Question about Uniden Lands Phones

Open Question

How to register hand set of Uniden reveal 1260 with its base as I dont get the tone of my landline. Power is connected

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 39 Answers

SOURCE: uniden hand set

What is the model # of your handset. It must be tcx 900 or tcx 905 to be compatible with the tru 9488. Good luck! :)

Posted on Mar 17, 2009

Ad
  • 1 Answer

SOURCE: i had a uniden 5.8 cordless phone with 2extra hand

problem solved threw uniden in trash and bought another brand

Posted on Nov 24, 2009

jyackle5
  • 8197 Answers

SOURCE: Just bought a DECT1588 seies

HAve you tried to plug in to a difrent plug to see if you have power. Also you do not need Surge Bar for the phone.

Posted on Jan 22, 2010

pgh_pa_guy
  • 2992 Answers

SOURCE: will not dial out on landline in the tone mode but

There's something wrong with the base unit that connects to the phone line. It's not sending any audio to the phone line, which would explain why tone dialing doesn't work and people can't hear you. (Pulse dialing doesn't need the audio tones so it will still work.)

I've never run across one doing this before. The problem is almost certainly some electronic failure, and I doubt there's anything you can do other than replacing the thing. If this is still under any warranty it should be up to the manufacturer to repair or replace it. If you got this from VoIP service provider, contact their customer service department.

Posted on Feb 03, 2010

  • 5 Answers

SOURCE: hand set tcx905 will not register

Remove the plastic battery cover from the handset (but keep the a battery connected), then place the handset on the base. That will enable the metal contacts at the bottom of the handset to touch the ones on the bottom of the base.

Posted on Mar 19, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My uniden phone is not working. All hand sets say Check Tel Line. Will not make or receive calls. Will a dead battery in one handset make all handsets malfunction? Are batteries available?


batteries are available from e-bay
one dead battery will not affect any others
all hand sets make calls and receive calls through the base unit that is connected to the landline
base unit is connected to the landline and operates any hand set that is picked up
make sure all handsets have the end call button pressed as one not pressed after use may keep a line open
call your provider to check the land line to your premises
borrow a neighbours phone and plug it into the socket and see it you get a line on their phone

Oct 30, 2016 | Uniden Lands Phones

1 Answer

Uniden D3098S I have 2 register hand sets #1 and #2 I have a 3rd one having trouble registerting it to the base iam 2 feet away from the base unit it says check base power & out of range


Registering a Handset


If you see a "not registered" message on a handset, you must register it to a base before using it.

1. On the base, open the menu and select "Register Handset"

2. On the handset, press and hold POUND (#) until the handset display says "Handset Registering" (about 2 seconds).

3. Wait until the handset display says "Registration Complete" (about 30 seconds), then pick up the handset and press eND/CleaR.

# If you don't hear a dial tone or the display says "Registration Failed" charge the battery completely, then try again.

May 12, 2016 | Uniden Lands Phones

1 Answer

I got new uniden reveal 1260 cordless phone. It does not display any light on the screen. I am getting difficulty in reading the numbers. Is it normal not to have screen light in this set.


According to Uniden, the 1260 is a CORDED phone, not a cordless phone. It needs batteries AND it needs to be plugged into a telephone jack.

Nov 20, 2015 | Uniden Lands Phones

1 Answer

How do you register a old uniden SSE27 handset to a new Uniden SSE37 base


The following is taken directly from the SSE37 owners' manual:

Registering a handset
If you see a "not registered" message on a handset,
you must register it to a base before using it.
1.
On the base, open the menu and select
Register Accy.
2.
On the handset, press and hold #/DND
until the handset display says
Handset Registering (about 2 seconds).
3.
Wait until the handset display says
Registration Complete (about 30 seconds),
then pick up the handset.
If you don't hear a dial tone or the display says
Registration Failed, charge the battery completely,
then try again.


Good luck!

Feb 19, 2015 | Uniden Lands Phones

1 Answer

Uniden reveal 1260 cordless. Busy phone line


Ring tone not working due to cross on ring tone icon
Uniden reveal 1260 cordless. Busy phone line

Oct 05, 2012 | Lands Phones

1 Answer

Uniden 2.4 GHz cordless phone won't register to base


Same happened to me. Unplug the base from power and the phone line for 30 minutes. Same for the handsets - all. Take out the batteries. Retry. After it says 'registration failed'. Leave it in the cradle. Several minutes later it found itself.

Mar 10, 2009 | Uniden 2.4 GHz Cordless Phone System

1 Answer

Adding a new handset


You need to register the new handset with the base.
In Global settings De-register the new handset then place it on the main base unit connected. It should then register.

Jun 30, 2008 | Uniden TRU8885 Cordless Phone

1 Answer

Handheld won't communicate with the base


i have the same problem and it has happened infrequently several times. you probably have to deregister the handset and re-register it and rest the base and handheld to communicate since my model is different from yours there may be differences in how to go about it but for my model the suggestion is as follows:

go to www.uniden.com for customer support here is a direct link to some frequentlt asked questions http://www.mycusthelp.com/uniden/supportfaq.asp?sSessionID=&lstFilter_a=&lstFilter_b=&lstFilter_c=&txtCriteria=hanset+won%27t+connect+to+base&optcond=2&iStartCount=1


DCT Series Multi Handset Phone - reset to have base and handsets communicate

Question:
0.gif
I have a DCT Series Multi Handset phone and one or more of the handsets is not working, what should I do?
0.gif
Answer:
0.gif
Try resetting the phone system by using the following steps:

1) Enter the "System Reset" menu, then "Deregister HS" submenu.
2) Press volume/up or down arrow keys to select the handset ID to be de-registered from the list, then press the OK soft key.
3) Press the OK soft key. You will hear a confirmation tone. When de-registration is complete, "Deregistration Complete" appears.

4) After de-registering the handset, move to "Replacing the Base Setting" below. When you go through the deregister procedure if you get "out of range", That is okay. Go ahead and go to the next step.

Replacing the Base Setting
1) Enter the "System Reset" menu, then "Replacing Base" submenu. "Do you want to replace Base?" appears.

2) Press the OK soft key. You will hear a conformation tone. The base information will be deleted. When replacing the base is complete, "Please Register" appears, register the handset to the new base.

If your handset is reading out of range. Check the the main base and make sure you unit has power. This can be done by placing the handset in the main base to see if the charge in use light comes on.
If your main base isn't getting power please make sure the ac adapter is plugged in and is warm to the touch. If not the ac adapter would be damaged.
To resolve out of range follow the below steps.
Press and hold the end key.
Press and hold the # key.

Release the keys and select replacing base and press select.
You will see Replace base?
Select Yes and press select.
Now place the handset on the base and it should register to the base and allow for calls to be made.
0.gif

Jan 23, 2008 | Uniden CXAI5198 Corded Phone

1 Answer

Registering a GE phone


Just before you start using it, place it in it's charger base. Then it is registered. It is nothing but, establishing a connection between the base & the hand set. This is done only once. You may have do this again if there is a power failure.

Sep 07, 2007 | Uniden Cordless Phone

Not finding what you are looking for?
Lands Phones Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Uniden Lands Phones Experts

k24674

Level 3 Expert

8081 Answers

Cindy Wells

Level 3 Expert

6026 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18429 Answers

Are you an Uniden Lands Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...