Question about HP LaserJet 4L Printer

1 Answer

HP laserjet 4L paper jam after printing one page.

I have a hp laserjet 4L and the printer will print one page and then the next page, the printer will jam. I open the paper tray and the jammed paper is half in the process of printing and half still in the tray, so i pull the sheet of paper out and reload it and it'll print one page again, until the next page and that page will jam up. I feel as if the printer picks up the paper crooked, even tho i loaded the paper in the paper tray correctly. Please help!

Posted by on

  • danny_che Aug 31, 2009

    Can i buy the pick up rollers myself and replace it myself? If so where can i buy the pick up rollers and find the instructions on how to replace them?

  • Jamie Yeng Aug 07, 2012

    I have the exact same problem with my HP LaserJet 1020. Only mine is, I order to print 1 page, but it will end up rolling up 2nd page (not printing on it) and then jam exactly half way. Try to print 1 more copy, it'll do the same. So I always end up having half page jammed after every single print. It's frustrating...

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 40 Answers

You need the pick up rollers replaced. Call your service centre to replace pick rollers as these are feeding the pages crocked

Posted on Aug 31, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hp Color Laserjet 1600 says Jam in tray 2 bt there is not paper jams


Open the paper feed area and the printer, examine the paper feed path and make sure there isn't a page or piece of paper jammed in the path somewhere.

Aug 21, 2014 | HP Color LaserJet 1600

1 Answer

My HP Laserjet 4L has started jamming paper when I try to print more than one page.


Here is some tips to avoid paper jam..

  • If your printer has a paper tray do not fill the tray to capacity. If you're encountering frequent paper jams, reduce the amount of paper you place in the tray each time it is filled.
  • Make sure you or the tray feeding the paper into the printer is aligned properly and the slider used to hold the paper in place in the tray is snug with the paper. Many printers have sliders that allow different types and sizes of paper to be fed into the printer. If the slider is not properly positioned it can cause paper jams.
  • Use standard office paper; folded paper, paper with labels, and specialty paper such as hard bound paper can often cause paper jams. If you're uncertain with what paper you should use with your printer your printer documentation will list the paper compatible with your printer.
  • Do not mix the paper you're feeding into the printer at one time. If you need to change the paper or size of paper being used removed any other paper currently in the printer before inserting the new paper.
  • If your printer uses a slot or tray for the paper make sure to not push the paper too far into the slot or tray.
  • Examine the printer for any previous stuck paper in the printer. Previous paper jams, torn paper, printing labels or other foreign objects in the printer can cause reoccurring printer jams.


**If you need any kind of technical assistance you can contact support cell at here

Feb 26, 2013 | HP LaserJet 4L Printer

1 Answer

LOCATION OF PRINTER SENSOR


Jams

Clearing jams

CAUTION Do not use sharp objects, such as tweezers or needle nose pliers, to remove jams.
Damage caused by sharp objects will not be covered by the warranty.

CAUTION Always pull jammed media in the direction it would travel through the paper path.
Do not pull jammed media against the direction of travel through the paper path to avoid damage
to the printer.

To prevent damage to the printer when clearing jams, including jams in the output bin, always open the
print-cartridge door and remove the print cartridge. Keep the door open and the cartridge out until the
jam has been cleared. Opening the print-cartridge door and removing the print cartridge relieves tension
on the printer rollers, which prevents damage to the printer and makes the removal of jammed pages
easier.

Occasionally, media becomes jammed during a print job. You are notified of a media jam by an error
from the software and the printer control panel lights. See Control-panel lights (HP LaserJet 1010 series
printers) on page 102 or Control-panel lights (HP LaserJet 1020 printer) on page 106.

The following are some of the causes of media jams:

?

The input trays are loaded improperly or are too full. See Loading media on page 25.

NOTE When you add new media, always remove all of the media from the input tray and
straighten the stack of new media. This helps prevent multiple sheets of media from feeding
through the printer at one time, reducing media jams.

The media does not meet HP specifications. See Media specifications on page 21.

?

Typical media jam locations

?

?

?

Print cartridge area: See Removing a jammed page on page 43.

Input tray area: If the page is still sticking out of the input tray, gently try to remove it from the input
tray without tearing the page. If you feel resistance, see Removing a jammed page on page 43.

Output path: If the page is sticking out of the output bin, see Removing a jammed page


NOTE There might be loose toner in the printer after a media jam. This toner clears up after
a few sheets are printed.

Removing a jammed page

Use the procedures in this section to remove a jam.

CAUTION Media jams might result in loose toner on the page. If you get any toner on your
clothes, wash them in cold water. Hot water will permanently set the toner into the fabric.


Partshere Troubleshooting

CAUTION To prevent damage to the printer when clearing jams, including jams in the output
bin, always open the print cartridge door and remove the print cartridge.

To prevent damage to the print cartridge, minimize its exposure to direct light. Cover the print
cartridge with a sheet of paper.

NOTE The following illustrations show the HP LaserJet 1020 printer. The same procedure is
used to remove a jam in the HP LaserJet 1010 series printers.

1

Open the print cartridge door, and remove the print cartridge.

2

Grasp the middle edge of the side of the media that is most visible, and carefully pull it free from
the printer.

CAUTION Do not use sharp objects, such as tweezers or needle nose pliers, to remove
jams. Damage caused by sharp objects will not be covered by the warranty.

CAUTION Always pull jammed media in the direction it would travel through the paper path.
Do not forcefully pull jammed media against the direction of travel through the paper path to
avoid damage to the printer.


3

When you have removed the jammed media, replace the print cartridge, and close the print cartridge
door.

After clearing a media jam, you might need to turn the printer off then on again.

NOTE When you add new media, remove all of the media from the input tray and straighten
the stack of new media.

Sep 25, 2011 | HP LaserJet 1020 Printer

1 Answer

HP 4L printer indicates no paper when the tray has


When you removed the paper jam, was the paper torn? If so, did you ensure that you found all the pieces. (Put the piece of paper back together like a puzzle to verify). There could be a piece of paper stuck in the printer that is causing the paper sensor to fail.
The other possibility is that when you removed the paper jam, something became dislodged in the printer. Forcefully removing paper from the printer can cause this.

Jul 16, 2009 | HP LaserJet 4L Printer

1 Answer

HP LJ P3005 13.31.00 ERROR


Hi,
As i can understand whenever you try to print with rear door closed printed page should come on top from top output roller however paper gets jammed.
Solution:
Try to print a page using rear door open and it should come out from the rear drop down tray it printed page comes out successfully with rear flap open than paper gets jammed at top due to faulty top output roller.
However if the paper gets jammed at fuser with rear door closed than it is issue with fuser in that case you need to get fuser replaced at the same time replace 20 tooth gear next to fuser.

Thanks and Regards
Neeraj Sharma

Apr 11, 2009 | HP LaserJet P3005n Printer

2 Answers

Grinding Sound - Orange Paper Jam Light


You have a broken gear main motor. I had the same problem, bought $5 part and after the replacement of the gear,it runs like new

Dec 04, 2008 | HP LaserJet 4L Printer

1 Answer

Paper jam


Remove the toner, and try to gently pull out the paper jam.. If the page gets torn, or ripped, make sure you have all the pieces of the paper removed. Then re-start the printer. Print a test page to make sure the paper path is clear..

Nov 21, 2008 | HP LaserJet 4L Printer

1 Answer

Paper too thick?


You will need to use the manual feed and insert the cardstock one page at a time. First look at the rear of the printer for a purple dial. Roll the dial downward. This will allow the printer to exit straight out the back of the machine. Allow enough room at the rear of the printer so the cardstock doesn't hit anything on the way out. Next look at the front of the machine at the **** just above the paper tray. You'll see an envelope icon. Align the cardstock when manual feeding one sheet at a time to the left side of the **** next to the envelope icon. When you hit "file, print" select MANUAL FEED in the print window.

The 4L will only do cardstock by one at a time in the way noted above as the feed system isn't strong enough to make the sharp bend coming out of the tray or in the back to bend it around and into the top tray.

Sep 22, 2008 | HP LaserJet 4L Printer

1 Answer

HP Laser Jet 4L Printer Model #C2003


Try lowering the toner density using the printing software or the printer menu.

Feb 03, 2008 | HP LaserJet 4L Printer

Not finding what you are looking for?
HP LaserJet 4L Printer Logo

686 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

Clive
Clive

Level 3 Expert

4345 Answers

Ekse

Level 3 Expert

13434 Answers

Thomas F. Schneider

Level 3 Expert

2715 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...