Question about Samsung Office Equipment & Supplies

Open Question

I have installed a new printer. now it is a error state. and it wont uninstall,tried for 5 hours it just sits there

It is a xpress M2020 samsung

Posted by on


6 Suggested Answers

  • 2 Answers


Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 202 Answers

SOURCE: Epson Twain 5

Earl, Make sure you disable all antivirus software before install or uninstall the drivers. You may need to do the same with any heavy-duty spyware or firewall. Once its installed turn all protection back on. You may need to unplug the scanner and start out fresh. Make sure you download and install the newest drivers from the epson site. Good Luck, Tim

Posted on Feb 05, 2007

  • 1605 Answers

SOURCE: communication error

uninstall the software.
procedure must be follow. otherwise it will not work.
first. turn off the printer. unplugged fromt the wall.

1). install the software with printer disconnected.
2). turnoff the printer and connect the cable to the computer.
3). turn on the printer.

if you are using USB. makse sure the USB is working.

Posted on Oct 20, 2008

  • 734 Answers

SOURCE: my samsung nv 5 camera says card error and wont read memory cards

Please specify the err code your camera getting 

Posted on Nov 14, 2008

  • 2715 Answers

SOURCE: %Build Template Error Message% when trying to ininstall

Try this. Install the Dell printer software again,Link below, then go to the add printer through the control panel. Highlight the Dell. On the left side it says "'Delete printer?" Click on it. You may want to even try this first before reinstalling.

Posted on Feb 17, 2009

  • 702 Answers

SOURCE: Uninstall HP image zone 5.3 installation - error installing hp c7280

Did you try an uninstaller program?

Also check out this article about fixing uninstall errors.

Posted on Apr 23, 2009

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Samsung RF265AARS 6 years old been sitting unplugged 5 years wont start

Remote chance fridge is on defrost cycle but more likely the compressor has seized.
Have it check by a qualified tech.
It's usually cheaper to buy another fridge than to have the compressor replaced and new refrigerant installed.

Nov 02, 2017 | Samsung Refrigerators


Error on Samsung Dishwashers - my fix tip

My new dishwasher, recently got the error where the "heavy" light started blinking during a cycle. The research shows it says water in the pan, which states you have to remove dishwasher and get the water out of the pan or blockage out of the lines, if there is one. A very disturbing thing in that you basically have to uninstall it and re install it. Instead I unplugged it, left it that way for 48 hours, plugged it back in and waited another 24 hours before trying to use it. Have used it successfully ever since.
Not sure this will always work, but it sure is worth a try to reset things simply rather than doing an install. Figured if I had to uninstall it and re install it, I would just get another dishwasher while I continue to fight with Samsung about their lousy customer service and support for their products. Esp since these items are only a few months old and we got a 4 piece bundle. Worst case scenario, we have to get a lawyer and file a lawsuit....if so, I'll make it a class act one.

on Jan 26, 2017 | Miscellaneous

1 Answer

How do i fix the error on y printer that says scanner is locked samsung printer Xpress M2070FW

dear lydia
the scanner is may try with knocking lightly on your both palm at the top of platen cover. some time this releases the jam. if persists call trained person to re assembly the set.

Mar 05, 2015 | Samsung Xpress M2070FW Multifunction...

1 Answer

Spl-c error undefined command appearing on printed sheet. refuses to print any document

I get the same message on my Samsung Xpress C410w wifi connected printer. No cable to replace - now what ?

Nov 24, 2011 | Samsung CLP 300 Laser Printer

1 Answer

Problem opening QuarkXPress 5

you need to uninstall the previouse version and then install the newer version

Apr 13, 2010 | Computers & Internet

1 Answer

Installation issues with lexmark z2420 wireless printer

I had a problem with mine also. It kept giving me an unsupported cartridge error. I finally took it back to the store and exchanged it. The replacement works fine.

Feb 11, 2009 | Lexmark Z2420 Printer

1 Answer

Unable to print

With the Lexmark printers communication subsystem you MUST let the driver ask for you to plug in the printer. DO NOT plug the printer into the USB port until told to do so.

To fix a fouled install :
(1) Uninstall the Lexmark drivers in Add Remove Programs
(2) Shutdown the computer
(3) Disconnect the printer from the USB port
(4) Restart the computer
(5) Run the Driver Installation software
(6) Cancel ALL attempts by windows to auto install the printer
(7) When the sofware asks for the printer connect it and continue

Sep 07, 2008 | Lexmark X73 All-In-One InkJet Printer

Not finding what you are looking for?

Open Questions:

Office Equipment & Supplies Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Office Equipment & Supplies Experts


Level 3 Expert

2239 Answers

Steve Allison
Steve Allison

Level 3 Expert

5569 Answers

Lawrence Singapore

Level 1 Expert

70 Answers

Are you a Samsung Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides