Question about Samsung Dishwashers

Open Question

This is my first time using my Samsung dishwasher and I noticed the "Low Rinse" light is on, should I be concern?

Posted by on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 39 Answers

SOURCE: My Frigidaire dishwasher leaks the rinse agent

it may leak because:
1. Seal is bad. (o-ring?)
2. a spring on mechanism may be loose, missing or broken.
3. the container that holds the fluid may be cracked.

find schematic and parts for you model number here:
appliancepartspros.com

Posted on Nov 02, 2009

Ad
  • 4 Answers

SOURCE: PLD4555RFC: Low Rinse Agent Light Will Not Go Out

I've disconnected the sensor in the dispenser for my new Frigidaire dishwasher. The setup is too unreliable in my opinion and is a potential source of headaches. I had the same problem. I studied the design and it's too easy for the floating magnet sensor in the rinse aid reservoir to stick thereby not actuating what is called a reed switch to toggle the control card LO ckt light. Mine has the electronic control front panel.

Posted on Aug 03, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

When start a normal wash, it runs through wash, low rinse, normal, then goes to a non-flashing start auto button.


Hello. Please study the attached photos...the error codes for your model are displayed. Ignore the low rinse aid light. Please let me know if you need further assistance! Thanks!
25985280-4s344ovlbnk1ofxeqxwuleop-1-0.jpg

25985280-4s344ovlbnk1ofxeqxwuleop-1-1.jpg

25985280-4s344ovlbnk1ofxeqxwuleop-1-3.jpg

Nov 29, 2015 | Samsung 24 In. Stainless Steel Dishwasher...

2 Answers

What does the snowflake mean


Cold Rinse? The plates come out ready to use rather than being hot.

Aug 13, 2015 | LG Dishwashers

1 Answer

'low rinse' stuck on with full rinse aid, can't start wash cycle


Actually, if you look closely at that Low Rinse button or emblem, you will see a little lock symbol above the words "Low Rinse", and I'll bet THAT light is the one that is on. Basically, you have the control lock (or child-lock) turned on. To turn it off, you have to press and hold the Sanitize button for 3 to 5 seconds until that light goes off. Now your dishwasher will work!

If you need further help, reach me via phone at https://www.6ya.com/expert/ronald_e6b9572cebe3ad27

Mar 11, 2015 | Samsung DMT400RHS Builtin Dishwasher

1 Answer

'low rinse' stuck on with full rinse aid, can't start wash cycle


Actually, if you look closely at that Low Rinse button or emblem, you will see a little lock symbol ABOVE the words "Low Rinse", and I'll bet THAT light is the one that is on. Basically, you have the control lock (or child-lock) turned on. To turn it off, you have to press and hold the SANITIZE button for 3 to 5 seconds until that light goes off. Now your dishwasher will work!

If you need further help, reach me via phone at https://www.6ya.com/expert/ronald_e6b9572cebe3ad27

Mar 11, 2015 | Samsung DMT400RHS Builtin Dishwasher

1 Answer

How do i unlock my samsung dishwasher


It depends on the model. For example, IF you have a DMT400 series, although the light ABOVE the Low-Rinse-Aid light is lit, you press and hold the SANITIZE light for 3 to 5 seconds. Other models are different, but if you look closely at your dishwasher control console, you should see some small print that will say something like "Child lock/unlock, (Hold 3 sec)".

If you need further help, reach me via phone at https://www.6ya.com/expert/ronald_e6b9572cebe3ad27

Mar 01, 2015 | Samsung Dishwashers

1 Answer

HOW TO CHANGE FROM LOW RINSE TO HIGH RINSE


Fill up the rinse-aid resevoir. Or (depending on exactly what you are asking), turn the little indicator just inside the rinse-aid fill port to a higher number.

If you need further help, reach me via phone at https://www.6ya.com/expert/ronald_e6b9572cebe3ad27

Feb 22, 2015 | Samsung Dishwashers

1 Answer

How do I change from low rinse to another rinse on my Samsung dmt610rhs dishwasher


Fill up the rinse-aid resevoir. Or (depending on exactly what you are asking), turn the little indicator just inside the rinse-aid fill port to a higher number.

If you need further help, reach me via phone at https://www.6ya.com/expert/ronald_e6b9572cebe3ad27

Feb 22, 2015 | Samsung Dishwashers

1 Answer

I have an Electrolux Dishwasher that always starts on low rinse


Hello Friend, this is Z. Thank you for your post!

I see that your Electrolux dishwasher starts cycle on low rinse. This typically indicates your dishwasher has low rinse aid. The RINISING AGENT LOW light, typically located near the Rinse Only Pad, comes on at the end of cleaning cycle when the rinse agent reservoir is low. The light will remain on through 5 successive cycles or until the reservoir is filled. Also, using rinse aid will enhance dryer performance and reduces water sports and filming. Hope this helps!

Jun 04, 2014 | Electrolux Dishwashers

1 Answer

Rinse temperature too low


your right dont guess the board is bad!

Aug 08, 2012 | Hobart AM14C-155 Dishwasher

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Dishwashers Experts

vince

Level 3 Expert

1234 Answers

gbob59

Level 3 Expert

3042 Answers

Cindy Wells

Level 3 Expert

5964 Answers

Are you a Samsung Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...