Question about Hitachi 42EDT41 42 in. HD-Ready Plasma Television

1 Answer

From max tv

I have 42edt41 hitachi sound is ok, no picture i try new power supply
and y sus board and same problem any help?

Posted by on

  • tazz1243 Dec 25, 2007

    same thing with my TV sound is fine but there's no picture



1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 6 Answers

Ok is the monitor u need to replace the lower board of the tv and thats it and u are done enjoy

Posted on Feb 28, 2008


1 Suggested Answer


6ya staff

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Hitachi 42EDT41 42 in. HDTV-Ready Plasma

The Tech you had come out could be dead-on from what you've described... It could also be a bad connector. I've attached a couple of photos here to my explanation. One is a picture of what I am guessing you see on your screen when you power it up. If correct, you could possibly take a look at a line connector between the joint and formatter power board yourself and see if any of this is damaged. To answer question more pointedly, (1) There are more than three boards inside, actually nine major board modules to be exact. (2) The Y SUS board, Hitachi p/n#TS05679, without going into great detail, determines the image position on the screen. (3) Cost - - Tritronics has this board at a list price of $436.22 and they are not as easy as they might appear to a layman to change...

Jun 13, 2007 | Hitachi 42EDT41 42 in. HD-Ready Plasma...

1 Answer

The screen on my Hitachi 42EDT41 went blank. I still have sound, but no image. POssible problems/solutions? Thank you!

This is a common plasma tv problem. I changed the Y-sustain board and the Z-sustain board and that fixed my "sound, but no picture" problem. You can find both boards on ebay; the Y-sus board is around $100 and the Z-sus is around $50. Hope this helps.

Dec 08, 2009 | Hitachi 42EDT41 42 in. HD-Ready Plasma...

2 Answers

I have a Hitachi tv and tonight the screen went blank but the voice remained on. does anyone know how I can fix it????

Usually it is the Y-sus that has the problem. This is one of the boards that sustain the picture on the screen.

For this particular issue, there could also be issues with the y-drives and Z-sus. The way to find out for sure is to take the voltages (Va, Vs, Vcc, etc) on the boards and matching them up with the specified values on the panel.

Oct 13, 2009 | Hitachi 42EDT41 42 in. HD-Ready Plasma...

1 Answer

No picture on a hitachi 42edt41

do you have sound but no picture or you dont have sound and picture? if you have sound you need to buy the inverter but if you dont have sound and picture you need to buy the main board

Aug 13, 2009 | Televison & Video

1 Answer

42edt41a hitachi plasma tv went dark sound ok

sounds like your y and z drive boards over heated and need replacing...

May 31, 2009 | Hitachi 42EDT41 42 in. HD-Ready Plasma...

1 Answer

Was getting black alternating vertical lines about 2 inches wide

it was probabily the Y-Sus board, that is what usually causes this broblem

Jan 11, 2009 | Hitachi 42EDT41 42 in. HD-Ready Plasma...

1 Answer

I have sound but no picture,

I think you might have a bad y-sus board

Sep 29, 2007 | Hitachi 42EDT41 42 in. HD-Ready Plasma...

1 Answer

Missing voltage?

alot of voltage adjustments at that high voltage are likely from another source that develops it like the the swith-mode power supply upstream on power supply board that feeds it ..look for burnt resistors in this case.. I bet your in the wrong circuit but u can test all wires and pins coming in for 200 volts. get a schamatic of it and find a good tech if u dont know what i am saying. ty crazylarry

Jun 27, 2007 | Hitachi 42EDT41 42 in. HD-Ready Plasma...

Not finding what you are looking for?
Hitachi 42EDT41 42 in. HD-Ready Plasma Television Logo

Related Topics:

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hitachi Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76143 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Todd Hill
Todd Hill

Level 2 Expert

433 Answers

Are you a Hitachi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides