Question about Radio Communications

Open Question

I have a bearcat 145XL. I can turn it to weather and hear that just fine, but not hearing any calls. All codes are correct

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
NickBeamAA
  • 53 Answers

SOURCE: Can't hear caller

The earpiece speaker has gone bad. Unless you have access to a replacement speaker and can solder you will have to take the phone to you nearest Motorola service center.

Posted on Sep 06, 2007

Ad
  • 2 Answers

SOURCE: Can't hear callers, but they can hear me

The problem might be the hearing volume. As far as I know, the only way to change it is in the middle of a call.

Here's what you should try...

1) Call someone.
2) Using the silver button on the left side of the phone, press the up arrow key a few times until the volume is all the way up. It will say "Hearing Volume".

Hopefully that will solve the problem and your phone will be working fine.

Posted on May 21, 2008

  • 1 Answer

SOURCE: how to program a uniden bearcat bc 145xl 16 channel scanning radio

I'am having a problem. I do not have codes for a uniden bearcat 145 xl 16 channel, can someone help me please?

Posted on Aug 03, 2008

  • 1 Answer

SOURCE: Cannot hear incoming call or caller cannot hear me

cannot hear incoming calls or outgoing calls


Posted on Apr 08, 2009

volpe_42
  • 35 Answers

SOURCE: Progamming instructions for Uniden Bearcat 145xl

Try this link.

Now depending on where you live and what you are planning on listening in on there can be a couple of things that you may need to take into consideration.
First in some areas it is illegal to listen in on Police Frequencies.

And Second is that there has been a large number of areas moving their Emergency transmissions over onto Trunked Systems which I don't think your Scanner Handles.

Posted on Jan 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I need a schematic for this scanner


This site says they have them but you have to sign up to receive the free download.

platformusers net

Oct 29, 2015 | Uniden Bearcat BC 145XL 16 Channel Scanner...

1 Answer

Looking for manual


Thank you for being a loyal customer; unfortunately, as we no longer manufacture this unit, we do not have the owner's manual. You can try running a google search for it or it can be purchased from Vintage Manuals: http://www.vintagemanuals.com/manuals.php?manufacturer=BearcatĀ¢er=

May 30, 2015 | Uniden Bearcat 16 Channel Scanning Radio...

1 Answer

HELP with bc350c scanner, won't pick up feeds


Sounds like an antenna problem. Remove your back-of-set antenna and see if reception changes. If it's the same or nearly the same, check the antenna solder connections inside the set and resolder if necessary. You might also try an outdoor antenna or one of the indoor/outdoor units that's enclosed in PVC pipe. These are fairly inexpensive and can be found on eBay or other sources.

Nov 28, 2009 | Uniden BC350C Base Scanner

1 Answer

Bearcat 140 scanner.It will scan but will not pick up any signals,even witha tower antenna? none at all and not myweather channels also.


If you are good with electronics, go to www.mods.dk. They have an alignment manual for the Bearcat 140 series that also includes troubleshooting advice and schematics.

Use the manual for the Bearcat 145XL. It is virtually the same radio as the 140.

The link to the file is:
http://www.mods.dk/downloadmanual.php?RefFil=BC-145XL_Alignment.zip&radio=

Sep 28, 2009 | Uniden BC244CLT Base Scanner

2 Answers

BEARCAT BC 175 XL--Where might I download manual? Thanks


hi . i w given a Uniden Bearcat 175XL 16 channel scanning radio. the OPERATION buttons are: PRI SPEED WX LIMIT SRCH HOLD DELAY LOCKOUT and in orage color: SCAN MANUAL. please help. the only thing i can get to hear is the WEATHER CHANNEL. i cant even hear the squelch. can u help

Mar 21, 2009 | Uniden BC340CRS Base Scanner

1 Answer

Help with programing my scanner


If you don't hear the weather the scanner is malfunctioning & needs to be repaired. If you live near NJ, call 973-831-5900 to speak to a tech familiar with Bearcat scanners.

Aug 01, 2008 | Uniden BC248CLT Base Scanner

5 Answers

How to program a uniden bearcat bc 145xl 16 channel scanning radio


I'am having a problem. I do not have codes for a uniden bearcat 145 xl 16 channel, can someone help me please?

May 31, 2008 | Health & Beauty

4 Answers

Programming Bearcat BC 55XLT Scanner


Ok doc, I'll see if I can walk you thru this as there don't seem to be a manual available for download.
* Push manual button and bring it around to channel #1
Enter the freq including the decimal point. Push the E button to enter the freq into the first channel.
* Push manual again and move to channel #2 and repeat.
If you need some new freq's for your area, go here, click on your state, county, and it'll give you a complete rundown.
http://www.radioreference.com/apps/db/

If you need 10 codes for your area, go here and click on your state.
http://www.nat-com.org/radio.htm
If you need anything else, let us know,, Mechanic

Feb 19, 2008 | Radio Communications

Not finding what you are looking for?
Radio Communications Logo

Related Topics:

23 people viewed this question

Ask a Question

Usually answered in minutes!

Top Radio Communications Experts

eradiostore
eradiostore

Level 3 Expert

1655 Answers

Brad Brown

Level 3 Expert

18072 Answers

Mike Charette

Level 3 Expert

1847 Answers

Are you a Radio Communication Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...