Question about Brother DCP 130C All-In-One InkJet Printer

4 Answers

Brother 130c print unable 50

Removed all paper jam and comes up with "print unable 50" see troubleshooting and routine maintenance.

Posted by on

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Solution #1 is absolutely spot-on from adnanbhatti, copy the link into your browser to be able to see the photos of the printer and how to slide the print head:
http://welcome.solutions.brother.com/BSC/public/us/us/en/faq/faq/000000/000500/000065/faq000565_013.html?reg=us&c=us&lang=en&prod=dcp130c_all&Cat=11

When I slid the print head over as specified, I found a little crumpled paper fragment soaked with ink. Pulled it out.... I turned on the printer, it ran a cleaning cycle automatically, and started printing just fine!

Posted on Nov 30, 2009

Ad
  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,188 Answers

I quote this from the official Brother website.
Address:

http://welcome.solutions.brother.com/BSC/public/us/us/en/faq/faq/000000/000500/000065/faq000565_013.html?reg=us&c=us&lang=en&prod=dcp130c_all&Cat=11
Title:
"Howdo I clear the message Unable to..." ( "Unable to Change" "Unable toClean" "Unable to Init" "Unable to Print" "Unable to Scan" )? Description:
Themessage "Unable to -" ( "Unable to Change" "Unable to Clean" "Unable toInit" "Unable to Print" "Unable to Scan" ) is a general message and mayappear for different reasons.
To clear the message, you need to disconnect the Brother machine from the power outlet to check the machine.

Follow the steps listed below:

  1. Check for foreign objects, such as a paper clip or scrap of paper, inside the machine.
    Disconnectthe machine from the power outlet and open the scanner cover by pullingup on the lower right corner of the cover. Look inside the machine andremove any foreign objects. If you see jammed paper or another iteminside this area, gently pull it out and then close the scanner coversecurely.

  2. If the error continues to appear, move the print head and examine under the print head.
NOTE : The images shown below are from the representative product and may differ from your Brother machine.
2-1.Disconnect the Brother machine from the poweroutlet.
2-2.Open the scanner cover by pulling up on the lower right corner of the cover.

brother 130c print unable 50 - 565_bhmini1.gif
2-3.Check the print head's position.
In the example photo the print head is positioned at the left hand side of the platen area.


jam3.gif
2-4.Gently move the print head to the center.

Caution Be careful to not force the print head to move.
If the print head is positioned at the far right hand side, youcannot move it. Please contact Brother Customer Service.


2-5.Examine under the print head. If anythinbrother 130c print unable 50 - jam7.gifnd, remove it.

jam7.gif Hint Use a flashlight if necessary to check thoroughly.


2-6.Close the cover and reconnect the machine to the power outlet.
If the message continues to appear on the LCD, the machine will require repair.

Posted on Aug 18, 2009

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

HP was one of the first companies to introduce laser printers among the users. HP is known for its steadiness, user-friendliness and consistency. In case, you are facing any problem while using HP printers, call on our HP printer toll-free number for quick assistance. Visit: https://hp-printer-help.com/hp-printer-support/

Posted on Aug 20, 2019

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Legend:

    An expert who has written 200 answers of more than 400 characters.

  • Brother Expert
  • 236 Answers

Solutions to Fix Brother Printer Error Code 76:-
Solution 1:- Change the Fuser
The Error Code 76 in your Brother printers is also related to fuser error, so you need to change the fuser, but first just in case try to reset settings to factory defaults.
Solution 2:- Change or Update the IP Address
The other solution is that is to change the IP Address. For this you have need to do right click on your printer, click "Properties", then click the "Ports tab" then hit on your Brother printer and then click on "Configure port: (or you can delete the existing one and then add another one).
Furthermore, if you want to do is update the IP Address, you can. But the problem is that the Brother Printer doesn't have a static IP address, it's dynamic. If you want to confirm that, then go to your Brother Printer and press the "Reports" button and then print out the network configuration report. Now your IP address will show on that. It's actually the last digit in the IP address that changes. This will absolutely solve your problem.
For more Info Visit Us: Fix Brother Printer Error Code 76

Posted on Jul 25, 2019

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Printer says unable to print. see troubleshooting and routine maintenance chapter in user guide problem is i have lost my user guide please help kind regards k .cleckner lcd says see troubleshooting and...


Hi there
No problem all the way from Wales UK for you.

I have put a PDF files on my website for you to download.

Just click on the links it will download for you.
It got all you need to know in this file.
You can read it on site and print it strait off the website or save it to your PC then print it out.

Click LINK= http://www.4all2sell.com/pdf/Brother-DCP-130C-Manual.pdf

You will need a adobe reader to see this file If you not got an Pdf reader you can download it off this link free.
http://www.adobe.com/products/reader/

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Mar 13, 2010 | Brother DCP 130C All-In-One InkJet Printer

1 Answer

BROTHER MFC210-C "UNABLE TO INIT"


good day! Unable to print 50 means'' the machine does not work due to paper jam or some sensor...mostly unable to print 50 is sensor problem. to clear the problem clean the sensor, and then the mechanical...t
unable 50-wvbqo0cgzuweogbaoky5sn4m-3-0.png

Dec 07, 2017 | Brother MFC 210C All-In-One InkJet Printer

1 Answer

Unable to print code 50


put the right print cartridges in from Brother...brother




Aug 20, 2008 | Brother DCP 130C All-In-One InkJet Printer

1 Answer

Not printing


my printer doesnt work, what do i need to do so that i can use my printer again,pls kindly give me the information, it always said that go to the maintenance and routine maintenance chapter. i have no any idea on that device, pls!!! thanks!!!

Jul 03, 2008 | Brother DCP 130C All-In-One InkJet Printer

2 Answers

Unable to clean


unable to clean troubleshooting maintenance user guide

Jun 13, 2008 | Brother DCP 130C All-In-One InkJet Printer

1 Answer

Will not print


What 2 digit error code does the machine display, too?

May 12, 2008 | Brother DCP 130C All-In-One InkJet Printer

2 Answers

Unable to print


press menu then start mono (blue button) then fourtimes arrow up (tel-index). Machine will be in maintenance mode and lights will flash. What error code does the machine display?

(to leave the maintenance mode press 9 then 9)

Nov 26, 2007 | Brother MFC 210C All-In-One InkJet Printer

1 Answer

Not printing


Sure. Its a new common problem of brother printers. The paperjam lifted the encoder strip (a foil strip) out of position. The encoder strip gives positioninfo to the printhead. You have to disassemble the printer and simply fix the encoder strip in its position upon the printhead. To avoid this prob in future stick a 3cm tape with a 1cm plastic strip in the middle onto the position where the encoder strip runs thru the printhead. The plastic foil avoids a sticking contact of the encoder strip.

Oct 01, 2007 | Brother DCP 130C All-In-One InkJet Printer

Not finding what you are looking for?
Brother DCP 130C All-In-One InkJet Printer Logo

1,360 people viewed this question

Ask a Question

Usually answered in minutes!

Top Brother Office Equipment & Supplies Experts

James Cagle
James Cagle

Level 2 Expert

481 Answers

Jim Keysor

Level 2 Expert

331 Answers

ctnozil

Level 2 Expert

270 Answers

Are you a Brother Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...