall.
Free repair or rebate toward new purchase. 1-877-275-6840 or go to website geappliances.com

Jul 01, 2008 | GE 24 in. Profile PDW9200J Built-in...

1 Answer

No lights on the control panel


check the thermal fuse at the control panel, the door switch, or the electronic control.

Mar 07, 2008 | GE 24 in. Profile PDW9880JSS Built-in...

2 Answers

Problem with GE Profile Dishwasher


My delay start switch does not work and the dishwasher beeps periodically throughout the day. Also, I have it set for a 109 minute cycle and after about 20 minutes it says that I only have 35 minutes left in the cycle! Any suggestions?

Mar 04, 2008 | GE 24 in. Profile PDW9280JSS Built-in...

2 Answers

GE Max dishwasher no lights on panel


I have the same problem and actually found a workaround by mistake you may try as a temporary solution (if that works for you):

- press and hold the lock button for a couple of seconds
(the delay timer would increase by 1 hour)
- press and hold the lock button again
- repeat until it reaches 9hrs
- repeat one more time: the control panel should be functionnal again.

Let me know if that worked for you!

Feb 04, 2008 | Dishwashers

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Dishwashers Experts

Mike

Level 3 Expert

4357 Answers

Archie Ferrarini
Archie Ferrarini

Level 3 Expert

869 Answers

Vitally Alcher

Level 3 Expert

1645 Answers

Are you a GE Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...